Kenwood DNX7140 Installation Manual

The Kenwood DNX7140 is a premium in-dash navigation multimedia receiver featuring a 6.1-inch touchscreen display, built-in GPS navigation, DVD playback, Bluetooth connectivity, USB input, iPod/iPhone compatibility, HD Radio ready, satellite radio ready, and advanced audio controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation Preparation 3. Wiring Connections 4. Specifications 5. Controls and Settings 6. Connecting External Devices 7. Navigation Setup 8. Bluetooth Pairing 9. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 6.1-inch WVGA touchscreen display, Built-in GPS navigation, DVD/CD player, Bluetooth wireless technology, USB port, iPod direct control, HD Radio capability.

Feature	Description
Display	6.1-inch WVGA TFT touchscreen (800 x 480)
Navigation	Built-in GPS with preloaded maps
Audio Sources	DVD, CD, USB, iPod, Bluetooth audio
Connectivity	Bluetooth, USB, AUX input, iPod direct
Radio	AM/FM tuner with HD Radio ready
Video Output	RCA composite video output
Power Output	50W x 4 channels (MOSFET power IC)
EQ Controls	13-band equalizer with digital time alignment
Steering Wheel	Compatible with steering wheel control interfaces
Backup Camera	Ready for backup camera input

Installation Preparation

Gather all necessary tools and components before beginning installation.

Disconnect negative battery terminal for safety.
Remove factory radio using appropriate removal tools.
Prepare mounting kit and wiring harness adapter.
Test fit the unit in dashboard before final installation.
Connect all wiring harnesses and antenna adapters.

WARNING! Always disconnect vehicle battery before installation to prevent electrical shorts or damage to vehicle systems.

Wiring Connections

Proper wiring is essential for optimal performance and safety.

Connect power wires: Red (ACC) to ignition switch, Yellow (BATT) to constant power, Black (GND) to chassis ground.
Connect speaker wires following color coding: White/White-black (Front L), Gray/Gray-black (Front R), Green/Green-black (Rear L), Purple/Purple-black (Rear R).
Connect antenna adapter and GPS antenna.
Connect optional devices: USB cable, iPod cable, backup camera, steering wheel control interface.
Secure all connections with electrical tape or heat shrink tubing.

CAUTION! Ensure all connections are secure and insulated to prevent short circuits.

Specifications

Display: 6.1-inch WVGA TFT LCD touchscreen (800 x 480 pixels)
Navigation: Built-in GPS with Garmin navigation software
DVD Playback: DVD-Video, DVD-R/RW, DVD+R/RW
CD Playback: CD-DA, CD-R/RW, MP3/WMA CDs
USB Support: MP3, WMA, AAC playback from USB devices
Bluetooth: Hands-free calling, audio streaming
Power Output: 50W x 4 (max), 22W x 4 (RMS)
Preamp Outputs: 3 pairs (Front, Rear, Subwoofer)
Operating Voltage: 14.4V DC (11-16V allowable)
Dimensions: DIN size (178mm x 100mm)

Controls and Settings

Access all functions through touchscreen interface and physical buttons.

Physical Controls: POWER/VOLUME knob, SRC (source) button, EJECT button, hardware navigation buttons.

Touchscreen Menus: Source selection, Navigation, Audio settings, Phone, Setup. Audio Settings: 13-band equalizer, Loudness, Bass/Mid/Treble, Subwoofer level, Time alignment. System Settings: Display brightness, Beep tones, Language, Clock, Bluetooth settings. Navigation Settings: Route preferences, Map display, Voice guidance, Points of interest.

Connecting External Devices

Multiple options for connecting external audio/video sources.

USB Connection: Connect USB device to USB port for music playback.
iPod/iPhone: Use Kenwood KCA-iP202V cable for direct control and charging.
Bluetooth: Pair compatible phones for hands-free calling and audio streaming.
Backup Camera: Connect camera to camera input for reverse gear activation.
AUX Input: 3.5mm auxiliary input for external audio devices.

Tip: Use genuine Kenwood accessories for optimal compatibility and performance.

Navigation Setup

Built-in Garmin navigation provides turn-by-turn directions.

Initial Setup: Calibrate touchscreen and set home location during first use.
Destination Entry: Use touch keyboard to enter addresses or search points of interest.
Route Planning: Select fastest time, shortest distance, or avoid highways/tolls.
Map Display: Adjust map orientation (North up or Heading up), zoom level, and detail.
Voice Guidance: Enable/disable voice prompts and adjust volume.
Traffic Information: Compatible with optional traffic receiver for real-time updates.
Saved Locations: Store frequently visited destinations for quick access.
Route Preview: Review planned route before beginning navigation.

WARNING! Do not operate navigation functions while driving. Pull over safely to enter destinations.

Bluetooth Pairing

Connect mobile phones for hands-free calling and audio streaming.

Enable Bluetooth on your mobile phone and set to discoverable mode.
Press PHONE button on unit or access Phone menu from source selection.
Select "Pair New Device" and search for available devices.
Select "KENWOOD" from your phone's Bluetooth device list.
Enter PIN code "1234" when prompted (default code).
Confirm pairing on both devices and set as trusted connection.
Download phonebook if supported by your phone model.

Note: Some phone features may not be available depending on phone model and Bluetooth version.

Maintenance & Care

Proper maintenance ensures long-term performance and reliability.

Cleaning: Use soft, dry cloth for screen cleaning. For stubborn smudges, lightly dampen cloth with water. Avoid chemical cleaners, solvents, or abrasive materials. Storage: Keep unit dry and avoid extreme temperatures. When not in use for extended periods, store in original packaging. Disc Handling: Handle DVDs and CDs by edges only. Keep discs clean and free from scratches.

CAUTION! Do not use alcohol, benzene, or other chemical cleaners on touchscreen. Never insert foreign objects into disc slot or ports.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. Operation subject to conditions that device does not cause harmful interference. IC Compliance: Complies with Industry Canada license-exempt RSS standard(s). Bluetooth: Qualified Bluetooth® product. Garmin: Navigation software provided by Garmin. Copyright © Kenwood Corporation. For technical support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring connections	Check battery and ignition connections; verify fuse condition.
No sound from speakers	Speaker wiring	Verify speaker wire connections; check speaker impedance (4-8 ohms).
Bluetooth not connecting	Pairing issues	Delete old pairing; reset Bluetooth settings; ensure phone compatibility.
Navigation not working	GPS antenna	Ensure GPS antenna has clear view of sky; check antenna connection.
Disc not reading	Disc compatibility/damage	Check disc format compatibility; clean disc surface; try different disc.
Touchscreen not responding	Calibration/settings	Recalibrate touchscreen; check for screen protector interference.
USB device not recognized	Format/compatibility	Use FAT32 formatted devices; check file format compatibility.

Reset: Press reset button with pointed object if unit becomes unresponsive.

Service: 1-800-536-9663; www.kenwood.com