Kenwood 1060VR Manual

The Kenwood 1060VR is a high-performance car audio receiver featuring CD/MP3 playback, AM/FM tuner with 18FM/6AM presets, detachable faceplate security, 4-channel amplifier with 50W x 4 max power, auxiliary input, CD changer controls, bass/treble adjustments, loudness control, and illumination settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit with detachable faceplate, Remote Control, Wiring harness, Antenna connector, Auxiliary input, CD changer controls.

Feature	Description
CD/MP3 Playback	Supports CD-DA and MP3 encoded discs
AM/FM Tuner	18 FM and 6 AM station presets
Detachable Faceplate	Security feature to prevent theft
Power Output	50W x 4 channels maximum power
Auxiliary Input	For external audio devices
CD Changer Control	Compatible with Kenwood CD changers
Bass/Treble Control	Adjustable audio equalization
Loudness	Enhances low and high frequencies at low volumes
Illumination	Adjustable display brightness
Power Antenna Control	Automatic antenna activation

Installation

Disconnect negative battery terminal before installation.

1. Remove existing radio: Use proper removal tools for your vehicle.
2. Connect wiring harness: Match wire colors (red-ignition, yellow-battery, black-ground).
3. Connect speakers: Front and rear speaker outputs (4 channels).
4. Connect antenna: Plug in vehicle antenna cable.
5. Mount unit: Secure in dashboard using mounting sleeve.
6. Test functions: Reconnect battery and test all features.

WARNING! Ensure proper fuse rating and secure all connections to prevent electrical issues.

First-Time Setup

After installation, configure basic settings.

1. Set clock: Press and hold CLOCK button, use tuning knob to set time.
2. Program radio stations: Tune to desired station, press and hold preset button.
3. Adjust audio settings: Set bass, treble, balance, and fader to preference.
4. Set illumination: Match vehicle interior lighting color.
5. Security: Practice attaching/detaching faceplate.

CAUTION! Always detach faceplate when leaving vehicle unattended.

Specifications

• Power Output: 50W x 4 channels (max)
• CD Playback: CD-DA, CD-R, CD-RW, MP3
• Tuner Section: FM/AM with 18/6 presets
• Frequency Response: 20Hz-20kHz
• Signal-to-Noise Ratio: >90dB
• Separation: >50dB
• Power Requirement: 12V DC, negative ground
• Dimensions: DIN size (178mm x 50mm)
• Operating Temp: -20°C to +60°C

Controls and Settings

Front Panel: POWER/VOLUME knob, SOURCE button, BAND button, AUDIO button, CD slot, Faceplate release.

Remote Control: POWER, VOLUME, SOURCE, PRESET, SEEK, AUDIO, MUTE, Number buttons.

Audio Settings: BASS (-10 to +10), TREBLE (-10 to +10), BALANCE (L9 to R9), FADER (F9 to R9), LOUDNESS (On/Off). Radio: Manual tuning, Seek tuning, Preset memory. CD: Play, Pause, Skip, Repeat, Random play. Display: Dimmer control, Clock setting.

Connecting Devices

Auxiliary Input: 3.5mm jack for portable devices. CD Changer: KCA-S210A compatible.

1. Turn off unit before connecting devices.
2. Auxiliary: Connect audio cable from device to AUX input.
3. CD Changer: Connect control cable and audio cables.
4. Select source: Press SOURCE to cycle through available inputs.

Tip: Use high-quality cables for best audio performance.

Playing Media

Supports audio CDs and MP3 CDs.

1. Insert disc: Label side up into CD slot.
2. Play: Unit automatically begins playback.
3. Skip tracks: Press >> or << buttons.
4. Seek: Press and hold >> or << for rapid search.
5. Repeat: Press RPT for track repeat.
6. Random: Press RDM for shuffle play.
7. MP3 Navigation: Use folder buttons to navigate directories.
8. Eject: Press EJECT button to remove disc.

WARNING! Do not use damaged or irregular shaped discs. Avoid extreme temperatures.

Security Features

Detachable Faceplate: Remove when parking to deter theft. Security Code: Optional code can be set (refer to advanced manual).

Care & Maintenance

Clean faceplate with soft, dry cloth only. Do not use chemicals or abrasive cleaners.

CAUTION! Never insert objects into CD slot. Keep liquids away from unit.

Regulatory Information

FCC Part 15: Class B digital device compliant. This device complies with part 15 of FCC rules. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized Kenwood service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check battery and ignition connections; verify fuse rating.
No sound	Speaker wiring	Verify speaker connections; check audio settings.
CD won't play	Disc format/damage	Ensure compatible disc format; clean disc surface.
Poor radio reception	Antenna connection	Check antenna cable connection; verify proper grounding.
Faceplate won't attach	Alignment/obstruction	Ensure clean connectors; align properly when attaching.

Reset: Disconnect battery for 1 minute to reset unit.

Service: Contact authorized Kenwood service center for repairs.