Kenwood DPX 5000BT Manual

The Kenwood DPX 5000BT is a high-performance digital media receiver featuring Bluetooth connectivity, USB input, CD playback, AM/FM tuner, and advanced audio controls. With 50W x 4 channels, built-in amplifier, customizable display colors, and support for various audio formats, this receiver delivers superior sound quality and connectivity options for your vehicle. Below are key sections covering features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Bluetooth Operation 8. Audio Settings 9. Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital media receiver with Bluetooth, USB port, CD player, AM/FM tuner, Remote Control, Front panel controls, Rear connection panel.

Feature	Description
Bluetooth connectivity	For hands-free calling and audio streaming
USB input	For connecting USB devices and charging
CD playback	Supports CD-DA, MP3, WMA formats
AM/FM tuner	With preset stations and RDS
Power output	50W x 4 channels (max)
Display customization	Adjustable illumination colors
Audio controls	Bass, treble, balance, fader adjustments
Remote control	Included for convenient operation
Auxiliary input	3.5mm jack for external audio sources
Preamp outputs	Front, rear, and subwoofer outputs

Installation

Unpack and inspect all components. Ensure proper mounting in vehicle dashboard.

Disconnect vehicle battery: Remove negative terminal for safety.
Remove existing stereo: Use appropriate removal tools for your vehicle.
Connect wiring harness: Match colors and functions carefully.
Connect antenna: Attach vehicle antenna cable.
Mount receiver: Secure in dashboard using supplied brackets.
Reconnect battery: Restore power connection.

WARNING! Professional installation recommended. Ensure all connections are secure and insulated.

First-Time Setup

Power on unit; follow initial configuration steps.

Set clock: Press SOURCE to enter setup mode, adjust time.
Pair Bluetooth: Enter pairing mode, search from mobile device.
Program radio presets: Scan and save favorite stations.
Adjust audio settings: Set bass, treble, balance to preference.
Customize display: Select illumination color scheme.

CAUTION! Do not operate while driving. Park vehicle for initial setup.

Specifications

Power Output: 50W x 4 channels (max power)
Bluetooth Version: 2.1 + EDR
Supported Formats: CD-DA, MP3, WMA, WAV
Tuner Sensitivity: FM 10.8 dBf, AM 25 μV
Frequency Response: 10Hz - 20kHz
Signal-to-Noise Ratio: 80 dB
Preamp Outputs: 2.2V front/rear, 2.2V subwoofer
Display: Customizable multi-color LCD
Power Requirement: 12V DC negative ground

Controls and Settings

Front Panel: POWER/VOLUME knob, SOURCE button, FUNCTION knob, USB port, AUX input.

Remote Control: POWER, VOLUME, SOURCE, TRACK UP/DOWN, PRESET, MUTE, BAND, DISP.

Audio Settings: BASS (-10 to +10), TREBLE (-10 to +10), BALANCE (L9 to R9), FADER (F9 to R9). Display: 7-color illumination, dimmer control. Bluetooth: Pairing mode, phonebook access, call history. Radio: 18 FM/6 AM presets, local/distance seek.

Connecting Devices

USB: Connect flash drives or charging cables. Bluetooth: Pair mobile devices. AUX: 3.5mm audio cable.

Turn off vehicle and receiver before connecting devices.
USB devices: Format as FAT32 for best compatibility.
Bluetooth: Enable pairing mode (hold PAIR for 3 seconds).
AUX input: Use quality audio cable for best sound.

Tip: Keep USB devices under 32GB capacity for reliable operation.

Bluetooth Operation

Supports hands-free calling and audio streaming.

Pairing: Enter pairing mode, search "KENWOOD" on mobile device.
Calling: Answer/end calls with PHONE button, use microphone for voice.
Audio streaming: Play music from paired device, control with receiver.
Phonebook: Sync contacts for voice dialing (compatible phones).
Call history: Access recent calls from receiver interface.

WARNING! Focus on driving first. Use voice commands when possible.

Audio Settings

Customize sound with equalizer and balance controls.

Bass/Treble: Adjust frequency response (-10 to +10). Balance/Fader: Control speaker output distribution. Loudness: Enhance low-volume listening. Subwoofer: Control level and phase if connected. Source Level: Adjust input sensitivity per source.

Maintenance

Keep unit clean and dry. Use soft cloth for display; avoid chemicals.

CAUTION! Do not use abrasive cleaners. Keep liquids away from unit.

Regulatory Information

FCC Part 15: Class B digital device compliant. Bluetooth qualified device. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized service centers. This device complies with part 15 of FCC Rules.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check fuse, wiring connections, and ground.
Bluetooth not connecting	Pairing mode/distance	Enter pairing mode; ensure device within range.
USB not recognized	Format/capacity	Reformat to FAT32; use smaller capacity drive.
Poor radio reception	Antenna connection	Check antenna connection; ensure proper grounding.
No sound from speakers	Settings/wiring	Check balance/fader settings; verify speaker connections.

Reset: Disconnect battery for 1 minute to reset unit.

Service: Contact authorized Kenwood service center for repairs.