Kenwood DNX890HD Manual

The Kenwood DNX890HD is a premium in-dash navigation receiver with HD Radio, built-in Garmin navigation, Bluetooth connectivity, DVD playback, USB/iPod connectivity, and advanced audio controls. Features include 6.95-inch touchscreen display, dual-zone capability, SiriusXM compatibility, and support for various audio/video formats. Below are key sections for features, installation, operation, and troubleshooting.

Features at a Glance

Key components: 6.95-inch WVGA touchscreen, Garmin navigation system, HD Radio tuner, Bluetooth hands-free, DVD/CD player, USB port, iPod direct control.

Feature	Description
Navigation System	Built-in Garmin navigation with preloaded maps
Display	6.95-inch WVGA resistive touchscreen
Audio Sources	AM/FM radio, HD Radio, SiriusXM, CD, DVD, USB, iPod
Bluetooth	Hands-free calling and audio streaming
Video Playback	DVD, DivX, MPEG formats supported
Audio Output	4-channel 50W x 4 MOSFET power
Connectivity	USB, AUX input, rear camera input
Dual Zone	Separate audio for front and rear passengers
EQ Controls	13-band equalizer with time alignment
Steering Wheel Control	Compatible with most vehicle interfaces

Installation

Professional installation recommended. Ensure vehicle is parked and ignition is off.

1. Disconnect negative battery terminal before beginning installation.
2. Remove factory radio using appropriate tools for your vehicle.
3. Connect wiring harness adapter to vehicle's wiring system.
4. Connect GPS antenna and place for optimal satellite reception.
5. Mount unit securely in dashboard and reconnect battery.

WARNING! Installation requires automotive electrical knowledge. Incorrect installation may damage vehicle electronics.

First-Time Setup

Power on unit; follow initial setup wizard.

1. Language selection: Choose preferred language for interface.
2. Time/Date settings: Set current time and date format.
3. Navigation setup: Accept GPS terms, wait for satellite acquisition.
4. Bluetooth pairing: Pair your mobile device for hands-free operation.
5. Radio presets: Scan and save favorite radio stations.

CAUTION! Do not operate navigation system while driving. Park vehicle for initial setup.

Specifications

• Display: 6.95-inch WVGA TFT LCD touchscreen
• Navigation: Built-in Garmin with preloaded North America maps
• Radio: AM/FM tuner with HD Radio technology
• Power Output: 50W x 4 channels (MOSFET)
• Video Playback: DVD, DVD-R/RW, DivX, MPEG
• Audio Formats: MP3, WMA, AAC, WAV
• Connectivity: USB, Bluetooth, AUX input, iPod direct
• Power Supply: 12V DC negative ground
• Dimensions: DIN size (7 x 2 inches)

Controls and Settings

Primary control via touchscreen interface. Physical buttons: POWER/VOLUME, SRC, MAP, MENU.

Touchscreen Interface: Home screen with source selection, navigation shortcut, settings access.

Audio Settings: 13-band equalizer, loudness, fader/balance, time alignment. Source Settings: Radio presets, Bluetooth pairing, USB device management. Navigation Settings: Route preferences, map display options, points of interest. System Settings: Display brightness, button sounds, language, system information.

Connecting Devices

USB: Connect flash drives or iPods. Bluetooth: Pair mobile devices. AUX: 3.5mm audio input.

1. Ensure ignition is on and unit is powered.
2. For USB: Connect device to USB port, select USB source.
3. For Bluetooth: Access phone settings, search for devices, select "KENWOOD".
4. For AUX: Connect audio cable to AUX input, select AUX source.

Tip: Use genuine Kenwood cables for optimal performance and compatibility.

Navigation Operation

Garmin navigation system with voice guidance and traffic updates.

1. Access navigation: Press MAP button or navigation icon.
2. Enter destination: Use keyboard or voice command to input address.
3. Route calculation: System calculates fastest or shortest route.
4. Guidance: Follow turn-by-turn directions with voice prompts.
5. Points of Interest: Search for nearby gas, food, hotels, etc.
6. Traffic: View real-time traffic conditions (subscription required).
7. Map display: Adjust zoom level, orientation, and detail level.

WARNING! Program navigation only when vehicle is safely parked.

Audio/Video Playback

Supports various audio and video formats from multiple sources.

1. Radio: AM/FM with HD Radio capability, preset stations.
2. CD/DVD: Insert disc, automatic playback begins.
3. USB: Connect storage device, browse folders and files.
4. iPod: Direct control through USB connection.
5. Bluetooth Audio: Stream music from paired devices.
6. Video: DVD playback with parking brake safety interlock.

Note: Video playback only functions when parking brake is engaged.

Bluetooth Connectivity

Hands-free calling and audio streaming capabilities.

1. Pairing: Access phone settings, search for "KENWOOD", enter PIN (0000).
2. Calling: Make/receive calls using touchscreen or voice commands.
3. Phonebook: Sync contacts from paired device.
4. Audio Streaming: Play music from Bluetooth-enabled devices.
5. Settings: Adjust call volume, auto answer, and connection priority.

Tip: Keep mobile device within reasonable range for stable connection.

Maintenance

Clean screen with soft, dry cloth only. Avoid chemical cleaners.

CAUTION! Do not use abrasive materials or liquid cleaners on touchscreen. Keep unit dry and avoid extreme temperatures.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/ignition	Check fuse, wiring connections, ignition signal.
No GPS signal	Antenna placement	Reposition GPS antenna, ensure clear sky view.
Bluetooth not connecting	Pairing/range	Delete old pairing, re-pair device, check distance.
USB not recognized	Format/compatibility	Use FAT32 format, check device compatibility.
No sound	Settings/connections	Check volume, mute, speaker connections, fader settings.

Reset: Press reset button with pointed object if unit becomes unresponsive.

Service: Contact authorized Kenwood service center for repairs.