Kenwood BT300 Manual

The Kenwood BT300 is a professional-grade Bluetooth headset designed for clear communication in noisy environments. Featuring advanced noise cancellation technology, long battery life, comfortable over-ear design, multipoint connectivity, and intuitive controls. Below are key sections for safety, features, setup, operation, and troubleshooting.

Features at a Glance

Key components: Advanced noise cancellation, Bluetooth 5.0, Multipoint connectivity, Voice assistant support, On-ear controls, Charging case.

Package Contents

Unpack and verify all components are present.

1. Kenwood BT300 Headset
2. USB-C Charging Cable
3. Charging Case
4. 3.5mm Audio Cable (optional wired connection)
5. User Manual
6. Warranty Card

WARNING! Keep small parts away from children. Check for any shipping damage.

Initial Setup

Charge headset before first use; follow pairing instructions.

1. Charge headset: Connect USB-C cable to charging case, plug into power source.
2. Power on: Press and hold power button for 3 seconds until LED indicator lights.
3. Pair with device: Enable Bluetooth on your device, select "Kenwood BT300" from available devices.
4. Confirm connection: Audio prompt confirms successful pairing.

CAUTION! Ensure headset is fully charged before extended use.

Specifications

• Bluetooth Version: 5.0 with A2DP, AVRCP, HFP, HSP
• Battery: Lithium-ion 800mAh
• Talk Time: Up to 20 hours
• Music Time: Up to 15 hours
• Standby Time: Up to 300 hours
• Charging Time: 2 hours (full charge)
• Wireless Range: Up to 10 meters (33 feet)
• Frequency Response: 20Hz - 20kHz
• Weight: 280 grams
• Operating Temp: 0°C to 45°C

Controls and Functions

Access all functions via physical buttons and voice commands.

Button Controls: Power, Volume Up/Down, Play/Pause, Voice Assistant, Noise Cancellation Toggle.

Audio: Adjust volume, skip tracks, answer/end calls. Connectivity: Pair new devices, switch between connected devices. Voice: Activate voice assistant, voice dialing. Settings: Toggle noise cancellation, check battery status via LED indicators.

Pairing Devices

Connect to smartphones, tablets, computers, and other Bluetooth devices.

1. Ensure headset is in pairing mode (flashing blue LED).
2. Enable Bluetooth on your source device.
3. Select "Kenwood BT300" from available devices list.
4. Confirm pairing code if prompted (0000 default).

Tip: For multipoint connection, pair with first device, then repeat process for second device.

Advanced Features

Supports advanced audio and connectivity features.

1. Noise Cancellation: Toggle with dedicated button for quiet environments.
2. Voice Assistant: Press and hold assistant button to activate Siri/Google Assistant.
3. Multipoint: Automatically switches between two connected devices.
4. Audio Sharing: Share audio with another BT300 headset.
5. Firmware Updates: Update via Kenwood mobile app.

WARNING! Do not use while driving or in situations requiring full attention.

Maintenance

Clean regularly with dry cloth; store in charging case when not in use.

CAUTION! Do not use liquids or abrasive cleaners; avoid extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE certified for European market. Copyright © 2024 Kenwood Corporation; all trademarks property of Kenwood. For support, visit www.kenwood.com or contact 1-800-KENWOOD.

Troubleshooting

Reset: Press and hold power + volume down for 10 seconds to factory reset.

Service: 1-800-KENWOOD; www.kenwood.com/support