Kenwood CD 204 Manual

The Kenwood CD 204 is a high-quality CD player featuring advanced audio technology, digital signal processing, multiple playback modes, remote control operation, and compatibility with various CD formats. Designed for optimal sound quality and user convenience, it includes features like random play, program memory, repeat functions, and digital output. Below are key sections covering features, installation, operation, specifications, and troubleshooting.

Features at a Glance

Key components: CD transport mechanism, digital audio processor, remote control, front panel controls, audio outputs, and power supply.

Feature	Description
CD Loading	Motorized disc tray with smooth operation
Playback Modes	Normal, Random, Program, Repeat
Audio Outputs	Analog RCA, Digital optical/coaxial
Remote Control	Full function remote included
Display	LCD with track/time information
Power Supply	AC 120V, 60Hz
OPEN/CLOSE	Ejects and closes disc tray
PLAY/PAUSE	Starts and pauses playback
STOP	Stops current playback
POWER	Turns unit on/off

Installation

Unpack and inspect all components. Place on stable, level surface.

1. Connect audio outputs: Use RCA cables to connect to amplifier or receiver.
2. Connect digital output: Use optical or coaxial cable for digital connection.
3. Power connection: Plug into AC power outlet.
4. Remote setup: Install batteries in remote control.

WARNING! Ensure proper ventilation around unit. Avoid placing near heat sources.

First-Time Setup

Power on unit; initialize system settings.

1. Load disc: Press OPEN/CLOSE, place CD in tray, close tray.
2. Basic playback: Press PLAY to begin playback.
3. Volume adjustment: Use amplifier volume control.
4. Display settings: Adjust brightness if available.

CAUTION! Handle discs by edges only. Keep unit free from dust and moisture.

Specifications

• Supported Formats: Audio CD, CD-R, CD-RW
• Frequency Response: 20Hz - 20kHz
• Signal-to-Noise Ratio: >100dB
• Total Harmonic Distortion: <0.005%
• Output Level: 2V RMS
• Digital Output: Optical and coaxial
• Power Consumption: 15W
• Dimensions: 430mm x 295mm x 95mm
• Weight: 3.5kg

Controls and Settings

Front panel: POWER, OPEN/CLOSE, PLAY/PAUSE, STOP, DISPLAY.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, REPEAT, RANDOM, PROGRAM.

Playback Modes: NORMAL (sequential play), RANDOM (shuffle), PROGRAM (custom sequence), REPEAT (track/disc). Display: Track number, elapsed time, remaining time, program information.

Connecting to Audio Systems

Analog: RCA outputs to amplifier. Digital: Optical/coaxial to compatible receiver.

1. Turn off all equipment before connecting.
2. Use quality audio cables for best performance.
3. Match output to input types (analog to analog, digital to digital).
4. Secure all connections firmly.

Tip: Use shortest possible cable lengths to minimize signal loss.

Playing CDs

Supports standard audio CDs and recordable media.

1. Insert disc: Press OPEN/CLOSE, place CD label side up.
2. Play: Press PLAY; unit reads TOC and begins playback.
3. Skip tracks: Use SKIP buttons for forward/backward.
4. Pause: Press PAUSE to temporarily halt playback.
5. Stop: Press STOP to end playback.
6. Eject: Press OPEN/CLOSE to remove disc.

WARNING! Do not move unit during playback. Keep discs clean and scratch-free.

Advanced Functions

Program Play: Store up to 20 tracks in desired order. Random Play: Shuffle all tracks. Repeat: Single track or entire disc. Time Search: Jump to specific time in track.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Clean lens only with approved CD lens cleaner.

CAUTION! Never use solvents or abrasive cleaners. Avoid extreme temperatures and humidity.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European standards. Copyright © Kenwood Corporation. All trademarks property of their respective owners. For technical support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord disconnected	Check power connection; ensure outlet working
Disc won't play	Disc dirty/damaged	Clean disc; check for scratches; try different CD
No sound	Audio connections	Check cables; verify amplifier on and selected input
Remote not working	Batteries/obstruction	Replace batteries; ensure line of sight to sensor
Skip or hesitation	Disc quality/vibration	Use quality discs; ensure stable surface

Reset: Unplug unit for 30 seconds, then reconnect.

Service: 1-800-536-9663; www.kenwood.com