Kenwood DNX573S Installation Manual

The Kenwood DNX573S is a premium navigation receiver with 6.95-inch WVGA touchscreen display, built-in Garmin navigation, Apple CarPlay and Android Auto compatibility, Bluetooth connectivity, HD Radio, SiriusXM Ready, dual USB ports, rear camera input, and advanced audio controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation Preparation 3. Wiring Connections 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Navigation Setup 8. Smartphone Integration 9. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 6.95-inch WVGA touchscreen, Garmin navigation system, Bluetooth wireless technology, Apple CarPlay/Android Auto, HD Radio tuner, dual USB ports, rear camera input.

FeatureDescription
Display6.95-inch WVGA touchscreen with capacitive touch
NavigationBuilt-in Garmin navigation with lifetime map updates
Smartphone IntegrationApple CarPlay and Android Auto compatible
BluetoothHands-free calling and audio streaming
Audio SourcesHD Radio, SiriusXM Ready, USB, aux input
ConnectivityDual USB ports (front and rear)
Camera InputRear camera input for backup assistance
Audio Controls13-band EQ, time alignment, crossover settings
Power Output50W x 4 channels (MOSFET power IC)
Steering Wheel ControlCompatible with most vehicle steering wheel controls

Installation Preparation

Gather all necessary tools and components before beginning installation.

  1. Disconnect negative battery terminal for safety.
  2. Remove factory radio using appropriate removal tools.
  3. Test fit mounting kit and wiring harness adapter.
  4. Prepare wiring connections according to vehicle specifications.
  5. Connect GPS antenna in optimal location for signal reception.

WARNING! Always disconnect vehicle battery before beginning installation to prevent electrical shorts or damage to vehicle systems.

Wiring Connections

Proper wiring is essential for optimal performance and safety.

  1. Connect power wires: Red (ignition) and Yellow (battery) to corresponding vehicle wires.
  2. Connect ground wire (Black) to clean, bare metal surface on vehicle chassis.
  3. Connect speaker wires following vehicle speaker configuration.
  4. Connect antenna adapter for radio reception.
  5. Route GPS antenna to dashboard or windshield area with clear sky view.
  6. Connect rear camera input if installing backup camera.
  7. Secure all connections with crimp connectors or solder.

CAUTION! Ensure all connections are secure and properly insulated to prevent short circuits.

Specifications

Controls and Settings

Access settings via touchscreen interface and physical buttons.

Physical Controls: POWER/VOLUME knob, SRC (source) button, HOME button, hardware buttons for navigation.

Touchscreen Interface: Navigation shortcuts, audio controls, smartphone integration, system settings.

Audio Settings: 13-band equalizer, loudness, subwoofer control, time alignment, crossover settings. System Settings: Display brightness, button illumination, language selection, system reset. Navigation Settings: Route preferences, map display options, voice guidance settings.

Connecting Devices

Multiple connectivity options for various devices and accessories.

  1. Smartphones: Connect via USB for Apple CarPlay/Android Auto or Bluetooth for wireless connectivity.
  2. USB Devices: Connect flash drives or external hard drives to front or rear USB ports.
  3. Backup Camera: Connect to rear camera input for automatic display when vehicle in reverse.
  4. Steering Wheel Controls: Connect compatible interface module for retained steering wheel controls.
  5. Satellite Radio: Connect SiriusXM tuner module for satellite radio reception.

Tip: Use high-quality cables for best performance and reliability.

Navigation Setup

Built-in Garmin navigation provides comprehensive routing and guidance.

  1. Initial Setup: Complete first-time setup including language, units, and voice preferences.
  2. GPS Signal: Ensure clear view of sky for optimal GPS reception.
  3. Destination Entry: Use address search, points of interest, or recent destinations.
  4. Route Options: Select fastest route, shortest distance, or avoid specific road types.
  5. Map Updates: Connect to computer for lifetime map updates via Garmin Express.
  6. Traffic Information: Subscribe to traffic services for real-time traffic updates.
  7. Saved Locations: Save home, work, and favorite destinations for quick access.

WARNING! Always pay attention to road conditions and traffic laws while using navigation system.

Smartphone Integration

Seamless integration with Apple CarPlay and Android Auto.

  1. Apple CarPlay: Connect iPhone via USB cable for access to apps, messages, and music.
  2. Android Auto: Connect Android phone via USB for Google services and apps.
  3. Bluetooth Pairing: Pair phone for hands-free calling and audio streaming.
  4. Voice Control: Use Siri or Google Assistant for voice commands.
  5. App Integration: Access navigation, music, and communication apps through head unit.

Note: Some features may require compatible smartphone and active data connection.

Maintenance & Care

Proper maintenance ensures long-term performance and reliability.

Use only soft, dry cloth for cleaning touchscreen. Avoid chemical cleaners or abrasive materials. Keep unit free from excessive moisture and extreme temperatures. Regularly update navigation maps and system software.

CAUTION! Do not use sharp objects on touchscreen. Avoid liquid cleaners that may damage display.

Regulatory Information

FCC Part 15: Class B digital device compliant. This device complies with part 15 of FCC rules. Bluetooth qualified system. Manufactured under license from Garmin. Apple CarPlay is a trademark of Apple Inc. Android Auto is a trademark of Google LLC. For technical support, contact Kenwood customer service at 1-800-536-9663 or visit www.kenwood.com/usa.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerWiring connectionsCheck power and ground connections; verify fuse condition.
Poor GPS signalAntenna placementReposition GPS antenna for clear sky view; check connection.
Bluetooth not connectingPairing issuesDelete old pairing; restart both devices; attempt new pairing.
Touchscreen not responsiveCalibration/settingsClean screen; check for screen protector interference; reset unit.
No sound from speakersWiring/settingsVerify speaker connections; check audio settings and mute status.
Navigation not workingGPS signal/softwareEnsure GPS antenna connected; update navigation software.
Smartphone not connectingCable/compatibilityTry different USB cable; verify phone compatibility; restart devices.

Reset: Settings > System > Factory Reset if experiencing persistent issues.

Service: 1-800-536-9663; www.kenwood.com/usa

Kenwood DNX573S Installation Manual © - All Rights Reserved 2025