kenwood dash cam dvr 410 manual

The Kenwood DVR-410 is a high-quality dash camera featuring Full HD 1080p recording, wide-angle lens, G-sensor for impact detection, loop recording, night vision capability, motion detection, built-in GPS, Wi-Fi connectivity, mobile app control, and parking mode. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Recording and Playback 8. Mobile App Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dash camera unit, windshield mount, power adapter, USB cable, user manual.

Feature	Description
Recording Resolution	Full HD 1080p at 30fps
Lens	Wide-angle 140-degree lens
G-Sensor	Automatic impact detection and file protection
Loop Recording	Continuous recording with automatic overwrite
Night Vision	WDR technology for low-light recording
Motion Detection	Starts recording when motion is detected
GPS	Built-in GPS for location and speed data
Wi-Fi	Wireless connectivity for mobile app
Parking Mode	24-hour surveillance when vehicle is parked
Memory	MicroSD card support up to 128GB

Installation

Unpack and inspect contents. Install on windshield.

Clean windshield area: Use alcohol wipe to clean mounting surface.
Attach mount: Remove adhesive backing and press firmly onto windshield.
Mount camera: Slide camera onto mount until it clicks into place.
Connect power: Route power cable to vehicle's 12V outlet or hardwire kit.
Adjust angle: Position camera for optimal forward view.

WARNING! Do not obstruct driver's view. Ensure mount is secure before driving.

First-Time Setup

Power on dash cam; follow initial setup prompts.

Insert memory card: Format card when prompted (required for first use).
Set date and time: Use menu to configure current date and time.
Configure recording settings: Select resolution, loop recording interval.
Enable features: Activate G-sensor, motion detection, GPS as needed.
Connect to mobile app: Download Kenwood app and connect via Wi-Fi.

CAUTION! Do not operate while driving. Park vehicle during setup.

Specifications

Sensor: 2.0MP CMOS sensor
Resolution: 1920x1080 Full HD
Lens Angle: 140 degrees wide angle
Display: 2.4-inch LCD screen
Storage: MicroSD card up to 128GB (Class 10 recommended)
GPS: Built-in GPS with speed and location logging
Wi-Fi: 2.4GHz for mobile app connectivity
Power: 12V vehicle adapter or hardwiring kit
Operating Temp: -20°C to 70°C (-4°F to 158°F)
Video Format: MP4 (H.264 compression)

Controls and Settings

Access menu via MENU button. Front buttons: POWER, REC, MENU, UP/DOWN, OK.

Menu Settings: Resolution, Loop Recording, G-Sensor Sensitivity, Motion Detection, Time/Date, Format, Default Reset, Language, Beep Sound, Parking Mode, Wi-Fi Settings.

Recording modes: Normal, Event (G-sensor), Parking, Motion Detection. G-sensor sensitivity: Low, Medium, High. Loop recording: 1, 3, 5, 10 minute intervals.

Connecting Devices

Power: 12V vehicle adapter. Mobile: Wi-Fi connection to Kenwood app. Computer: USB connection for file transfer.

Ensure camera is powered off before connecting cables.
Use provided USB cable for computer connection.
For mobile app: Enable Wi-Fi on camera, connect smartphone to camera's network.

Tip: Use Class 10 or higher MicroSD card for optimal performance.

Recording and Playback

Automatic recording when powered on. Manual recording with REC button.

Normal recording: Starts automatically when camera powers on.
Event recording: G-sensor automatically protects files during impacts.
Manual recording: Press REC button to manually start/stop recording.
Playback: Use menu to access recorded files on SD card.
File protection: Lock important files to prevent overwriting.
Format card: Regular formatting recommended for optimal performance.

WARNING! Protected files will not be overwritten. Manage storage regularly.

Mobile App Features

Kenwood Dash Cam App: Live view, playback, settings, file download.

Download app: Available on iOS and Android app stores.
Connect: Enable camera Wi-Fi, connect smartphone to camera network.
Live view: Watch real-time footage from your phone.
Playback: Browse and play recorded videos on mobile device.
Settings: Adjust camera settings remotely via app.
File management: Download important videos to phone.

Care & Maintenance

Regular cleaning of lens and windshield. Check mount security periodically.

CAUTION! Use only soft, dry cloth for cleaning lens. Do not use chemicals or abrasive materials.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE certified for European market. Copyright © 2025 Kenwood Corporation. For support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Camera not powering on	Power connection	Check fuse in power adapter; ensure proper connection to 12V outlet.
No recording	Memory card issues	Format memory card; ensure card is properly inserted; use Class 10 card.
Poor video quality	Lens/settings	Clean lens; adjust resolution settings; check for condensation.
Wi-Fi not connecting	Network issues	Ensure Wi-Fi is enabled on camera; restart camera and mobile device.
GPS not working	Signal reception	Ensure clear view of sky; drive to open area for initial GPS lock.
Overheating	High temperature	Park in shade; ensure proper ventilation; avoid direct sunlight.

Reset: Menu > System > Factory Reset if available.

Service: 1-800-536-9663; www.kenwood.com