kenwood electronic heater ew6708k manual

The Kenwood Electronic Heater EW6708K is a 1500W portable electric heater with adjustable thermostat, multiple heat settings, safety tip-over switch, overheat protection, cool-touch housing, built-in carry handle, and energy-saving features. Designed for indoor residential use with 120V AC power supply. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Precautions 3. Installation & Setup 4. Specifications 5. Controls and Operation 6. Maintenance & Cleaning 7. Storage Instructions 8. Safety Features 9. Energy Saving Tips 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Heating element, adjustable thermostat, safety tip-over switch, overheat protection, carry handle, power indicator light.

FeatureDescription
Power SettingsHigh (1500W), Low (750W), Fan Only
Thermostat ControlAdjustable temperature setting
Safety Tip-Over SwitchAutomatically turns off if unit tips over
Overheat ProtectionAutomatic shut-off if overheating detected
Cool-Touch HousingSafe exterior surface temperature
Carry HandleBuilt-in handle for easy portability
Power Indicator LightShows when unit is powered on
OscillationWide-area heat distribution (if applicable)
Timer FunctionAutomatic shut-off timer (if applicable)
Remote ControlWireless remote operation (if applicable)

Safety Precautions

Important safety instructions for proper operation and accident prevention.

  1. Keep combustible materials at least 3 feet from front, sides, and rear of heater
  2. Do not use in bathrooms, laundry areas, or other high-moisture locations
  3. Never operate heater with damaged cord or plug
  4. Do not run cord under carpeting or cover with rugs
  5. Always plug directly into wall outlet - do not use extension cords
  6. Supervise children and pets when heater is in use
  7. Unplug heater when not in use

WARNING! Risk of fire or electric shock. Do not cover heater or block air vents.

Installation & Setup

Proper placement and initial setup for optimal performance.

  1. Choose location: Place on level, stable surface away from foot traffic
  2. Clear area: Ensure minimum 3-foot clearance from walls and furniture
  3. Power connection: Plug directly into 120V grounded wall outlet
  4. Initial test: Turn on to verify proper operation and safety features
  5. Thermostat setting: Start at medium setting and adjust as needed

CAUTION! Ensure heater is on stable surface and cannot be tipped over easily.

Specifications

Controls and Operation

Understanding heater controls and proper operating procedures.

Control Panel: Power switch, Heat settings (High/Low/Fan), Thermostat dial, Power indicator light.

Operation: Turn power switch to desired setting. Adjust thermostat to preferred temperature. Heater will cycle on/off automatically to maintain set temperature. For fan-only operation, use fan setting without heat.

Energy Saving: Use lower heat setting for maintaining temperature rather than heating cold rooms. Set thermostat to comfortable but not excessive temperature.

Maintenance & Cleaning

Regular maintenance for optimal performance and safety.

  1. Unplug heater and allow to cool completely before cleaning
  2. Wipe exterior with soft, dry cloth - do not use liquids or sprays
  3. Clean air intake and outlet vents with soft brush or vacuum attachment
  4. Check power cord regularly for damage
  5. Store in dry location when not in use for extended periods

CAUTION! Never immerse heater in water or use abrasive cleaners.

Storage Instructions

Proper storage procedures for extended non-use periods.

  1. Unplug heater and allow to cool completely
  2. Clean according to maintenance instructions
  3. Store in original packaging if available
  4. Keep in dry, temperature-stable location
  5. Protect from dust and moisture
  6. Do not place heavy objects on stored heater

Tip: Coil power cord loosely for storage to prevent damage.

Safety Features

Built-in safety mechanisms for protection.

FeatureFunction
Tip-Over SwitchAutomatically cuts power if heater is knocked over
Overheat ProtectionShuts off heating element if internal temperature exceeds safe limits
Cool-Touch HousingExterior remains safe to touch during operation
Stable BaseWide footprint reduces tipping risk
Automatic ThermostatPrevents overheating by cycling on/off

Energy Saving Tips

Maximize efficiency and reduce energy consumption.

  1. Use only in occupied rooms - turn off when leaving
  2. Set thermostat to lowest comfortable temperature
  3. Use lower heat setting for maintaining warmth
  4. Close doors and windows in heated area
  5. Use in conjunction with home's central heating for spot heating
  6. Clean air vents regularly for optimal airflow

Note: Heater draws 12.5 amps on high setting - avoid using with other high-wattage appliances on same circuit.

Regulatory Information

UL certification: Meets UL Standard 1278 for movable electric heaters. FCC Compliance: Class B digital device. Copyright © Kenwood. For support, visit www.kenwood.com or contact customer service at 1-800-KENWOOD.

Troubleshooting

SymptomPossible CauseCorrective Action
Heater won't turn onPower source/switchCheck wall outlet; ensure power switch is on; check circuit breaker.
No heat outputSettings/thermostatVerify heat setting selected; adjust thermostat higher; allow time to warm up.
Heater shuts off unexpectedlyOverheating/tip-overCheck for blocked vents; ensure unit is upright; allow to cool and restart.
Unusual odorsDust accumulationNormal during first use; clean air vents if persistent.
Poor heating performanceRoom size/placementUse in appropriately sized room; ensure proper clearance around unit.

Reset: Unplug for 10 minutes, then restart if safety features activate.

Service: 1-800-KENWOOD; www.kenwood.com

kenwood electronic heater ew6708k manual © - All Rights Reserved 2025