kenwood bt200 manual

The Kenwood BT200 is a professional-grade Bluetooth car stereo receiver with advanced connectivity features, built-in amplifier, USB input, AUX input, Bluetooth streaming, hands-free calling, and customizable audio settings. Designed for in-vehicle use with 12V DC power supply, digital signal processing, and multi-band equalizer. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Digital display, control buttons, USB port, AUX input, Bluetooth connectivity, remote control, wiring harness.

Feature	Description
Bluetooth connectivity	For wireless audio streaming and hands-free calling
USB port	For connecting USB devices and charging
AUX input	3.5mm audio input for external devices
Built-in amplifier	4 x 50W maximum power output
Power supply	12V DC vehicle electrical system
Display	Digital LCD with backlight
EQ controls	Multi-band equalizer with preset options
SOURCE	Cycles through input sources
VOLUME	Adjusts audio output level
POWER	Turns unit on/off

Installation

Unpack and inspect contents. Prepare vehicle for installation.

1. Disconnect vehicle battery: Remove negative terminal for safety.
2. Remove existing stereo: Use removal tools to extract old unit.
3. Connect wiring harness: Match color-coded wires (red - ignition, yellow - battery, black - ground).
4. Connect antenna and speakers: Ensure proper connections.
5. Test unit: Reconnect battery and verify operation before final installation.

WARNING! Always disconnect vehicle battery before installation to prevent electrical shorts.

First-Time Setup

Power on unit; follow initial setup procedure.

1. Pair Bluetooth: Press SOURCE to Bluetooth mode, search for "KENWOOD BT200" on your device.
2. Set audio preferences: Use EQ settings to adjust bass, treble, and balance.
3. Configure display: Adjust brightness and color settings in menu.
4. Set clock: Access time settings in system menu.

CAUTION! Ensure proper wiring connections to avoid electrical issues.

Specifications

• Power Output: 4 x 50W max (4 x 22W RMS)
• Power Supply: 12V DC negative ground
• Bluetooth: Version 4.1, A2DP, AVRCP, HFP
• USB: 5V/1A charging, supports MP3/WMA playback
• Frequency Response: 20Hz - 20kHz
• Signal-to-Noise: >80dB
• Dimensions: DIN standard (178mm x 50mm)
• Operating Temp: -20°C to +60°C

Controls and Settings

Access menu system via FUNCTION button. Front Panel: POWER, VOLUME, SOURCE, EQ, FUNCTION.

Remote: POWER, Numeric buttons, SOURCE, VOLUME, MUTE, BAND, FUNCTION, MENU.

Audio: BASS, TREBLE, BALANCE, FADER, LOUDNESS. Bluetooth: Pairing, call management, phonebook access. System: Display settings, clock, reset options. Source selection: Radio, Bluetooth, USB, AUX.

Connecting Devices

Bluetooth: Wireless pairing. USB: Direct connection for audio and charging. AUX: 3.5mm cable connection.

1. Turn off vehicle before connecting wired devices.
2. For Bluetooth: Enable pairing mode, search on mobile device.
3. For USB: Insert compatible storage device or charging cable.
4. Select input via SOURCE button (BT, USB, AUX, RADIO).

Tip: Ensure Bluetooth device is within 10 meters for stable connection.

Bluetooth Operation

Supports audio streaming and hands-free calling.

1. Pair device: Enter Bluetooth mode, select "KENWOOD BT200" on your phone.
2. Stream audio: Play music from connected device automatically.
3. Answer calls: Press phone button on unit or remote.
4. Reject calls: Hold phone button for 2 seconds.
5. Voice dial: Press and hold phone button for voice commands.
6. Phonebook access: Sync contacts through Bluetooth settings.
7. Disconnect: Turn off Bluetooth on device or reset pairing.

WARNING! Do not operate Bluetooth functions while driving in hazardous conditions.

Audio Settings

Equalizer: PRESET (POP, ROCK, JAZZ, CLASSIC), USER customizable. Sound: LOUDNESS on/off, FADER control, BALANCE adjustment.

Care & Maintenance

Use soft, dry cloth for cleaning. Avoid chemical cleaners. Keep unit dry and free from moisture.

CAUTION! Do not use abrasive materials; disconnect power before cleaning.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE certified for European markets. Bluetooth SIG qualified. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check battery and ignition connections; verify fuse condition.
Bluetooth not connecting	Pairing mode/distance	Enter pairing mode; ensure device within range; delete old pairing.
No sound from speakers	Speaker wiring	Check speaker connections; verify speaker impedance (4-8 ohms).
USB not recognized	Format/compatibility	Use FAT32 format; check file compatibility (MP3/WMA).
Poor Bluetooth audio	Interference/distance	Reduce distance; minimize wireless interference sources.

Reset: Hold FUNCTION + POWER for 5 seconds to factory reset.

Service: Contact authorized Kenwood service center; www.kenwood.com