Kenwood DPX 5000 User Manual

The Kenwood DPX 5000 is a high-performance digital media receiver with CD playback, USB connectivity, Bluetooth audio streaming, AM/FM tuner, 4-channel preamp outputs, customizable illumination, detachable faceplate security, and advanced audio controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Bluetooth Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital media receiver, Remote Control, USB port, AUX input, Bluetooth connectivity, Preamp outputs, Detachable faceplate.

Feature	Description
USB port	For USB flash drives and device connectivity
Bluetooth	Wireless audio streaming and hands-free calling
CD playback	Supports CD-DA, CD-R, CD-RW formats
AUX input	3.5mm auxiliary input for external devices
Preamp outputs	4-channel RCA outputs for external amplifiers
Detachable faceplate	Security feature to prevent theft
Illumination	Customizable button and display colors
EQ settings	13-band equalizer with preset and custom modes
Power	50W x 4 channels maximum output
Radio	AM/FM tuner with 18 FM and 6 AM presets

Installation

Unpack and inspect contents. Verify DIN size compatibility.

Disconnect vehicle battery: Ensure safety during installation.
Mount receiver: Secure in DIN slot using mounting sleeve and brackets.
Connect wiring: Match wire colors (red-ignition, yellow-battery, black-ground).
Connect speakers: Use appropriate gauge speaker wire.
Connect antennas: Attach FM/AM antenna and GPS if applicable.
Reconnect battery and test unit.

WARNING! Disconnect battery before installation to prevent electrical shorts. Ensure proper grounding.

First-Time Setup

Power on unit; follow initial configuration.

Set clock: Press SOURCE to enter setup mode, adjust time.
Program radio presets: Tune to desired stations, press and hold preset buttons.
Configure Bluetooth: Pair mobile device in BT AUDIO mode.
Adjust audio settings: Set EQ, balance, fader to preference.
Customize illumination: Select button and display colors.

CAUTION! Do not operate while driving. Park vehicle for initial setup.

Specifications

Power Output: 50W x 4 channels (max), 22W x 4 channels (RMS)
Supported Media: CD, CD-R, CD-RW, MP3/WMA CDs, USB flash drives
Bluetooth: Version 2.1 + EDR, A2DP, AVRCP
Frequency Response: 10Hz - 20kHz
Signal-to-Noise: 95dB (CD), 80dB (FM)
Preamp Outputs: 4-channel, 2V RMS
Illumination: 13-color customizable display and buttons
Power Requirement: 12V DC, negative ground
Dimensions: DIN size (178mm x 50mm)

Controls and Settings

Front Panel: POWER/VOLUME knob, SOURCE, BAND, APS, TUNE knobs, USB port.

Remote: POWER, Numeric buttons, SOURCE, VOLUME, MUTE, BAND, APS, TUNE, PLAY/PAUSE.

Audio Settings: 13-band equalizer, Loudness, Bass/Mid/Treble, Balance/Fader, Subwoofer level. Source Settings: Radio presets, Bluetooth pairing, USB mode. Display Settings: Dimmer, Illumination color, Clock format. Security: Detachable faceplate, Code entry.

Connecting Devices

USB: Front/rear port for flash drives. AUX: 3.5mm input. Bluetooth: Wireless pairing.

Turn off unit before connecting devices.
USB: Insert flash drive, select USB source.
AUX: Connect 3.5mm cable from external device.
Bluetooth: Enable pairing mode, search from mobile device.
Select source via SOURCE button (FM/AM/CD/USB/BT/AUX).

Tip: Format USB drives to FAT32 for best compatibility.

Playing Media

Supports CD, USB, Bluetooth audio playback.

Insert media: Load CD or connect USB device.
Play: Press PLAY; navigate folders with TUNE knob.
Skip tracks: Press TUNE left/right or remote arrows.
Repeat/shuffle: Press APS for play mode options.
Fast forward/rewind: Press and hold TUNE buttons.
Folder navigation: Rotate TUNE knob to browse directories.
Bluetooth control: Use remote or unit buttons for playback.
Radio tuning: Manual tune with TUNE or seek with BAND.

WARNING! Do not insert damaged discs. Keep USB ports clean and dry.

Bluetooth Features

Wireless Audio Streaming: Play music from compatible devices. Hands-free Calling: Answer/end calls, redial, voice dial. Phonebook Access: Download and browse contacts.

Pairing: Enable BT on device, select "KENWOOD_DPX5000" from list.

Care & Maintenance

Use soft, dry cloth for cleaning. Avoid chemicals and abrasives. Remove faceplate when parking in unsafe areas.

CAUTION! Do not use solvents; keep liquids away from unit. Store faceplate in protective case.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. ICES-003: Complies with Canadian ICES-003 standard. Bluetooth: Qualified Bluetooth product. Copyright © 2024 Kenwood Corporation; trademarks of JVCKENWOOD Corporation. For support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check battery and ignition connections; verify fuse condition.
No sound	Settings/speakers	Check volume, mute setting; verify speaker connections.
Bluetooth not connecting	Pairing/range	Delete old pairing; ensure within 10ft range; restart devices.
USB not recognized	Format/power	Reformat to FAT32; try different USB device; check power.
CD skipping	Disc/vehicle vibration	Clean disc; ensure proper mounting; check for vibration sources.
Poor radio reception	Antenna/location	Check antenna connection; verify antenna amplifier power.

Reset: Disconnect battery for 30 seconds to reset unit.

Service: 1-800-536-9663; www.kenwood.com