kenwood dnx6980 manual

The Kenwood DNX6980 is a premium in-dash navigation receiver with a 6.95-inch WVGA touchscreen display, built-in Garmin navigation, Bluetooth connectivity, HD Radio, SiriusXM compatibility, dual USB inputs, rear camera input, and support for various audio/video formats. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 6.95-inch WVGA touchscreen, Built-in Garmin navigation, Bluetooth hands-free, HD Radio tuner, Dual USB inputs, Rear camera input, SiriusXM ready.

Feature	Description
Display	6.95-inch WVGA touchscreen (800x480)
Navigation	Built-in Garmin navigation with lifetime maps
Bluetooth	Hands-free calling and audio streaming
HD Radio	Digital radio reception with artist/song info
USB Inputs	Dual USB ports for media playback
Camera Input	Rear view camera connection
SiriusXM	Satellite radio ready (tuner required)
Audio Formats	MP3, WMA, AAC, FLAC, WAV
Video Formats	MPEG, WMV, DivX, XviD
Power Output	22W x 4 channels

Installation

Professional installation recommended. Ensure vehicle is parked and ignition is off.

1. Disconnect negative battery terminal before beginning installation.
2. Remove factory radio using proper removal tools.
3. Connect wiring harness adapter to vehicle harness.
4. Connect GPS antenna and place for optimal reception.
5. Mount unit securely in dashboard.
6. Connect rear camera if applicable.
7. Reconnect battery and test all functions.

WARNING! Disconnect battery before installation to prevent electrical damage. Professional installation recommended.

First-Time Setup

Power on unit; follow initial setup wizard.

1. Language selection: Choose preferred language for interface.
2. Time/Date: Set current time and date format.
3. Bluetooth pairing: Pair your mobile phone for hands-free operation.
4. Navigation setup: Accept terms and configure navigation preferences.
5. Radio presets: Scan and save favorite radio stations.
6. Audio settings: Adjust EQ, balance, and fade to preference.

CAUTION! Do not operate navigation while driving. Pull over safely to input destinations.

Specifications

• Display: 6.95-inch WVGA TFT LCD touchscreen
• Resolution: 800 x 480 pixels
• Navigation: Built-in Garmin with lifetime map updates
• Bluetooth: Hands-free profile (HFP), A2DP streaming
• Radio: AM/FM tuner with HD Radio capability
• Power Output: 22 watts x 4 channels
• USB: Dual USB 2.0 ports
• Video Input: Rear camera input (RCA)
• Preamp Outputs: 3 pairs (Front, Rear, Subwoofer)
• Operating Voltage: 12V DC negative ground

Controls and Settings

Primary control via touchscreen interface. Physical buttons: POWER/VOLUME, SRC (source), MAP, HOME.

Touchscreen Controls: Navigation shortcut, Audio source selection, Phone controls, Settings menu, Camera view.

Audio Settings: EQ presets (Flat, Powerful, Natural, Vocal), Bass/Mid/Treble, Loudness, Subwoofer level. Navigation Settings: Route preferences, Avoidances, Map display options. System Settings: Display brightness, Beep tones, Bluetooth settings, Language.

Connecting Devices

USB: Connect flash drives or iPods. Bluetooth: Pair mobile phones. Camera: Connect rear view camera.

1. USB devices: Connect to either USB port for media playback.
2. Bluetooth: Enable pairing mode in settings, search from phone.
3. Rear camera: Connect camera to dedicated input during installation.
4. SiriusXM: Connect compatible tuner module.

Tip: Use high-quality USB cables for reliable connectivity.

Navigation Operation

Built-in Garmin navigation with lifetime maps.

1. Access navigation: Press MAP button or navigation icon.
2. Enter destination: Use keyboard or voice command.
3. Route calculation: Unit calculates fastest or shortest route.
4. Turn-by-turn: Follow voice guidance and on-screen directions.
5. Points of interest: Search for nearby gas, food, hotels.
6. Traffic alerts: Receive real-time traffic updates (subscription may be required).
7. Map updates: Connect to computer for lifetime map updates.

WARNING! Always pay attention to road conditions. Do not operate navigation while driving.

Audio/Video Playback

Supports various audio and video formats from USB and Bluetooth.

1. USB playback: Connect USB device, select USB source.
2. Bluetooth audio: Pair phone, select Bluetooth audio source.
3. Radio: Tune to AM/FM/HD Radio stations.
4. Video playback: Supported while vehicle is parked.
5. Playback controls: Play/pause, skip, repeat, shuffle.
6. Playlists: Create and manage music playlists.

Note: Video playback is disabled while vehicle is in motion for safety.

Care & Cleaning

Turn off unit before cleaning. Use soft, dry cloth only. Do not use chemicals or abrasive cleaners.

CAUTION! Never spray liquids directly on screen. Avoid extreme temperatures.

Regulatory Information

FCC Part 15 compliant. This device complies with part 15 of the FCC Rules. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Garmin and the Garmin logo are trademarks of Garmin Ltd. For support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/ignition	Check fuse and wiring connections; verify ignition signal.
No GPS signal	Antenna placement	Reposition GPS antenna; ensure clear view of sky.
Bluetooth not connecting	Pairing mode	Enable pairing mode; delete old pairing and reconnect.
USB not recognized	Format/cable	Use FAT32 format; try different USB cable or device.
No sound	Settings/connections	Check volume settings; verify speaker connections.
Screen not responsive	Calibration	Perform touchscreen calibration in settings menu.

Reset: Press reset button or disconnect battery for 30 seconds.

Service: 1-800-536-9663; www.kenwood.com