Kenwood 6990 HD Manual

The Kenwood 6990 HD is a high-definition home theater receiver with Dolby Atmos support, 4K video pass-through, built-in Wi-Fi and Bluetooth connectivity, multi-room audio capabilities, and compatibility with various streaming services. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Network Setup 8. Audio Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.2 channel amplifier, Dolby Atmos and DTS:X support, 4K/60p pass-through, HDMI inputs/outputs, network connectivity, remote control.

Feature	Description
HDMI Inputs	6 HDMI inputs with 4K/60p support
Audio Formats	Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD Master Audio
Network Connectivity	Built-in Wi-Fi and Ethernet
Bluetooth	Wireless audio streaming
Multi-room Audio	Zone 2 and Zone 3 output capabilities
Streaming Services	Spotify Connect, Tidal, Deezer, etc.
Power Output	100W per channel (8 ohms, 20Hz-20kHz)
Phono Input	MM phono stage for turntables
USB Port	For firmware updates and media playback
Remote Control	Full-function remote with learning capability

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Match polarity (+/-) for all speaker connections.
Connect HDMI sources: Use HDMI inputs for 4K devices.
Connect TV: Use HDMI OUT (MONITOR) to TV.
Connect network: Use Ethernet cable or setup Wi-Fi.
Plug into AC power.

WARNING! Ensure proper ventilation; maintain at least 4 inches clearance around unit.

First-Time Setup

Power on receiver; follow on-screen setup wizard.

Speaker setup: Use automatic room calibration with included microphone.
Network setup: Connect to Wi-Fi or Ethernet network.
Input assignment: Configure HDMI inputs for connected devices.
Streaming services: Log into preferred streaming accounts.
Audio settings: Configure Dolby Atmos and surround sound options.

CAUTION! Do not block ventilation slots; ensure stable power supply.

Specifications

Amplifier Section: 7.2 channels, 100W per channel (8 ohms)
Audio Decoding: Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD Master Audio
Video Support: 4K/60p, HDR10, Dolby Vision, HLG
Connectivity: 6 HDMI inputs, 2 HDMI outputs, Ethernet, Wi-Fi, Bluetooth
Inputs/Outputs: Phono, optical/coaxial digital, analog audio, Zone 2/3 outputs
Streaming: Spotify Connect, Tidal, Deezer, internet radio
Power Consumption: 500W maximum
Dimensions: 17.1" W × 6.8" H × 15.4" D
Weight: 25.4 lbs

Controls and Settings

Access menu system via front panel or remote control. Front Panel: POWER, INPUT SELECT, VOLUME, SETUP.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, MENU, NAVIGATION buttons, SOUND MODE, ZONE control.

Audio Settings: Speaker configuration, crossover settings, room EQ, sound modes (Direct, Pure Direct, Stereo, etc.). Video Settings: HDMI setup, video mode, resolution. Network Settings: Wi-Fi setup, firmware updates, streaming services. System Settings: Language, OSD settings, ECO mode.

Connecting Devices

HDMI: Connect 4K sources to HDMI inputs. Analog: Use RCA inputs for legacy devices. Network: Ethernet or Wi-Fi.

Turn off all devices before connecting.
Use high-speed HDMI cables for 4K content.
Assign inputs in setup menu for easy selection.
Connect subwoofer to SUBWOOFER PRE-OUT.

Tip: Use HDMI-CEC for single remote control operation.

Network Setup

Supports wired and wireless network connections.

Wired: Connect Ethernet cable to router.
Wireless: Access network settings, select Wi-Fi network, enter password.
Streaming: Access music services via home menu.
Firmware updates: Check for updates in system menu.
Multi-room: Configure Zone 2 and Zone 3 outputs.

WARNING! Ensure stable network connection for streaming services.

Audio Features

Dolby Atmos: Enable for height channel effects. Sound Modes: Multiple presets for different content types. Room Calibration: Automatic speaker setup and EQ.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth; avoid chemicals. Keep away from moisture and extreme temperatures.

CAUTION! Do not use liquid cleaners; ensure proper ventilation during operation.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/volume	Check input selection; adjust volume; verify speaker connections.
No video	HDMI connection	Check HDMI cables; ensure correct input selected; try different HDMI port.
Network issues	Connection settings	Verify Wi-Fi password; check router settings; restart router and receiver.
Remote not working	Batteries/obstacles	Replace batteries; ensure clear line of sight to IR sensor.
Overheating	Ventilation	Ensure proper ventilation; reduce volume if operating at high levels.

Reset: Press and hold INFO and STATUS buttons for 5 seconds.

Service: 1-800-536-9663; www.kenwood.com