DDX371 Kenwood Manual

The Kenwood DDX371 is a 6.2-inch DVD receiver with built-in Bluetooth, USB connectivity, AM/FM tuner, support for various media formats, rearview camera input, smartphone connectivity, and customizable audio/video settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 6.2-inch touchscreen display, DVD receiver, Bluetooth connectivity, USB port, AM/FM tuner, rear camera input, remote control.

Feature	Description
Display	6.2-inch WVGA touchscreen
Bluetooth	Hands-free calling and audio streaming
USB Port	For media playback and device charging
DVD Player	Plays DVD-Video, CD, MP3, WMA formats
AM/FM Tuner	30 station presets (18 FM, 12 AM)
Camera Input	Rearview camera compatibility
Audio Output	4-channel 50W x 4 max power
Smartphone Connectivity	Compatible with various smartphone apps
EQ Settings	Customizable sound profiles
Steering Wheel Control	Compatible with most steering wheel controls

Installation

Professional installation recommended. Ensure vehicle is parked and ignition is off.

1. Disconnect negative battery terminal for safety.
2. Remove factory radio using appropriate tools.
3. Connect wiring harness following color codes.
4. Connect antenna cable and other inputs (USB, camera).
5. Secure unit in dashboard and reassemble trim.
6. Reconnect battery and test all functions.

WARNING! Always disconnect battery before installation. Incorrect installation may damage vehicle electronics.

First-Time Setup

Power on unit; follow initial setup prompts.

1. Language selection: Choose preferred language (default ENGLISH).
2. Clock setting: Set current time and date.
3. Radio presets: Scan and save favorite stations.
4. Bluetooth pairing: Connect smartphone for hands-free operation.
5. Audio settings: Adjust EQ, balance, and fader to preference.
6. Display settings: Set brightness and contrast.

CAUTION! Do not operate while driving. Park vehicle for initial setup.

Specifications

• Display: 6.2-inch WVGA TFT LCD touchscreen
• Power Output: 50W x 4 channels (max)
• Tuner: AM/FM with 30 presets
• Supported Media: DVD, CD, MP3, WMA, WAV, AAC
• Bluetooth: Version 2.1 + EDR
• USB: 2.0 compatible
• Video Input: Rear camera (NTSC/PAL)
• Dimensions: 178mm x 100mm x 153mm
• Operating Voltage: 14.4V DC (12V DC negative ground)

Controls and Settings

Access settings via touchscreen menu or remote control. Front Panel: POWER, EJECT, SOURCE, VOLUME knob.

Touchscreen Controls: Home, Audio, Video, Setup, Phone, App. Remote Control: All basic functions plus numeric keypad.

Audio Settings: EQ (Flat, Powerful, Natural, Vocal), Bass, Treble, Balance, Fader. Display: Brightness, Contrast, Color, Screen Off. System: Language, Beep, Reset, Illumination. Bluetooth: Pairing, Phonebook, Call History. Camera: Guide lines, Mirror image.

Connecting Devices

USB: Connect flash drives or smartphones. Bluetooth: Pair mobile devices. Camera: Connect rearview camera.

1. Ensure unit is powered on and vehicle is in park.
2. Connect USB device to USB port.
3. For Bluetooth: Enable pairing mode and search for "KENWOOD" on your device.
4. Camera: Connect to camera input when vehicle is in reverse.

Tip: Use high-quality cables for best performance and reliability.

Playing Media

Supports DVD, CD, USB media, and Bluetooth audio streaming.

1. Insert disc: Press EJECT, load media face down.
2. USB: Connect device, select USB source from menu.
3. Playback: Use touchscreen controls for play, pause, skip.
4. File navigation: Browse folders and files through directory.
5. Repeat/Shuffle: Available for audio files and playlists.
6. Video playback: DVD and compatible video files from USB.
7. Radio: Manual tuning or preset selection.

WARNING! Do not watch video while driving. Park vehicle for DVD viewing.

Bluetooth Connectivity

Hands-free calling and audio streaming capabilities.

1. Enable Bluetooth on your mobile device.
2. Select "Phone" on unit and choose "Pairing".
3. Select "KENWOOD" from your device's Bluetooth list.
4. Enter PIN if prompted (usually 0000 or 1234).
4. Accept pairing on both devices.
5. Sync contacts and call history if desired.

Features: Voice dialing, call waiting, mute, transfer call between phone and unit.

Care & Maintenance

Clean screen with soft, dry cloth only. Avoid chemical cleaners.

CAUTION! Do not use abrasive materials or liquids on touchscreen. Keep discs clean and free of scratches.

Regulatory Information

FCC Part 15: Class B digital device compliant. This device complies with part 15 of FCC rules. Copyright © Kenwood Corporation. Bluetooth is a registered trademark of Bluetooth SIG. For support, visit www.kenwood.com or contact authorized Kenwood service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/ignition	Check fuse and wiring connections; ensure ignition is on
No sound	Settings/connections	Check volume, mute, and speaker connections
Bluetooth not connecting	Pairing/device	Delete old pairing; restart both devices; check compatibility
Disc not reading	Disc/dirty lens	Clean disc; try different media; check for disc damage
Touchscreen not responding	Calibration	Reset unit; clean screen; recalibrate if available
USB not recognized	Format/compatibility	Use FAT32 format; check file compatibility; try different USB device

Reset: Hold SOURCE button for 10 seconds or use system reset in menu.

Service: Contact authorized Kenwood service center or visit www.kenwood.com