Kenwood DNX7190HD Manual

The Kenwood DNX7190HD is a premium 2-DIN multimedia navigation receiver featuring a 6.95-inch WVGA touchscreen display, built-in Garmin navigation, HD Radio tuner, Bluetooth connectivity, USB input, auxiliary input, rear camera input, and compatibility with various audio/video formats. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Navigation Operation 8. Audio/Video Playback 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 6.95-inch WVGA touchscreen display, Built-in Garmin navigation, HD Radio tuner, Bluetooth connectivity, USB port, Auxiliary input, Rear camera input.

FeatureDescription
Display6.95-inch WVGA touchscreen (800 x 480 pixels)
NavigationBuilt-in Garmin navigation with preloaded maps
HD RadioDigital radio reception with artist/song information
BluetoothHands-free calling and audio streaming
USB PortFor iPod/iPhone control and USB storage devices
Auxiliary Input3.5mm audio input for external devices
Rear Camera InputFor backup camera connection
Audio FormatsMP3, WMA, AAC, WAV
Video FormatsMPEG-1, MPEG-2, DivX
Power Output22W x 4 channels (MOSFET power IC)

Installation

Professional installation recommended. Ensure vehicle is parked and ignition is off.

  1. Disconnect negative battery terminal before installation.
  2. Remove factory radio using appropriate removal tools.
  3. Connect wiring harness following color-coded wiring diagram.
  4. Connect antenna, USB extension, and other peripheral cables.
  5. Secure unit in dash and reassemble trim panels.
  6. Reconnect battery and test all functions.

WARNING! Incorrect installation may damage vehicle electrical system. Use only qualified installer.

First-Time Setup

Power on unit; follow initial setup wizard.

  1. Language selection: Choose preferred language for interface.
  2. Time/Date settings: Set current time and date format.
  3. Bluetooth pairing: Pair mobile phone for hands-free operation.
  4. Navigation setup: Accept terms and configure navigation preferences.
  5. Audio settings: Adjust equalizer, balance, and fader settings.
  6. Source priority: Set default audio source order.

CAUTION! Do not operate navigation while driving. Pull over safely to adjust settings.

Specifications

Controls and Settings

Primary control via touchscreen interface. Physical buttons: POWER/VOLUME, SRC, HOME, MAP.

Touchscreen Interface: Home screen with app icons, Settings menu, Audio controls, Navigation shortcut.

Audio Settings: 13-band equalizer, Time alignment, Crossover settings, Loudness, Subwoofer level. System Settings: Display brightness, Beep tones, Button illumination, Language, Units. Navigation Settings: Route preferences, Avoidances, Vehicle type, Map display options. Bluetooth Settings: Phone pairing, Contact sync, Audio streaming quality.

Connecting Devices

USB: Connect iPod/iPhone or USB storage. Auxiliary: 3.5mm audio input. Bluetooth: Wireless audio and phone.

  1. Ensure unit is powered on and in appropriate source mode.
  2. Connect USB device to USB port using compatible cable.
  3. For auxiliary input, connect 3.5mm audio cable from external device.
  4. Bluetooth devices: Access Bluetooth menu to pair new devices.
  5. Rear camera: Connect backup camera to designated input.

Tip: Use high-quality cables for best audio/video performance.

Navigation Operation

Built-in Garmin navigation with voice guidance and traffic updates.

  1. Access navigation: Press MAP button or navigation icon.
  2. Enter destination: Use keyboard or voice command to input address.
  3. Route calculation: System calculates optimal route based on settings.
  4. Guidance: Follow turn-by-turn directions with voice prompts.
  5. Points of interest: Search for nearby gas, food, hotels, etc.
  6. Traffic alerts: Receive real-time traffic information and detours.
  7. Map updates: Connect to computer for lifetime map updates.

WARNING! Do not operate navigation interface while vehicle is in motion.

Audio/Video Playback

Supports various audio and video formats from multiple sources.

  1. Source selection: Press SRC button or touch source icon.
  2. USB playback: Browse folders and files using touchscreen.
  3. Bluetooth audio: Stream music from paired mobile devices.
  4. HD Radio: Access digital radio stations with song information.
  5. Video playback: Supported formats from USB or disc media.
  6. Playback controls: Play, pause, skip, repeat, shuffle functions.
  7. Sound adjustments: Access equalizer and sound settings menus.

NOTE: Video playback only available when parking brake is engaged.

Care & Cleaning

Turn off unit before cleaning. Use soft, dry cloth for screen. Avoid chemicals and abrasives.

CAUTION! Do not use alcohol, solvents, or abrasive cleaners on touchscreen.

Regulatory Information

FCC Part 15: Class B digital device compliant. This device complies with part 15 of FCC rules. Copyright © Kenwood Corporation. Garmin and the Garmin logo are trademarks of Garmin Ltd. Bluetooth is a registered trademark of Bluetooth SIG, Inc. For support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerWiring/ignitionCheck fuse, wiring connections, and ignition input.
Touchscreen not respondingCalibration/settingsRecalibrate touchscreen in system settings menu.
Bluetooth not connectingPairing/compatibilityDelete old pairings and re-pair device; check compatibility.
Navigation not workingGPS signal/settingsEnsure clear view of sky; check navigation settings.
No audio from specific sourceConnections/settingsCheck cables and source-specific audio settings.
USB device not recognizedFormat/compatibilityUse FAT32 format; check supported device list.

Reset: Settings > System > Factory Reset if available.

Service: 1-800-536-9663; www.kenwood.com

Kenwood DNX7190HD Manual © - All Rights Reserved 2025