Kenwood DNX691HD Installation Manual

The Kenwood DNX691HD is a high-definition navigation receiver with 6.95-inch WVGA touchscreen display, built-in Garmin navigation, HD Radio tuner, Bluetooth connectivity, USB input, SiriusXM ready, dual camera input, and advanced audio/video capabilities. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Navigation Operation 8. Audio/Video Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 6.95-inch WVGA touchscreen display, Built-in Garmin navigation, HD Radio tuner, Bluetooth wireless technology, USB input, SiriusXM satellite radio ready, dual camera input.

Feature	Description
Display	6.95-inch WVGA touchscreen (800 x 480)
Navigation	Built-in Garmin navigation with lifetime map updates
Audio	HD Radio tuner with iTunes Tagging
Connectivity	Bluetooth for hands-free calling and audio streaming
USB Input	For iPod/iPhone control and USB storage devices
Satellite Radio	SiriusXM ready (subscription required)
Camera Input	Dual camera input for backup and auxiliary cameras
Video Playback	Supports DVD, DivX, MPEG formats
Audio Output	4V preamp outputs (Front/Rear/Subwoofer)
Power Output	22W x 4 channels (MOSFET power IC)

Installation

Unpack and inspect contents. Ensure vehicle is parked safely with parking brake engaged.

Disconnect negative battery terminal before installation.
Remove factory radio using appropriate removal tools.
Connect wiring harness adapter to vehicle's factory wiring.
Connect antenna adapter and GPS antenna.
Mount unit securely in dashboard.
Reconnect negative battery terminal.

WARNING! Disconnect battery before installation to prevent electrical shorts. Professional installation recommended.

First-Time Setup

Power on unit; follow on-screen prompts.

Language selection: Choose preferred language for interface.
Time/Date setup: Set current time and date format.
Navigation setup: Accept GPS terms and acquire satellite signal.
Bluetooth pairing: Pair mobile phone for hands-free operation.
Audio settings: Configure sound preferences and equalizer.

CAUTION! Do not operate navigation or video features while driving. Park vehicle for initial setup.

Specifications

Display: 6.95-inch WVGA TFT LCD touchscreen (800 x 480)
Navigation: Built-in Garmin navigation with lifetime maps
Radio: HD Radio tuner with iTunes Tagging
Bluetooth: Hands-free calling and audio streaming
USB: iPod/iPhone control and USB storage support
Video: DVD, DivX, MPEG playback
Power Output: 22W x 4 channels (MOSFET)
Preamp Outputs: 4V Front/Rear/Subwoofer
Camera Input: Dual camera input (RCA)
Power Requirement: 12V DC negative ground

Controls and Settings

Access functions via touchscreen interface and physical buttons. Front Panel: POWER/VOLUME knob, SRC (source) button, EJECT button.

Touchscreen: Navigation, Audio, Video, Phone, Settings, Map, AV Source selection.

Audio Settings: Equalizer (Rock, Pop, Jazz, etc.), Loudness, Balance/Fader, Subwoofer level. Navigation Settings: Route preferences, Avoidances, Map display options. System Settings: Display brightness, Beep sounds, Language, Clock format. Bluetooth Settings: Phone pairing, Contact sync, Audio streaming quality.

Connecting Devices

USB: Connect iPod/iPhone or USB storage. Bluetooth: Pair mobile devices. Camera: Connect backup camera to camera input.

Turn off vehicle ignition before connecting devices.
Use genuine Kenwood cables for optimal performance.
Connect USB device to USB port in rear of unit.
Pair Bluetooth devices through Settings menu.
Connect backup camera to camera input (RCA).

Tip: Ensure proper cable connections and use recommended accessories.

Navigation Operation

Built-in Garmin navigation with lifetime map updates.

Access navigation: Press NAVI button on screen.
Enter destination: Use touchscreen keyboard or voice command.
Route calculation: Unit calculates optimal route automatically.
Turn-by-turn guidance: Voice and visual directions provided.
Points of interest: Search for gas stations, restaurants, etc.
Traffic information: Real-time traffic updates (subscription may be required).
Map updates: Connect to computer for lifetime map updates.

WARNING! Program navigation only when vehicle is safely parked. Do not operate while driving.

Audio/Video Features

HD Radio, USB playback, Bluetooth audio, DVD video playback.

Radio: AM/FM/HD Radio with preset stations.
USB: Play music from USB devices or iPod/iPhone.
Bluetooth Audio: Stream music from paired devices.
DVD: Play DVD movies (parking brake must be engaged).
SiriusXM: Satellite radio (subscription required).
Equalizer: Multiple sound presets and custom settings.

Care & Maintenance

Use soft, dry cloth for cleaning screen. Do not use chemicals or abrasive cleaners.

CAUTION! Do not spray liquids directly on unit. Avoid extreme temperatures and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. This device complies with part 15 of the FCC Rules. Copyright © 2023 Kenwood Corporation; all rights reserved. For support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/connections	Check fuse and wiring connections; verify battery connection.
No sound	Settings/connections	Check volume settings; verify speaker connections; check mute.
GPS not working	Antenna/signal	Ensure GPS antenna connected properly; check for obstructions.
Bluetooth not pairing	Settings/compatibility	Ensure Bluetooth enabled on phone; delete old pairings; retry.
USB not recognized	Device/cable	Try different USB device; check cable connection; format device properly.

Reset: Settings > System > Factory Reset if available.

Service: 1-800-536-9663; www.kenwood.com