Kenwood DNX5140 Owners Manual

The Kenwood DNX5140 is a premium in-dash navigation receiver featuring a 6.1-inch touchscreen display, built-in GPS navigation, DVD/CD playback, USB connectivity, Bluetooth hands-free calling and audio streaming, HD Radio capability, iPod/iPhone direct control, and advanced audio processing. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Navigation Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 6.1-inch WVGA touchscreen display, GPS navigation system, DVD/CD player, USB port, Bluetooth module, HD Radio tuner, remote control.

FeatureDescription
Display6.1-inch WVGA touchscreen (800 x 480 pixels)
NavigationBuilt-in GPS with preloaded maps
Media PlaybackDVD, CD, MP3, WMA, AAC playback
ConnectivityUSB, Bluetooth, iPod/iPhone direct connection
AudioHD Radio, 13-band EQ, time alignment
Power Output50W x 4 channels (MOSFET power IC)
Video OutputRCA composite video output
Steering Wheel ControlCompatible with most steering wheel interfaces
Voice GuidanceTurn-by-turn navigation instructions
Parking GuideVisual parking assistance lines

Installation

Professional installation recommended. Ensure vehicle is parked safely with parking brake engaged.

  1. Disconnect negative battery terminal before beginning installation.
  2. Remove factory radio using appropriate removal tools.
  3. Connect wiring harness adapter to vehicle's wiring.
  4. Connect GPS antenna and place in optimal location.
  5. Secure unit in dashboard and reassemble trim pieces.
  6. Reconnect battery and test all functions.

WARNING! Installation requires technical expertise. Incorrect installation may damage vehicle electronics. Always disconnect battery before beginning work.

First-Time Setup

Power on unit; follow initial setup wizard.

  1. Language selection: Choose preferred language for interface.
  2. Time/Date setup: Set current time and date for navigation accuracy.
  3. GPS initialization: Allow unit to acquire satellite signals (may take several minutes).
  4. Bluetooth pairing: Pair mobile phone for hands-free operation.
  5. Audio settings: Configure sound preferences and equalizer.

CAUTION! Do not operate navigation system while driving. Always pull over safely to adjust settings.

Specifications

Controls and Settings

Primary control via touchscreen interface. Physical buttons: POWER/VOLUME, SRC (source), MAP, MENU.

Remote Control: POWER, Navigation buttons, Volume, Mute, Source selection, Menu access.

Audio Settings: 13-band equalizer, loudness, fader/balance, time alignment, crossover settings. Navigation Settings: Route preferences, avoidances, voice guidance volume. System Settings: Display brightness, button illumination, language, clock format. Bluetooth Settings: Pairing, phonebook access, call history.

Connecting Devices

USB: Connect USB devices for media playback. iPod/iPhone: Use dedicated cable for direct control. Bluetooth: Pair mobile devices for hands-free and audio streaming.

  1. Ensure vehicle is in park with parking brake engaged.
  2. Access source menu and select desired input.
  3. Follow on-screen prompts for device connection.
  4. For Bluetooth: Enable pairing mode on mobile device and select from available devices list.

Tip: Use genuine Kenwood cables for optimal compatibility and performance.

Playing Media

Supports DVD-Video, audio CDs, MP3/WMA CDs, USB media, Bluetooth audio.

  1. Insert media: Load DVD/CD into slot or connect USB device.
  2. Playback: Touch screen controls for play/pause, skip, repeat.
  3. Navigation: Use folder/track navigation for organized media.
  4. Video playback: Available when parking brake is engaged.
  5. Bluetooth audio: Stream from paired mobile devices.
  6. iPod control: Full navigation and playback control of connected iPod/iPhone.

WARNING! Do not watch video content while driving. Video playback is disabled when vehicle is in motion for safety.

Navigation Features

Built-in GPS navigation with detailed maps and points of interest.

  1. Destination entry: Address, intersection, points of interest, recent destinations.
  2. Route calculation: Fastest route, shortest distance, avoid highways/tolls.
  3. Voice guidance: Turn-by-turn instructions with street names.
  4. Map display: 2D/3D views, day/night modes.
  5. Points of interest: Gas stations, restaurants, hotels, etc.
  6. Route preview: Review calculated route before beginning navigation.

Care & Cleaning

Turn off unit before cleaning. Use soft, dry cloth for screen cleaning. For stubborn smudges, lightly dampen cloth with water.

CAUTION! Do not use chemical cleaners, alcohol, or abrasive materials on touchscreen. Avoid excessive pressure when cleaning.

Regulatory Information

FCC Part 15: Class B digital device compliant. This device complies with part 15 of the FCC Rules. Bluetooth is a registered trademark of Bluetooth SIG, Inc. iPod and iPhone are trademarks of Apple Inc. HD Radio is a trademark of iBiquity Digital Corporation. For technical support, contact Kenwood customer service at 1-800-536-9663 or visit www.kenwood.com.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerWiring/connectionsCheck fuse, wiring connections, battery connection
No GPS signalAntenna placementReposition GPS antenna, ensure clear view of sky
Bluetooth not connectingPairing issuesDelete old pairing, restart both devices, re-pair
Disc not readingDisc/media issueClean disc, check for scratches, try different media
Touchscreen unresponsiveCalibration/screen protectorRecalibrate touchscreen, remove screen protector
No soundAudio settings/connectionsCheck volume, mute, audio settings, speaker connections

Reset: Press reset button with pointed object or disconnect battery for 30 seconds.

Service: 1-800-536-9663; www.kenwood.com

Kenwood DNX5140 Owners Manual © - All Rights Reserved 2025