kenwood dnx690hd manual

The Kenwood DNX690HD is a high-definition navigation receiver with built-in GPS, HD Radio, Bluetooth connectivity, DVD playback, USB and auxiliary inputs, smartphone integration, and advanced audio controls. Features include 6.95-inch touchscreen display, Garmin navigation, dual phone connection, and customizable sound settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Navigation Features 8. Audio Playback 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 6.95-inch WVGA touchscreen display, Built-in Garmin navigation, HD Radio tuner, Bluetooth wireless technology, DVD/CD player, USB port, AUX input, Rear camera input.

FeatureDescription
Navigation SystemBuilt-in Garmin GPS with preloaded maps
Display6.95-inch WVGA touchscreen (800x480)
HD RadioDigital radio reception with multicasting
BluetoothHands-free calling and audio streaming
DVD PlaybackPlays DVD-Video, DVD-R/RW, CD-DA
USB PortFor iPod/iPhone control and USB storage
AUX Input3.5mm auxiliary audio input
Camera InputRear view camera connection
Audio Controls13-band EQ, time alignment, crossover
Power Output22W x 4 channels (MOSFET power IC)

Installation

Professional installation recommended. Ensure vehicle is parked and ignition is off.

  1. Disconnect negative battery terminal before beginning installation.
  2. Remove factory radio using proper removal tools.
  3. Connect wiring harness following color-coded wiring diagram.
  4. Connect GPS antenna and place for optimal satellite reception.
  5. Connect microphone for hands-free calling near driver position.
  6. Test all functions before final assembly.

WARNING! Installation requires automotive electrical knowledge. Incorrect installation may damage vehicle electronics.

First-Time Setup

Power on unit; follow initial setup wizard.

  1. Language selection: Choose preferred language for interface.
  2. Time/Date: Set current time and date format.
  3. Bluetooth pairing: Search for and connect to mobile device.
  4. Navigation setup: Accept terms, set home location.
  5. Audio settings: Configure sound preferences and equalizer.
  6. Source priority: Set default audio source order.

CAUTION! Do not operate navigation while driving. Pull over safely to configure settings.

Specifications

Controls and Settings

Primary control via touchscreen interface. Physical buttons: POWER/VOLUME, SRC, HOME.

Touchscreen Menus: NAVI, AUDIO, PHONE, SETUP, AV SOURCE.

Audio Settings: 13-band equalizer, loudness, fader, balance, subwoofer level. Navigation: Route preferences, avoidances, map display options. Phone: Contact sync, call history, message access. System: Display brightness, button illumination, language, reset options.

Connecting Devices

Multiple connectivity options for various audio sources and accessories.

  1. USB Connection: Connect iPod/iPhone or USB storage device
  2. Bluetooth: Pair mobile phone for hands-free calling
  3. AUX Input: 3.5mm cable for external audio devices
  4. Rear Camera: Connect backup camera for safety
  5. Steering Wheel: Interface with vehicle controls

Tip: Use genuine Kenwood cables for optimal performance and compatibility.

Navigation Features

Garmin navigation system with comprehensive routing and points of interest.

  1. Destination Entry: Address, intersection, points of interest
  2. Route Calculation: Fastest, shortest, eco route options
  3. Lane Guidance: Visual lane assistance for complex intersections
  4. Traffic Alerts: Real-time traffic information (subscription required)
  5. Speed Limits: Display current road speed limits
  6. Where Am I?: Emergency and service location information
  7. Favorites: Save frequently visited locations
  8. Trip Computer: Monitor trip statistics and fuel economy

WARNING! Always pay attention to road conditions. Navigation is a supplemental aid only.

Audio Playback

Multiple source playback with advanced audio processing.

  1. Radio: AM/FM/HD Radio with preset stations
  2. Disc Playback: DVD, CD, MP3 CD, DivX DVD
  3. USB Audio: iPod/iPhone control, USB mass storage
  4. Bluetooth Audio: Wireless streaming from mobile devices
  5. AUX Input: External audio devices
  6. Sound Settings: 13-band EQ, time alignment, crossover
  7. Playback Controls: Play, pause, skip, repeat, random
  8. iTunes Tagging: Tag songs from HD Radio for later purchase

Care & Cleaning

Turn off unit before cleaning. Use soft, dry cloth only.

CAUTION! Do not use chemical cleaners, aerosols, or abrasive materials. Avoid moisture contact with screen and controls.

Regulatory Information

FCC Part 15: Class B digital device compliant. This device complies with part 15 of the FCC Rules. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Garmin and the Garmin logo are trademarks of Garmin Ltd. HD Radio is a proprietary trademark of iBiquity Digital Corporation. For support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerWiring connectionCheck fuse and power connections; verify proper ground
No GPS signalAntenna placementReposition GPS antenna; ensure clear view of sky
Bluetooth not connectingPairing issueDelete old pairing; restart both devices; retry pairing
Touchscreen not respondingCalibration neededPerform touchscreen calibration in system settings
No sound from speakersAudio settingsCheck fader/balance settings; verify speaker connections
Disc not readingDisc compatibilityEnsure disc is clean and compatible format; check region code
Navigation not calculating routeGPS signalWait for GPS acquisition; check destination entry format

Reset: Settings > System > Factory Reset (erases all user data)

Service: 1-800-536-9663; www.kenwood.com

kenwood dnx690hd manual © - All Rights Reserved 2025