Kenwood Excelon KDC X700 Manual

The Kenwood Excelon KDC X700 is a high-performance car audio receiver featuring Bluetooth connectivity, USB input, CD playback, AM/FM tuner, advanced audio controls, and compatibility with various audio formats. With 50W x 4 channels, built-in amplifier, and customizable sound settings, it delivers exceptional audio quality for your vehicle. Below are key sections covering features, installation, operation, settings, and troubleshooting.

1. Features at a Glance 2. Installation 3. Basic Operation 4. Specifications 5. Controls and Settings 6. Bluetooth Connectivity 7. USB and Media Playback 8. Audio Settings 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit, Remote Control, Wiring harness, Installation accessories, User manual.

Feature	Description
Bluetooth connectivity	For hands-free calling and audio streaming
USB input	For connecting USB devices and charging
CD playback	Supports CD, CD-R, CD-RW formats
AM/FM tuner	With 18 FM and 6 AM presets
Power output	50W x 4 channels (max)
Audio inputs	RCA preamp outputs for external amplification
Display	Customizable multi-color LCD display
EQ settings	Built-in equalizer with multiple presets
Steering wheel control	Compatible with steering wheel remote interfaces
Security features	Detachable faceplate for theft prevention

Installation

Proper installation ensures optimal performance and safety.

Disconnect negative battery terminal before installation.
Connect wiring harness following color-coded wires matching vehicle wiring.
Mount unit securely in dashboard using supplied installation kit.
Connect antenna cable and all audio inputs/outputs.
Reconnect battery and test all functions before final assembly.

WARNING! Always disconnect vehicle battery before installation to prevent electrical shorts or damage.

Basic Operation

Power on unit and familiarize yourself with basic controls.

Source selection: Press SOURCE button to cycle through available sources (Radio, CD, USB, Bluetooth).
Volume control: Use volume knob or remote control buttons.
Playback controls: Use transport buttons (Play, Pause, Skip, Search) for media playback.
Display settings: Adjust display brightness and color in settings menu.
Detach faceplate: Press release button and slide faceplate off for security.

CAUTION! Do not operate controls while driving if it distracts from safe driving.

Specifications

Power Output: 50W x 4 channels (Max)
RMS Power: 22W x 4 channels
Frequency Response: 10Hz - 22kHz
Signal-to-Noise Ratio: 95dB (CD)
Preset Stations: 18 FM, 6 AM
Bluetooth Version: 3.0 + EDR
Supported Formats: MP3, WMA, AAC, WAV
Display: Multi-color LCD with customizable colors
Power Requirement: 12V DC, negative ground
Dimensions: Standard DIN size (7" x 2")

Controls and Settings

Access settings via FUNCTION button and navigation controls.

Front Panel: Power/Volume knob, SOURCE, FUNCTION, EJECT, Transport controls.

Remote: Power, Volume, Source selection, Transport controls, Menu navigation.

Audio Settings: EQ presets (Pop, Rock, Jazz, Classic, User), Bass/Mid/Treble adjustment, Loudness, Fader/Balance. Display: Brightness, Color settings, Dimmer. System: Bluetooth settings, Clock, Beep tones, Reset functions.

Bluetooth Connectivity

Pair mobile devices for hands-free calling and audio streaming.

Enable Bluetooth on your mobile device.
Press SOURCE to select Bluetooth mode.
Enter pairing code if required (default: 0000).
Accept pairing on both devices.

Tip: For optimal performance, keep mobile device within 3 feet of the unit during initial pairing.

USB and Media Playback

Supports USB devices with MP3, WMA, AAC, and WAV files.

Connect USB device to USB port on front panel.
Press SOURCE to select USB mode.
Navigate folders using navigation buttons.
Play/Pause/Skip using transport controls.
Repeat/Shuffle modes available in function menu.
Fast forward/rewind by holding skip buttons.

WARNING! Do not remove USB device during playback to prevent data corruption.

Audio Settings

Customize sound to match your preferences and vehicle acoustics.

Equalizer Presets: Pop, Rock, Jazz, Classic, User customizable. Bass/Treble: Adjustable ±10 levels. Loudness: Enhances low and high frequencies at low volumes. Fader/Balance: Adjust front/rear and left/right speaker balance. Subwoofer Control: Adjustable level and phase for external subwoofer.

Care & Maintenance

Keep unit clean and protected for optimal performance and longevity.

Use soft, dry cloth for cleaning display and controls. Avoid chemical cleaners. Store detachable faceplate in protective case when not in use. Keep unit dry and avoid extreme temperatures.

CAUTION! Do not use abrasive materials or liquids for cleaning.

Regulatory Information

FCC Part 15: Class B digital device compliant. This device complies with part 15 of FCC rules. Copyright © Kenwood Corporation. Bluetooth word mark and logos are registered trademarks. For technical support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/connections	Check fuse, wiring connections, and battery connection.
No sound	Settings/speakers	Check volume, mute setting, speaker connections, fader balance.
Bluetooth not connecting	Pairing/device	Delete old pairing, restart both devices, ensure Bluetooth enabled.
USB not recognized	Format/compatibility	Check file format compatibility, try different USB device, format to FAT32.
Poor radio reception	Antenna/connection	Ensure antenna fully extended and properly connected.

Reset: Hold SOURCE and FUNCTION buttons simultaneously for 5 seconds to reset unit.

Service: 1-800-536-9663; www.kenwood.com