Kenwood DSP 100 Manual

The Kenwood DSP 100 is a high-performance digital signal processor designed for audio enhancement and customization. Featuring advanced DSP technology, multiple audio presets, customizable EQ settings, digital inputs/outputs, and user-friendly controls. Compatible with various audio systems and designed for both home and professional use. Below are key sections for features, installation, setup, operation, specifications, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Processing Modes 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital Signal Processor, Remote Control, Multiple audio inputs/outputs, LCD display, Preset buttons, Power connector.

Feature	Description
Digital Inputs	Optical and coaxial digital audio inputs
Analog Inputs	RCA stereo inputs for analog sources
Digital Outputs	Optical and coaxial digital audio outputs
LCD Display	Shows current settings and mode
Power Connector	For AC power connection
Remote Sensor	Infrared receiver for remote control
PRESET Buttons	Quick access to saved audio profiles
MENU Button	Accesses setup and configuration menus
MUTE	Mutes audio output
POWER	Turns unit on/off

Installation

Unpack and inspect contents. Place on stable surface near audio system.

Connect audio sources: Use digital or analog inputs for audio sources.
Connect to amplifier: Use outputs to connect to your amplifier or receiver.
Connect power: Plug into AC power outlet.
Position remote sensor: Ensure clear line of sight for remote control.

WARNING! Ensure proper ventilation; do not block ventilation openings. Use stable power source.

First-Time Setup

Power on unit; follow initial setup procedure.

Select input source: Press INPUT to cycle through available sources.
Configure audio settings: Use MENU to access EQ and processing settings.
Save presets: Configure and save up to 6 custom audio profiles.
Set display preferences: Adjust brightness and timeout settings.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Processor: 24-bit Digital Signal Processor
Sample Rates: 32kHz, 44.1kHz, 48kHz, 96kHz
Inputs: Optical, Coaxial, Analog RCA
Outputs: Optical, Coaxial, Analog RCA
Frequency Response: 20Hz - 20kHz (±0.5dB)
Signal-to-Noise Ratio: >110dB
Total Harmonic Distortion: <0.005%
Power Consumption: 15W maximum
Operating Voltage: 100-240V AC, 50/60Hz
Dimensions: 210mm (W) x 55mm (H) x 210mm (D)

Controls and Settings

Access menu system via MENU button. Front Panel: POWER, PRESET buttons, MENU, INPUT SELECT.

Remote: POWER, PRESET buttons, MENU, INPUT, VOLUME, MUTE, NAVIGATION arrows, ENTER.

Audio Settings: Equalizer (Flat, Rock, Jazz, Classical, Custom), Bass Management, Crossover Settings, Time Alignment. System Settings: Display Brightness, Auto Standby, Input Priority, Factory Reset.

Connecting Devices

Digital Sources: Optical/coaxial inputs. Analog Sources: RCA inputs. Output to amplifier/receiver.

Turn off all devices before connecting.
Match cable types to appropriate ports.
Select input source via INPUT button.
Ensure proper digital handshake for digital connections.

Tip: Use high-quality cables for optimal audio performance.

Audio Processing Modes

Supports various audio enhancement and customization features.

Equalizer Presets: Select from predefined EQ curves or create custom.
Bass Management: Adjust crossover frequencies and slopes.
Time Alignment: Delay settings for speaker synchronization.
Dynamic Range Control: Compress dynamic range for night listening.
Surround Simulation: Create virtual surround sound from stereo sources.
Loudness Compensation: Automatic bass/treble boost at low volumes.

WARNING! Avoid extreme EQ settings that may damage speakers.

Advanced Features

Custom Preset Memory: Save up to 6 complete configuration setups. Auto Source Detection: Automatically switches to active input source. Display Dimming: Adjustable display brightness with auto-off timer.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; avoid liquids and chemical cleaners.

CAUTION! Do not use abrasive cleaners; keep away from moisture and extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European compliance. Copyright © 2025 Kenwood Corporation. All trademarks property of their respective owners. For technical support, visit www.kenwood.com or contact 1-800-KENWOOD.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No audio output	Input selection/connections	Check input source selection; verify all connections; ensure power is on.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear line of sight to IR sensor.
Distorted audio	Signal levels/settings	Check input signal levels; reset EQ to flat; verify source quality.
No display	Power/display settings	Check power connection; adjust display brightness settings.
Presets not saving	Memory/operation	Ensure proper save procedure; perform factory reset if needed.

Reset: Menu > System > Factory Reset to restore default settings.

Service: 1-800-KENWOOD; www.kenwood.com