Kenwood DDX6019 Installation Manual

The Kenwood DDX6019 is a 6.95-inch wide TFT active matrix LCD monitor with built-in DVD receiver, featuring motorized front panel, detachable face security, AM/FM tuner, CD/DVD playback, MP3/WMA compatibility, auxiliary input, video input, and steering wheel remote control compatibility. Below are key sections for installation, wiring, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation Preparation 3. Wiring Connections 4. Specifications 5. Controls and Functions 6. Mounting Procedure 7. System Setup 8. Audio/Video Connections 9. Safety Precautions 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 6.95-inch TFT LCD display, motorized front panel, DVD receiver, remote control, wiring harness, mounting sleeve.

Feature	Description
Display Size	6.95-inch wide TFT active matrix LCD
Motorized Front Panel	Automatically opens and closes for disc insertion
DVD Playback	Supports DVD-Video, DVD-R/RW, DVD+R/RW
Audio Formats	CD, MP3, WMA playback capability
Tuner	AM/FM with 18FM/6AM presets
Video Input	RCA composite video input
Auxiliary Input	3.5mm mini jack for external audio sources
Steering Wheel Control	Compatible with most steering wheel remote systems
Security	Detachable faceplate with carrying case
Power Output	50W x 4 channels (max)

Installation Preparation

Unpack and verify all components before beginning installation.

Check package contents: Head unit, wiring harness, mounting sleeve, remote control, owner's manual.
Disconnect negative battery terminal for safety.
Remove existing stereo unit if applicable.
Test fit mounting sleeve in dashboard opening.
Prepare wiring harness connections.

WARNING! Always disconnect vehicle battery before beginning installation to prevent electrical shorts or damage.

Wiring Connections

Connect wiring harness following color-coded system.

Yellow wire: Connect to constant 12V power source (battery).
Red wire: Connect to ignition-switched 12V power source.
Black wire: Connect to vehicle chassis ground.
Orange/White wire: Connect to illumination circuit if available.
Blue/White wire: Connect to amplifier remote turn-on if using external amp.
Speaker wires: Connect following color coding (Gray, Gray/Black, White, White/Black, etc.).
Antenna connector: Plug in vehicle antenna cable.

CAUTION! Ensure all connections are secure and properly insulated to prevent shorts.

Specifications

Display: 6.95-inch wide TFT active matrix LCD
Resolution: 1440 x 234 pixels
Power Output: 50W x 4 channels (max power)
Tuner Sensitivity: FM 10.3 dBf, AM 15 μV
Video Input: 1.0Vp-p/75 ohms
Operating Voltage: 14.4V DC (11-16V allowable)
Dimensions: 178mm(W) x 100mm(H) x 175mm(D)
Weight: 1.5 kg
Temperature Range: -20°C to +60°C

Controls and Functions

Front panel controls: POWER, VOLUME knob, SOURCE, FUNCTION, OPEN/CLOSE.

Remote Control: POWER, Numeric buttons, OPEN/CLOSE, SOURCE, VOLUME, MUTE, MENU, SETUP, Navigation arrows.

Display Settings: Brightness, contrast, color adjustment, screen angle. Audio: Bass, treble, balance, fader, loudness. Source Selection: DVD, CD, Tuner, Auxiliary. Setup: Clock setting, display language, security code.

Mounting Procedure

Secure head unit using provided mounting sleeve and brackets.

Insert mounting sleeve into dashboard opening.
Bend retention tabs outward to secure sleeve in dashboard.
Connect wiring harness to vehicle harness.
Connect antenna cable and any additional cables.
Slide head unit into mounting sleeve until it clicks into place.
Reconnect vehicle battery and test operation.

Tip: Ensure mounting sleeve is securely fastened before inserting head unit.

System Setup

Initial configuration after installation.

Set clock: Press SETUP, navigate to clock settings.
Program radio presets: Tune to desired stations, press and hold preset buttons.
Adjust audio settings: Set bass, treble, balance, fader to preference.
Set display angle: Adjust for optimal viewing from driver's position.
Set security code: Recommended for theft protection.
Test all functions: DVD playback, radio, auxiliary input.

WARNING! Do not operate DVD functions while vehicle is in motion for safety.

Audio/Video Connections

Additional connectivity options for expanded system.

Auxiliary Input: Connect portable audio players via 3.5mm jack.
Video Input: Connect external video sources (game consoles, cameras) via RCA composite.
Steering Wheel Control: Connect compatible interface module.
Amplifier Connection: Use blue/white wire for remote turn-on signal.
Subwoofer: Connect via preamp outputs if adding external amplifier.

CAUTION! Ensure all additional connections are made with vehicle power off.

Safety Precautions

Important safety information for proper operation.

Do not operate DVD functions while driving
Keep volume at reasonable levels for safe driving
Ensure display does not obstruct driver's view
Secure all wiring away from moving parts
Do not disassemble unit - no user-serviceable parts inside

WARNING! Installation should be performed by qualified personnel only.

Regulatory Information

FCC Part 15: Class B digital device compliant. This device complies with Part 15 of FCC Rules. Copyright © Kenwood Corporation. For technical support, contact Kenwood customer service at 1-800-536-9663 or visit www.kenwood.com. This product incorporates copyright protection technology.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring connections	Check battery and ignition connections; verify ground connection.
No sound	Speaker wiring/mute	Check speaker connections; ensure mute is off; verify source selection.
Display not working	Power/connections	Check power connections; verify illumination wire if dim.
DVD not playing	Disc/loading	Ensure disc is clean and properly inserted; check region compatibility.
Radio poor reception	Antenna connection	Verify antenna cable is securely connected; check antenna condition.

Reset: Disconnect battery for 30 seconds to reset unit if needed.

Service: 1-800-536-9663; www.kenwood.com