Kenwood DNX7200 Manual

The Kenwood DNX7200 is a premium in-dash navigation and multimedia receiver featuring a 6.95-inch touchscreen display, built-in GPS navigation with Garmin technology, DVD/CD playback, Bluetooth connectivity, HD Radio compatibility, USB and auxiliary inputs, satellite radio readiness, and advanced audio controls. Below are key sections for features, installation, operation, settings, and troubleshooting.

Features at a Glance

Key components: 6.95-inch WVGA touchscreen display, Garmin navigation system, DVD/CD player, Bluetooth hands-free, USB port, auxiliary input, HD Radio tuner.

Installation

Professional installation recommended. Ensure vehicle is parked with parking brake engaged.

1. Disconnect negative battery terminal before installation.
2. Remove factory radio using appropriate tools.
3. Connect wiring harness following color-coded wires.
4. Connect GPS antenna to rear of unit and place on dashboard.
5. Connect Bluetooth microphone near driver's position.
6. Secure unit in dashboard and test all functions.

WARNING! Installation requires electrical knowledge. Incorrect installation may damage vehicle electronics.

First-Time Setup

Power on unit; follow initial setup wizard.

1. Language selection: Choose preferred language for interface.
2. Time/Date: Set current time and date format.
3. Navigation setup: Accept GPS terms and calibrate touchscreen.
4. Bluetooth pairing: Pair mobile phone for hands-free operation.
5. Radio presets: Scan and save favorite radio stations.

CAUTION! Complete setup only when vehicle is parked in safe location.

Specifications

• Display: 6.95-inch WVGA TFT LCD touchscreen
• Navigation: Garmin navigation with preloaded North America maps
• Media Formats: DVD-Video, DVD-R/RW, CD, CD-R/RW, MP3, WMA, AAC
• Bluetooth: Hands-free profile (HFP), audio streaming (A2DP)
• Audio Output: 50W x 4 (MOSFET), 13-band equalizer
• Inputs: USB, auxiliary, rear camera input
• Tuner: FM/AM with HD Radio capability
• Power Supply: 12V DC negative ground
• Dimensions: DIN size (7 x 2 inches)

Controls and Settings

Primary control via touchscreen interface. Physical buttons: POWER/VOLUME, SOURCE, MAP, MENU.

Touchscreen Controls: Navigation shortcut, audio settings, phone, source selection, setup menu.

Audio Settings: Equalizer (13-band), loudness, fader/balance, time alignment. Navigation Settings: Route preferences, map display, voice guidance. System Settings: Display brightness, button illumination, language, reset options. Phone Settings: Pairing, contacts, call history.

Connecting Devices

USB: Connect iPod/iPhone or USB storage. Auxiliary: 3.5mm audio input. Bluetooth: Wireless connection for phones and audio.

1. Ensure vehicle is in park with parking brake engaged.
2. Connect USB cable to compatible device or storage.
3. For auxiliary input, use 3.5mm audio cable.
4. Bluetooth devices must be in pairing mode.
5. Select appropriate source on unit.

Tip: Use genuine cables for optimal performance and compatibility.

Navigation Operation

Garmin-based navigation with touchscreen interface.

1. Press MAP button to access navigation.
2. Enter destination using address search or points of interest.
3. Select route preferences (fastest, shortest, avoid highways).
4. Follow turn-by-turn voice guidance and on-screen directions.
5. Use detour function for route adjustments.
6. Save frequently visited locations as favorites.
7. View trip information including ETA and distance.

WARNING! Program navigation only when vehicle is safely parked.

Media Playback

Supports DVD, CD, USB media, and Bluetooth audio streaming.

1. Insert disc: Unit automatically loads and reads media.
2. USB playback: Connect device and select USB source.
3. Navigation: Use touchscreen or remote for track selection.
4. Play modes: Repeat, shuffle, folder selection.
5. Video playback: Available when parking brake is engaged.
6. Audio settings: Adjust EQ and sound fields during playback.

CAUTION! Do not watch video while driving. Park vehicle for video content.

Bluetooth Connectivity

Hands-free calling and audio streaming capabilities.

1. Access phone menu from main screen.
2. Select "Pair Phone" and search for devices.
3. Enter PIN if required (default: 0000).
4. Accept pairing on mobile device.
5. Access contacts, call history, and dial pad.
6. For audio streaming, select Bluetooth audio source.

Note: Some phone features may vary by device and compatibility.

Troubleshooting

Reset: System Settings > Factory Reset (use as last resort)

Service: Contact authorized Kenwood service center or visit www.kenwood.com