Kenwood DPX530BT Manual

The Kenwood DPX530BT is a 2-DIN digital media receiver with built-in Bluetooth, USB connectivity, and AM/FM radio. Features include hands-free calling, audio streaming, front USB input, front AUX input, dual phone connection, customizable illumination, and 4-channel preamp outputs. Below are key sections for features, installation, operation, settings, and troubleshooting.

Features at a Glance

Key components: 2-DIN chassis, Bluetooth module, USB port, AUX input, AM/FM tuner, LCD display, remote control.

Installation

Remove existing stereo and prepare wiring harness.

1. Disconnect vehicle battery: Ensure safety during installation.
2. Connect wiring harness: Match colors to vehicle harness (red-ignition, yellow-battery, black-ground).
3. Connect speakers: Front and rear speaker outputs.
4. Connect antenna: Plug in vehicle antenna cable.
5. Mount unit: Secure in 2-DIN opening with mounting sleeve.

WARNING! Disconnect battery before installation to prevent electrical shorts.

First-Time Setup

Power on unit; follow initial setup procedure.

1. Set clock: Press SETUP, navigate to clock settings.
2. Pair Bluetooth: Enter pairing mode, search from phone.
3. Set radio presets: Tune to stations, press and hold preset button.
4. Adjust audio: Use audio settings for bass, treble, balance, fader.
5. Customize illumination: Select color in display settings.

CAUTION! Do not operate while driving; park vehicle for setup.

Specifications

• Power Output: 22W x 4 channels (max)
• Bluetooth Version: 3.0 + EDR
• USB Support: MP3, WMA, AAC playback
• Radio Tuner: AM/FM with RDS
• Preamp Outputs: 4-channel, 2.5V
• Display: LCD with multi-color illumination
• Power Supply: 12V DC negative ground
• Dimensions: Standard 2-DIN (180mm x 100mm)
• Operating Temp: -20°C to +60°C

Controls and Settings

Front panel controls: POWER/VOLUME knob, SOURCE, BAND, MENU/SETUP.

Remote: POWER, SOURCE, VOLUME, MUTE, PRESET, SEEK, PLAY/PAUSE.

Audio Settings: BASS, TREBLE, BALANCE, FADER, LOUDNESS. Bluetooth: PAIRING, CALL ANSWER/END, VOICE DIAL. Display: DIMMER, ILLUMINATION COLOR. Radio: MANUAL TUNING, AUTO STORE, PRESET MEMORY. USB: FOLDER UP/DOWN, REPEAT, RANDOM.

Bluetooth Connection

Pair phones for hands-free calling and audio streaming.

1. Enter pairing mode: Press SOURCE to BT, then PAIRING.
2. Search from phone: Find "KENWOOD_DPX530BT" in Bluetooth settings.
3. Enter PIN: Use "0000" if prompted.
4. Confirm connection: Unit displays "Connected".
5. Dual phone: Repeat process for second phone.

Tip: Keep phone within 3 feet during initial pairing.

USB and Media Playback

Supports USB drives with MP3, WMA, AAC files.

1. Connect USB: Insert USB device into front port.
2. Select source: Press SOURCE to USB mode.
3. Play files: Automatically plays; use arrows to navigate folders.
4. Control playback: PLAY/PAUSE, PREV/NEXT, FF/REW.
5. Repeat/Random: Press RPT or RDM for playback modes.
6. Phone charging: USB port provides 5V/1A charging.

WARNING! Do not remove USB during playback; safely eject first.

Radio Operation

AM/FM radio with 30 presets and RDS.

1. Select band: Press BAND to switch AM/FM.
2. Tune stations: Use TUNE or SEEK buttons.
3. Store presets: Tune to station, press and hold preset (1-6).
4. Recall presets: Press preset button briefly.
5. RDS: Displays station information when available.

Care & Maintenance

Use soft, dry cloth for cleaning. Avoid liquids and abrasive cleaners.

CAUTION! Do not use chemical cleaners on display; keep away from extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device compliant. Bluetooth qualified device. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Reset: Press RESET button with small pin if unit freezes.

Service: 1-800-536-9663; www.kenwood.com