Kenwood DPX792BH Manual

The Kenwood DPX792BH is a high-performance digital media receiver featuring Bluetooth connectivity, USB input, front auxiliary input, built-in amplifier (22W RMS x 4 channels), CD playback capability, customizable display colors, and advanced audio controls. Compatible with various audio formats and designed for easy installation in most vehicles. Below are key sections for features, installation, operation, settings, and troubleshooting.

1. Features at a Glance 2. Installation 3. Basic Operation 4. Specifications 5. Controls and Settings 6. Bluetooth Connectivity 7. USB and Media Playback 8. Audio Settings 9. Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital media receiver, Remote Control, Bluetooth module, USB port, Front AUX input, CD mechanism, Speaker outputs.

Feature	Description
Bluetooth connectivity	For hands-free calling and audio streaming
USB port	For connecting USB devices and charging
Front AUX input	3.5mm auxiliary input for external devices
CD playback	Plays CD, CD-R, CD-RW formats
Built-in amplifier	22W RMS x 4 channels
Display customization	Adjustable display colors and brightness
Audio controls	Bass, treble, balance, fader adjustments
Preset memory	18 FM/6 AM station presets
Steering wheel control	Compatible with steering wheel remote interfaces
Power output	MOSFET 50W x 4 channel power IC

Installation

Unpack and inspect contents. Ensure proper wiring harness connection.

Disconnect vehicle battery: Remove negative terminal for safety.
Connect wiring harness: Match colors and functions according to diagram.
Connect antenna: Attach vehicle antenna connector.
Mount unit: Secure in dashboard using appropriate mounting sleeve.
Reconnect battery and test functions.

WARNING! Disconnect battery before installation to prevent electrical shorts. Ensure all connections are secure.

Basic Operation

Power on unit; familiarize with basic controls.

Source selection: Press SOURCE button to cycle through modes (Radio, CD, USB, BT, AUX).
Volume control: Use volume knob or remote control.
Playback controls: Use appropriate buttons for each source mode.
Display adjustment: Access settings menu for display customization.

CAUTION! Do not operate while driving. Set all controls before driving.

Specifications

Power Output: 22W RMS x 4 (4 ohm)
Maximum Power: 50W x 4 channels
Frequency Response: 10Hz - 20,000Hz
Signal-to-Noise Ratio: 95dB (CD)
Bluetooth Version: 3.0 + EDR
USB Support: USB 2.0, up to 32GB
Supported Formats: MP3, WMA, AAC, WAV
Display: Dot matrix LCD with variable color
Power Requirement: 14.4V DC (11-16V allowable)
Dimensions: DIN size (178mm x 50mm)

Controls and Settings

Front Panel: POWER/VOLUME knob, SOURCE, BAND, AUDIO, TUNE/TRACK buttons.

Remote: POWER, Numeric buttons, SOURCE, VOLUME, MUTE, PRESET, AUDIO, DISP.

Audio Settings: BASS, TREBLE, BALANCE, FADER, LOUDNESS, SUBWOOFER control. Display: Color settings (256 colors), Dimmer, Display mode. System: Clock setting, Beep tone, Reset function. Bluetooth: Pairing, Phonebook access, Call history.

Bluetooth Connectivity

Hands-free calling and audio streaming capability.

Enable pairing mode: Press SOURCE to BT mode, access BT pairing in menu.
Search from device: Find "KENWOOD" in your phone's Bluetooth settings.
Complete pairing: Enter PIN if required (default: 0000).
Manage connections: Access phonebook, call history through unit controls.

Tip: Keep phone within 3 feet for optimal Bluetooth performance.

USB and Media Playback

Supports USB devices with MP3, WMA, AAC, WAV files.

Connect USB: Insert USB device into front USB port.
Select source: Press SOURCE to USB mode.
Navigate files: Use TUNE/TRACK buttons to browse folders and tracks.
Play modes: Repeat, Random, Scan functions available.
CD playback: Insert CD, unit automatically begins playback.
Track selection: Use numeric buttons or seek controls.

WARNING! Do not remove USB device during playback. Eject properly through menu.

Audio Settings

Advanced audio customization for optimal sound quality.

Setting	Function	Range
Bass	Low frequency adjustment	-7 to +7
Treble	High frequency adjustment	-7 to +7
Balance	Left/Right speaker balance	L10 to R10
Fader	Front/Rear speaker balance	F10 to R10
Loudness	Bass boost at low volumes	On/Off
Subwoofer	External subwoofer control	On/Off, Level

Maintenance

Keep unit clean and free from moisture. Use soft, dry cloth for cleaning.

CAUTION! Do not use chemicals or abrasive cleaners. Avoid extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. This device complies with part 15 of the FCC Rules. Copyright © Kenwood Corporation. Bluetooth is a registered trademark of Bluetooth SIG, Inc. For support, visit www.kenwood.com or contact authorized Kenwood service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check power connections; verify fuse; ensure proper ground.
Bluetooth not connecting	Pairing mode/distance	Enter pairing mode; ensure device within range; delete old pairing.
USB not recognized	Format/compatibility	Use FAT32 format; check file compatibility; try different USB device.
No sound from speakers	Wiring/settings	Verify speaker connections; check balance/fader settings; test each channel.
CD not playing	Disc/mechanism	Ensure disc is clean and compatible; check for mechanism obstruction.
Poor radio reception	Antenna/connection	Verify antenna connection; check for interference sources; reposition antenna.

Reset: Hold SOURCE button while turning power on to reset unit.

Service: Contact authorized Kenwood service center; www.kenwood.com