Kenwood Excelon KDC X995 Owners Manual

The Kenwood Excelon KDC X995 is a high-performance car audio receiver featuring advanced digital media playback, Bluetooth connectivity, HD Radio tuner, SiriusXM compatibility, 3 preamp outputs (4V), 13-band EQ, time alignment, customizable display colors, and USB/iPod/iPhone connectivity. Below are key sections for features, installation, operation, settings, and troubleshooting.

1. Features at a Glance 2. Installation 3. Basic Operation 4. Specifications 5. Controls and Settings 6. Bluetooth Connectivity 7. Audio Settings 8. Source Operations 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital media receiver, Remote Control, Bluetooth module, USB port, AUX input, Preamp outputs, HD Radio tuner.

Feature	Description
Bluetooth	Wireless audio streaming and hands-free calling
USB Port	For iPod/iPhone connectivity and USB storage
HD Radio	Digital radio reception with multicasting
3 Preamp Outputs	4V front, rear, subwoofer outputs
13-band EQ	Advanced equalizer with preset and custom modes
Time Alignment	Precise audio timing adjustment
SiriusXM Ready	Satellite radio compatibility
Customizable Display	Multiple color options and display modes
AUX Input	3.5mm auxiliary input for external devices
Steering Wheel Control	Compatible with most steering wheel interfaces

Installation

Unpack and inspect contents. Verify vehicle compatibility.

Disconnect vehicle battery: Remove negative terminal for safety.
Remove factory radio: Use appropriate removal tools for your vehicle.
Connect wiring harness: Match wire colors and functions carefully.
Connect antenna and accessories: Bluetooth, USB, AUX inputs.
Test functions: Reconnect battery and verify operation before final installation.
Secure unit: Mount in dash and replace trim panels.

WARNING! Always disconnect battery before installation. Ensure proper grounding.

Basic Operation

Power on unit; familiarize with control layout.

Source selection: Press SOURCE to cycle through available sources.
Volume control: Use VOL knob or remote control buttons.
Playback controls: PLAY/PAUSE, SKIP, SCAN for media playback.
Menu access: Press FUNCTION for advanced settings.
Bluetooth pairing: Initiate from BT AUDIO source menu.

CAUTION! Adjust settings only when vehicle is parked.

Specifications

Power Output: 22W RMS x 4 channels (4 ohm)
Preamp Outputs: 3 pairs (4V front, rear, subwoofer)
EQ: 13-band graphic equalizer
Bluetooth: Version 3.0 + EDR
USB: 2.0 compatible, iPod/iPhone direct control
Tuner: FM/AM with HD Radio capability
Display: Customizable multi-color LCD
Dimensions: DIN size (7" x 2")
Operating Voltage: 12V DC (negative ground)

Controls and Settings

Front Panel: SOURCE, VOL knob, FUNCTION, USB port, AUX input.

Remote: POWER, SOURCE, VOLUME, MUTE, PLAY/PAUSE, SKIP, MENU, numeric buttons.

Audio Settings: 13-band EQ presets (POP, ROCK, JAZZ, etc.), bass/treble, loudness, subwoofer level. Source Settings: Bluetooth pairing, USB mode, AUX input level. System Settings: Display color, button illumination, clock, language, reset options.

Bluetooth Connectivity

Supports audio streaming and hands-free calling.

Enter pairing mode: Select BT AUDIO source, press FUNCTION.
Search from device: Enable Bluetooth on mobile device.
Select "KDC-X995": From available devices list.
Enter PIN if required: Default is "0000".
Confirm connection: Unit will display connected device name.

Tip: Keep mobile device within 3 feet for initial pairing.

Audio Settings

Advanced audio customization for optimal sound quality.

EQ Presets: Select from POP, ROCK, JAZZ, CLASSICAL, FLAT.
Custom EQ: Adjust 13 frequency bands individually.
Time Alignment: Set speaker distances for optimal imaging.
Crossover Settings: High-pass/low-pass filters for speakers/subwoofer.
Loudness: Automatic bass boost at low volumes.
Subwoofer Level: Independent subwoofer volume control.

WARNING! Make audio adjustments only when vehicle is parked.

Source Operations

Multiple source options for various media types.

Radio: AM/FM/HD Radio tuning with presets.
USB: Connect USB storage for MP3/WMA playback.
iPod/iPhone: Direct control and charging via USB.
Bluetooth Audio: Wireless streaming from compatible devices.
AUX Input: 3.5mm jack for external audio sources.
SiriusXM: Satellite radio with tuner module (sold separately).

Tip: Use SCAN function to quickly browse stations or tracks.

Care & Maintenance

Use soft, dry cloth for cleaning. Avoid chemical cleaners.

CAUTION! Do not use abrasive materials. Keep liquids away from unit.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/connections	Check fuse, battery connection, ground wire.
Bluetooth not connecting	Pairing mode/distance	Enter pairing mode; ensure device within range; delete old pairings.
USB not recognized	Format/compatibility	Use FAT32 format; check device compatibility; try different cable.
Poor radio reception	Antenna connection	Ensure antenna fully connected; check antenna amplifier power.
No sound from speakers	Settings/wiring	Check speaker wires; verify audio settings; test different sources.

Reset: Hold FUNCTION + SOURCE for 5 seconds to factory reset.

Service: 1-800-536-9663; www.kenwood.com