Kenwood DNX9980HD Installation Manual

The Kenwood DNX9980HD is a premium 2-DIN multimedia navigation receiver featuring a 6.95-inch WVGA touchscreen display, built-in Garmin navigation, HD Radio tuner, Bluetooth connectivity, USB input, rear camera input, SiriusXM readiness, and compatibility with various audio/video formats. Below are key sections for installation, features, setup, operation, and troubleshooting.

Features at a Glance

Key components: 6.95-inch WVGA touchscreen, Garmin navigation system, HD Radio tuner, Bluetooth hands-free, USB port, rear camera input, SiriusXM connectivity.

Installation Preparation

Gather all necessary tools and components before beginning installation.

1. Disconnect negative battery terminal for safety.
2. Remove factory radio using appropriate removal tools.
3. Test fit mounting kit and wiring harness adapter.
4. Prepare all necessary cables and connectors.
5. Verify vehicle compatibility and required accessories.

WARNING! Always disconnect battery before installation to prevent electrical shorts or damage.

Wiring Connections

Connect wiring harness following color-coded scheme.

1. Match wire colors: Red (ignition), Yellow (battery), Black (ground).
2. Connect speaker wires: Front/Rear channels as per vehicle setup.
3. Install antenna adapter for radio reception.
4. Connect steering wheel control interface if applicable.
5. Route camera cable to rear of vehicle if installing backup camera.
6. Connect USB extension cable to accessible location.

CAUTION! Use proper crimp connectors or solder for secure connections. Avoid loose wires.

Mounting Procedure

Secure unit in dashboard using provided mounting hardware.

1. Attach mounting sleeve to vehicle dash kit.
2. Connect wiring harness to unit and test basic functions.
3. Slide unit into dash opening until it clicks into place.
4. Install security bracket and anti-theft screws.
5. Reconnect negative battery terminal.
6. Test all functions before final assembly.

Tip: Ensure all cables are routed properly to avoid pinching or interference.

First-Time Setup

Initial configuration after installation.

1. Power on unit and follow initial setup wizard.
2. Set language, time zone, and display preferences.
3. Configure audio settings: EQ, fade/balance, time alignment.
4. Pair Bluetooth devices for hands-free operation.
5. Calibrate touchscreen if necessary.
6. Update navigation maps if required.

Note: Keep vehicle in safe location during initial setup process.

Specifications

• Display: 6.95-inch WVGA TFT LCD touchscreen
• Resolution: 800 x 480 pixels
• Navigation: Built-in Garmin with preloaded North America maps
• Radio Tuner: FM/AM/HD Radio with 18FM/6AM presets
• Bluetooth: Hands-free profile, audio streaming, phonebook access
• Video Formats: DVD, DivX, MPEG1/2/4, WMV
• Audio Formats: MP3, WMA, AAC, WAV, FLAC
• Power Output: 22W x 4 channels (MOSFET)
• Inputs/Outputs: 3 RCA preouts (4V), rear camera input, USB
• Dimensions: 178mm(W) x 100mm(H) x 160mm(D)

Controls and Functions

Front panel controls and touchscreen interface overview.

Physical Controls: POWER/VOLUME knob, SRC (source) button, hardware buttons for navigation shortcuts.

Touchscreen Interface: Home screen with customizable shortcuts, swipe gestures for menu navigation, on-screen keyboard for address entry.

Audio Settings: 13-band equalizer, digital time alignment, crossover settings, loudness control, source level adjustment.

Display Settings: Brightness, contrast, color temperature, screen off timer, button illumination color.

Connecting External Devices

Integration with various external components and accessories.

1. USB Devices: Connect iPod/iPhone or USB storage for media playback
2. Backup Camera: Connect to rear camera input for automatic activation in reverse
3. Steering Wheel Controls: Interface with compatible SWC adapters
4. SiriusXM: Connect SXV300 tuner module for satellite radio
5. Amplifiers: Use RCA preouts for external amplifier connection
6. Parking Brake: Connect parking brake wire for video playback safety

Important: Always connect parking brake wire for legal video playback operation.

Navigation Setup

Configuring and using the built-in Garmin navigation system.

1. Access navigation from home screen or NAV button
2. Enter destination using address search, points of interest, or recent destinations
3. Configure route preferences: fastest route, shortest distance, avoid highways
4. Set up traffic alerts and alternative routes
5. Save home and work locations for quick navigation
6. Update maps using Garmin Express software and computer

Tip: Keep navigation software updated for latest maps and features.

Bluetooth Pairing

Connecting mobile devices for hands-free calling and audio streaming.

1. Enable Bluetooth on mobile device
2. Access Bluetooth settings in unit menu
3. Select "Pair New Device" and search for "KENWOOD"
4. Enter PIN if prompted (default: 0000)
5. Grant permissions for contacts and call history
6. Test call quality and audio streaming

Note: Some phones may require additional permissions for full functionality.

Troubleshooting

Reset: Press reset button or disconnect battery for 30 seconds.

Support: 1-800-536-9663; www.kenwood.com/usa