Kenwood 480SAT Manual

The Kenwood 480SAT is a high-performance satellite receiver with advanced tuning capabilities, built-in digital signal processor, multiple satellite positioning, integrated channel memory, antenna control functions, audio/video outputs, remote control operation, parental lock features, and automatic signal scanning. Powered by 110-240V AC, 50/60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Digital satellite receiver, Remote Control, LNB input, Audio/Video outputs, RS-232 port, Antenna control interface.

Feature	Description
LNB input	For satellite dish connection
Audio outputs (L/R)	Stereo audio output connections
Video output	Composite video output
RS-232 port	For computer connection and updates
Antenna control	Motorized dish positioning
AC input connector	For power connection
Remote sensor	Infrared receiver for remote control
POWER	Turns receiver on/off
MENU	Accesses main menu system
CHANNEL +/-	Channel selection controls

Installation

Unpack and inspect contents. Place on stable surface near TV.

1. Connect satellite dish: Attach coaxial cable from LNB to receiver input.
2. Connect to TV: Use AV cables (video and L/R audio) to TV inputs.
3. Connect antenna motor: If using motorized dish, connect control cables.
4. Plug into AC power.

WARNING! Ensure proper grounding; use surge protector. Keep away from moisture.

First-Time Setup

Power on receiver; follow on-screen setup wizard.

1. Select language: Choose preferred interface language.
2. Configure satellite settings: Select satellite positions and LNB type.
3. Scan for channels: Perform automatic channel search.
4. Set parental controls: Establish PIN if desired.
5. Adjust audio/video: Configure output settings for your TV.

CAUTION! Ensure proper ventilation; do not block cooling vents.

Specifications

• Receiver Type: Digital satellite receiver
• Tuning Range: 950-2150 MHz
• Signal Processing: Digital signal processor
• Channel Memory: 1000+ channels capacity
• Outputs: Composite video, stereo audio, RS-232
• Antenna Control: DiSEqC 1.2 compatible
• Power Supply: 110-240V AC, 50/60Hz
• Operating Temp: 0°C to 40°C
• Dimensions: Standard receiver size

Controls and Settings

Access menu system via MENU button. Front Panel: POWER, CHANNEL +/-, MENU, OK.

Remote: POWER, Numeric buttons, MENU, OK, EXIT, CHANNEL +/-, VOLUME +/-, FAVORITES, INFO.

Satellite Settings: LNB configuration, dish positioning, signal strength. Channel Management: Favorite lists, channel editing, parental locks. System: Language, factory reset, software updates. Audio/Video: Output resolution, audio mode, aspect ratio.

Connecting Devices

Satellite: LNB input. TV: Composite video and audio outputs. Computer: RS-232 for updates.

1. Turn off all devices before connecting.
2. Use quality coaxial cables for satellite connection.
3. Match audio/video cables to correct TV inputs.
4. For motorized dish, ensure proper motor wiring.

Tip: Use shielded cables to reduce interference.

Satellite Operation

Supports multiple satellite positions and channel reception.

1. Select satellite: Use satellite list in menu.
2. Position dish: Use antenna control for motorized systems.
3. Check signal: Monitor signal strength/quality meters.
4. Store position: Save satellite positions for quick access.
5. Scan channels: Perform transponder scans for new channels.
6. Adjust settings: Fine-tune LNB and dish settings as needed.

WARNING! Do not adjust dish during thunderstorms. Ensure secure mounting.

Channel Management

Organize and manage satellite channels effectively.

1. Edit channel list: Remove unwanted channels.
2. Create favorites: Organize channels into favorite groups.
3. Set parental locks: Restrict access to specific channels.
4. Update channel info: Manual editing of channel names.
5. Backup settings: Save channel list to external device.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; avoid liquids.

Regular maintenance: Check cable connections, ensure proper ventilation, update software when available.

CAUTION! Do not open casing; no user-serviceable parts inside.

Regulatory Information

FCC compliant: Class B digital device. CE marked for European compliance. Copyright © Kenwood Corporation. For technical support and updates, visit www.kenwood.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No signal	Dish alignment/cables	Check dish positioning; inspect cables and connections.
Remote not working	Batteries/obstacles	Replace batteries; ensure clear path to sensor.
No audio/video	Output connections	Verify TV input selection; check cable connections.
Channels missing	Signal/settings	Rescan channels; check signal strength.
Receiver locked	Parental control	Enter correct PIN; reset if necessary.

Reset: Menu > System > Factory Reset (use with caution).

Service: Contact authorized Kenwood service center for repairs.