DNX7100 Kenwood Manual

The Kenwood DNX7100 is a premium in-dash navigation and multimedia receiver featuring GPS navigation, DVD playback, CD/MP3 playback, AM/FM tuner, Bluetooth connectivity, USB input, iPod integration, touchscreen display, and advanced audio controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 6.95-inch touchscreen display, GPS navigation system, DVD player, Bluetooth module, USB port, iPod connector, remote control.

Feature	Description
GPS Navigation	Built-in navigation with detailed maps and voice guidance
DVD Playback	Plays DVD-Video and DVD-R/RW discs
CD/MP3 Playback	Plays audio CDs and MP3 files
Bluetooth	Hands-free calling and audio streaming
USB Input	Connects USB devices for media playback
iPod Integration	Direct control of iPod devices
AM/FM Tuner	Radio with preset stations
Touchscreen	6.95-inch LCD touchscreen display
Audio Controls	EQ settings, time alignment, crossover controls
Video Output	RCA outputs for additional displays

Installation

Professional installation recommended. Ensure vehicle is parked and ignition is off.

1. Disconnect negative battery terminal for safety.
2. Remove factory radio using appropriate tools.
3. Connect wiring harness following color-coded wires.
4. Connect GPS antenna to clear view of sky.
5. Connect Bluetooth microphone near driver position.
6. Secure unit in dashboard and reassemble trim.
7. Reconnect battery and test all functions.

WARNING! Installation requires automotive electrical knowledge. Improper installation may damage vehicle electronics.

First-Time Setup

Power on unit; follow initial setup wizard.

1. Language selection: Choose preferred language for interface.
2. Time/Date: Set current time and date for accurate navigation.
3. GPS initialization: Allow unit to acquire satellite signals.
4. Bluetooth pairing: Connect mobile phone for hands-free operation.
5. Radio presets: Scan and save favorite radio stations.
6. Audio settings: Configure EQ and sound preferences.

CAUTION! Do not operate navigation system while driving. Pull over to safe location for setup.

Specifications

• Display: 6.95-inch TFT LCD touchscreen
• Navigation: Built-in GPS with detailed maps
• Media Playback: DVD, CD, MP3, WMA, DivX
• Connectivity: Bluetooth, USB, iPod, AUX input
• Tuner: AM/FM with 18 FM/6 AM presets
• Audio: 4-channel, 50W x 4 max power
• Video Output: RCA composite video output
• Power Supply: 14.4V DC (negative ground)
• Dimensions: DIN size (7 x 2 inches)

Controls and Settings

Primary control via touchscreen interface. Physical buttons: POWER, VOLUME, SOURCE, EJECT.

Touchscreen Menus: NAVI, AUDIO, SOURCE, SETUP, PHONE, MAP.

Audio Settings: Equalizer (Flat, Powerful, Natural, Vocal), Bass/Mid/Treble, Loudness, Fader/Balance. Navigation Settings: Route options (Fast, Short, Easy), Avoidances, Map display options. System Settings: Display brightness, Beep sounds, Language, Clock format. Bluetooth Settings: Pairing, Phonebook access, Audio streaming.

Connecting Devices

Multiple connectivity options for external devices.

1. iPod: Connect via dedicated iPod cable for full control
2. USB: Connect USB storage devices for media playback
3. Bluetooth: Pair mobile phones for calls and audio
4. AUX: 3.5mm input for additional audio sources
5. Video: RCA outputs for rear seat monitors

Tip: Ensure vehicle is in park position when connecting new devices.

Navigation Operation

Comprehensive GPS navigation with voice guidance.

1. Destination entry: Use address search, points of interest, or recent destinations
2. Route calculation: Select preferred route type (Fastest, Shortest, Easy)
3. Guidance: Follow turn-by-turn directions with voice prompts
4. Map display: View 2D or 3D map perspectives
5. Detour: Calculate alternative route if needed
6. Waypoints: Add intermediate stops to route
7. Traffic: View traffic information when available

WARNING! Always pay attention to road conditions. Do not operate navigation while driving.

Media Playback

Supports various media formats and sources.

1. DVD: Insert disc for video playback (parking brake required)
2. CD: Play audio CDs with track selection
3. MP3: Play compressed audio files from CD or USB
4. iPod: Control iPod navigation and playback
5. USB: Access music files from USB storage
6. Bluetooth Audio: Stream music from paired devices

Note: Video playback only available when parking brake is engaged.

Care & Maintenance

Proper care ensures optimal performance and longevity.

Use soft, dry cloth for screen cleaning. Avoid chemical cleaners. Keep discs clean and free of scratches. Update navigation maps periodically. Protect from extreme temperatures and moisture.

CAUTION! Do not use abrasive materials on touchscreen. Avoid liquid cleaners.

Regulatory Information

FCC compliant. This device complies with Part 15 of FCC rules. Bluetooth is a registered trademark of Bluetooth SIG. iPod is a trademark of Apple Inc. Kenwood and DNX7100 are trademarks of Kenwood Corporation. For technical support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/ignition	Check power connections and ignition wire
No GPS signal	Antenna placement	Ensure GPS antenna has clear sky view
Bluetooth not connecting	Pairing issues	Delete old pairing and re-pair device
Disc not reading	Disc damage/format	Clean disc; ensure compatible format
Touchscreen not responsive	Calibration needed	Perform touchscreen calibration in settings
No sound	Audio settings/wiring	Check audio settings and speaker connections

Reset: Press reset button with pointed object if unit freezes.

Service: 1-800-536-9663; www.kenwood.com