Kenwood CD Changer Manual

The Kenwood CD Changer is a multi-disc audio system featuring magazine-style loading, random/shuffle playback modes, track programming, digital audio output, remote control compatibility, anti-shock memory, and compatibility with CD-R/RW formats. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Audio System 7. Playing CDs 8. Programming Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Multi-disc magazine, Main Unit, Remote Control, Audio Output connectors, Digital Output, Power connector.

Feature	Description
Disc Magazine	Holds up to 6 CDs for continuous playback
Random Play	Plays tracks in random order
Shuffle Play	Randomizes playback across all loaded discs
Program Memory	Stores up to 32 tracks in custom sequence
Anti-Shock Memory	10-second buffer for skip-free playback
Digital Output	Optical/coaxial digital audio connection
Audio Outputs	RCA left/right analog audio
OPEN/CLOSE	Ejects disc magazine
DISC SKIP	Advances to next disc in magazine
REPEAT	Single track/all tracks repeat modes

Installation

Unpack and inspect contents. Place on stable surface near audio system.

Connect to audio system: Use RCA audio cables to connect to amplifier/receiver inputs.
Connect digital output: Use optical or coaxial cable for digital connection (optional).
Connect power adapter: Plug into AC power outlet.
Load disc magazine: Insert magazine with CDs properly seated.

WARNING! Handle disc magazine with care; avoid touching CD surfaces. Ensure proper ventilation around unit.

First-Time Setup

Power on CD changer; follow initialization procedure.

Load disc magazine: Press EJECT, insert magazine with CDs label-side up.
Initialize system: Unit will automatically read disc table of contents.
Select audio output: Choose analog or digital output in setup menu.
Set playback preferences: Configure repeat, random, and display settings.

CAUTION! Do not force magazine into unit. Ensure CDs are clean and free of scratches.

Specifications

Disc Capacity: 6-disc magazine
Supported Formats: CD-DA, CD-R, CD-RW
Frequency Response: 20Hz-20kHz
Signal-to-Noise Ratio: >100dB
Dynamic Range: >95dB
Outputs: Analog RCA, Digital optical/coaxial
Power Requirements: 120V AC, 60Hz
Dimensions: Standard component size
Remote Control: Infrared, requires 2 AAA batteries

Controls and Settings

Front Panel: POWER, EJECT, DISC SKIP, PLAY/PAUSE, STOP, DISPLAY.

Remote: POWER, Numeric buttons, EJECT, DISC 1-6, PLAY, PAUSE, STOP, SKIP, REPEAT, RANDOM, PROGRAM.

Playback Modes: REPEAT (OFF/ONE/ALL), RANDOM (OFF/DISC/ALL), PROGRAM (memory programming). Display: Track/time/disc information. Setup: Digital output selection, display brightness, auto-play settings.

Connecting to Audio System

Audio Outputs: RCA left/right analog. Digital Output: Optical/coaxial.

Turn off all components before connecting.
Connect RCA cables to amplifier CD input.
For digital connection: Use optical or coaxial cable to digital input.
Connect power adapter to wall outlet.
Turn on components and select correct input on amplifier.

Tip: Use high-quality cables for best audio performance.

Playing CDs

Supports CD-DA, CD-R, CD-RW formats.

Load magazine: Press EJECT, insert loaded magazine.
Select disc: Press DISC 1-6 or use DISC SKIP.
Play: Press PLAY; use SKIP for track navigation.
Pause: Press PAUSE to temporarily stop playback.
Stop: Press STOP; unit remembers stop position.
Repeat: Press REPEAT for track/all repeat modes.
Random: Press RANDOM for disc/all random playback.
Eject: Press EJECT to remove magazine.

WARNING! Do not remove magazine during playback. Allow unit to complete operation before ejecting.

Programming Features

Program Memory: Store custom play sequences.

Enter program mode: Press PROGRAM.
Select tracks: Use numeric buttons to enter track numbers.
Select discs: Press DISC then track number for multi-disc programming.
Store program: Press PROGRAM again to save (up to 32 tracks).
Play program: Press PLAY to start programmed sequence.
Clear program: Hold PROGRAM for 3 seconds to erase memory.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Clean CD lenses with approved cleaning disc only.

CAUTION! Do not use chemical cleaners. Keep unit away from moisture and extreme temperatures. Handle CDs by edges only.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power connection	Check power adapter connection; ensure outlet is working
No sound	Audio connections	Verify amplifier input selection; check audio cable connections
Disc not recognized	Disc damage/format	Clean disc; ensure compatible format (CD-R/RW)
Remote not working	Batteries/obstruction	Replace batteries; ensure clear line of sight to sensor
Skip or hesitation	Disc scratches	Clean disc; check for excessive vibration
Magazine won't eject	Power issue	Ensure unit is powered; wait for operation to complete

Reset: Unplug unit for 30 seconds, then reconnect.

Service: Contact authorized Kenwood service center; www.kenwood.com