Kenwood CD Player Manual

The Kenwood CD Player is a high-quality audio component featuring advanced digital signal processing, multiple playback modes, remote control operation, programmable memory, shuffle/repeat functions, digital output, and compatibility with various CD formats. Designed for optimal audio performance with anti-shock mechanism, bass/treble controls, and LCD display. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Audio System 7. Playing CDs 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: CD transport mechanism, Remote Control, LCD display, Audio outputs, Digital output, Headphone jack, Program memory.

Feature	Description
CD loading mechanism	Motorized tray for smooth disc loading
LCD display	Shows track info, time, and playback status
Audio outputs (L/R)	RCA connectors for amplifier connection
Digital output	Coaxial or optical for digital audio connection
Headphone jack	3.5mm stereo output for private listening
AC power input	For main power connection
OPEN/CLOSE	Ejects and closes CD tray
PLAY/PAUSE	Starts and pauses playback
STOP	Stops current playback
POWER	Turns CD player on/off

Installation

Unpack and inspect contents. Place on stable, level surface.

Connect to amplifier: Use RCA audio cables to connect L/R outputs to amplifier inputs.
Connect digital output: Use coaxial or optical cable for digital connection if required.
Connect headphones: Plug into 3.5mm headphone jack for private listening.
Plug into AC power outlet.

WARNING! Ensure proper ventilation; do not block ventilation openings. Keep away from heat sources.

First-Time Setup

Power on CD player; initialize system.

Load CD: Press OPEN/CLOSE, place CD properly on tray, close tray.
Basic playback: Press PLAY to begin playback; use volume control on amplifier.
Display settings: Adjust display brightness and contrast if available.
Audio settings: Configure bass, treble, and sound modes as desired.

CAUTION! Handle CDs by edges only; avoid touching playing surface.

Specifications

Supported Formats: CD-DA, CD-R, CD-RW
Frequency Response: 20Hz - 20kHz
Signal-to-Noise Ratio: >90dB
Total Harmonic Distortion: <0.05%
Outputs: Analog (L/R), Digital (coaxial/optical), Headphone
Playback Modes: Normal, Shuffle, Repeat, Program
Display: LCD with track/time information
Power Requirements: 120V AC, 60Hz
Dimensions: Standard component size (17" width)

Controls and Settings

Front Panel: POWER, OPEN/CLOSE, PLAY/PAUSE, STOP, SKIP buttons, Display.

Remote Control: POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, REPEAT, SHUFFLE, PROGRAM, DISPLAY.

Audio Settings: Bass, Treble, Balance, Loudness. Playback: Repeat (Track/Disc/All), Shuffle, Program memory (up to 20 tracks). Display: Track number, elapsed time, remaining time, program information.

Connecting to Audio System

Audio Outputs: RCA L/R for analog connection. Digital Output: Coaxial or optical for digital connection.

Turn off all components before connecting.
Connect audio cables: Red to right channel, white to left channel.
Connect digital cable if using external DAC.
Connect to amplifier's CD or AUX input.

Tip: Use high-quality cables for best audio performance.

Playing CDs

Supports standard audio CDs, CD-R, and CD-RW discs.

Load disc: Press OPEN/CLOSE, place CD label-side up, close tray.
Play: Press PLAY; player reads TOC and begins playback.
Skip tracks: Use PREV/NEXT buttons to skip between tracks.
Pause: Press PAUSE to temporarily stop playback.
Stop: Press STOP to end playback; display shows standby.
Eject: Press OPEN/CLOSE to remove disc.
Search: Press and hold SKIP buttons for fast forward/rewind.
Repeat: Press REPEAT for track/disc repeat modes.

WARNING! Do not move player during playback; avoid vibration.

Advanced Features

Program Play: Select specific tracks in desired order. Shuffle Play: Random track selection. Repeat Modes: Track, Disc, or All discs. Last Position Memory: Resumes playback from stop point.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior; CD lens cleaner periodically.

CAUTION! Do not use chemicals or abrasive cleaners. Keep discs clean and free of scratches.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Copyright protection: Incorporates SCMS copy protection. Manufactured under license from Dolby Laboratories. For support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; ensure outlet is working.
No sound	Connections/volume	Check audio cables; ensure amplifier is on and volume up.
Disc won't play	Disc/loading	Ensure disc is clean and properly loaded; check format compatibility.
Skip or hesitation	Disc damage/vibration	Clean disc; ensure stable surface free from vibration.
Remote not working	Batteries/obstruction	Replace batteries; ensure clear line of sight to sensor.

Reset: Unplug power for 30 seconds, then reconnect.

Service: 1-800-536-9663; www.kenwood.com