Kenwood Excelon KDC X701 Manual

The Kenwood Excelon KDC X701 is a high-performance car stereo receiver featuring Bluetooth connectivity, USB input, CD playback, AM/FM tuner, advanced audio controls, customizable display colors, remote control compatibility, and extensive audio customization options. Below are key sections for features, installation, operation, settings, and troubleshooting.

1. Features at a Glance 2. Installation 3. Basic Operation 4. Specifications 5. Controls and Settings 6. Bluetooth Connectivity 7. Audio Settings 8. Display Customization 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit, Remote Control, Wiring harness, USB cable, Bluetooth module, Installation accessories.

Feature	Description
Bluetooth Connectivity	Wireless audio streaming and hands-free calling
USB Input	For connecting USB devices and charging
CD Playback	Supports CD-DA, CD-R, CD-RW formats
AM/FM Tuner	30 station presets (18 FM, 12 AM)
Audio Controls	13-band equalizer, crossover, time alignment
Display Customization	Multiple color options and brightness levels
Remote Control	Full function remote included
Power Output	50W x 4 channels maximum
Preamp Outputs	3 sets (front, rear, subwoofer)
Source Controls	SOURCE button cycles through input options

Installation

Unpack and inspect all components before installation.

Disconnect vehicle battery negative terminal for safety.
Remove factory radio using appropriate removal tools.
Connect wiring harness following color-coded wiring diagram.
Secure unit in dashboard using mounting sleeve and brackets.
Reconnect battery and test all functions.

WARNING! Always disconnect battery before installation to prevent electrical shorts. Ensure proper grounding.

Basic Operation

Power on unit; familiarize with basic controls.

Source Selection: Press SOURCE button to cycle through available inputs.
Volume Control: Turn VOLUME knob or use remote control buttons.
Bluetooth Pairing: Access BT SETUP menu to pair mobile devices.
USB Playback: Connect USB device for music playback and charging.
CD Operation: Insert CD for automatic playback.

CAUTION! Do not operate while driving. Set all controls before driving.

Specifications

Power Output: 50W x 4 (Max), 22W x 4 (RMS)
Preamp Outputs: 3 sets (5V)
Frequency Response: 10Hz - 22kHz
Signal-to-Noise Ratio: 105dB
Supported Formats: MP3, WMA, AAC, WAV
Bluetooth Version: 3.0 + EDR
Display: Dot matrix LCD with customizable colors
Dimensions: DIN size (7" x 2")
Operating Voltage: 14.4V DC (11-16V range)

Controls and Settings

Access settings via FUNCTION button and rotary encoder.

Front Panel: POWER/VOLUME knob, SOURCE, FUNCTION, EJECT, USB port, AUX input.

Remote: POWER, VOLUME, SOURCE, MUTE, BAND, PRESET, PLAY/PAUSE, TRACK controls.

Audio Settings: 13-band equalizer, bass boost, loudness, fader, balance. Source Settings: Bluetooth pairing, USB mode, CD repeat/shuffle. System Settings: Display color, dimmer, beep tones, reset options.

Bluetooth Connectivity

Wireless audio streaming and hands-free calling capabilities.

Enter BT SETUP from function menu.
Select "Pairing" to make unit discoverable.
Search for "KDC-X701" on your mobile device.
Enter PIN "0000" if prompted.
Confirm pairing on both devices.

Tip: Keep mobile device within 3 feet for optimal Bluetooth performance.

Audio Settings

Advanced audio customization for optimal sound quality.

Equalizer: 13-band graphic EQ with customizable presets.
Crossover: High-pass and low-pass filter settings.
Time Alignment: Adjust speaker delay for optimal staging.
Loudness: Automatic bass enhancement at low volumes.
Balance/Fader: Adjust sound distribution between speakers.
Subwoofer Level: Independent subwoofer volume control.

Note: Save settings by pressing FUNCTION button for 2 seconds.

Display Customization

Personalize display appearance to match vehicle interior.

Color Options: 16 different display colors available. Brightness: 3 levels plus auto-dimmer. Screen Saver: Clock display when no audio playing. Button Illumination: Matches display color selection.

Care & Maintenance

Keep unit clean and protected from extreme conditions.

Use soft, dry cloth for cleaning display and controls. Avoid chemical cleaners. Keep CDs and USB devices clean and free from scratches. Store remote control in safe location when not in use.

CAUTION! Do not use liquids or aerosols near unit. Avoid extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device compliant. Bluetooth qualified device. Copyright © Kenwood Corporation. All trademarks property of their respective owners. For support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/ fuse	Check fuse and wiring connections; verify battery connection.
Bluetooth not connecting	Pairing mode/distance	Ensure unit in pairing mode; move device closer; delete old pairing.
CD not playing	Disc format/damage	Check disc format compatibility; clean disc; ensure proper insertion.
USB not recognized	Format/compatibility	Use FAT32 formatted devices; check file format compatibility.
Poor radio reception	Antenna connection	Ensure antenna fully connected; check antenna condition.

Reset: Hold FUNCTION + SOURCE for 5 seconds to factory reset.

Service: 1-800-536-9663; www.kenwood.com