Kenwood HC 10 Manual

The Kenwood HC 10 is a compact food processor designed for home use, featuring a powerful motor, multiple speed settings, various attachments for slicing, shredding, and mixing, safety lock mechanism, pulse function, durable plastic bowl with lid, and easy-to-clean components. Powered by 230V AC, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Motor base with control panel, Processing bowl with lid, Slicing disc, Shredding disc, Plastic dough blade, Pusher, Spatula.

Feature	Description
Motor base	Houses motor and control buttons
Processing bowl	1.5L capacity with measurement markings
Slicing disc	For slicing vegetables and fruits
Shredding disc	For shredding cheese and vegetables
Dough blade	For kneading bread and pizza dough
Pusher	For safely guiding food into feed tube
POWER button	Turns processor on/off
PULSE button	For short bursts of power
Speed selector	Low/High speed settings
Safety lock	Prevents operation unless properly assembled

Installation

Unpack and inspect all components. Place on clean, dry, stable surface.

1. Assemble bowl: Place bowl on motor base, align locking tabs.
2. Install blade/disc: Select appropriate attachment, place on center shaft.
3. Secure lid: Place lid on bowl, rotate clockwise until click.
4. Plug into AC power outlet.

WARNING! Ensure all parts are completely dry before assembly. Do not operate with wet hands.

First-Time Setup

Before first use, clean all components thoroughly.

1. Wash removable parts: Bowl, lid, blades, discs in warm soapy water.
2. Dry completely: Ensure no moisture remains.
3. Test operation: Assemble without food, run for 30 seconds.
4. Familiarize with controls: Practice with pulse and speed settings.

CAUTION! Never insert fingers or utensils while processor is running.

Specifications

• Capacity: 1.5 liter processing bowl.
• Motor Power: 500W peak power.
• Speed Settings: Low, High, Pulse.
• Attachments: Slicing disc, shredding disc, dough blade.
• Safety Features: Safety lock, overload protection.
• Materials: BPA-free plastic bowl, stainless steel blades.
• Power Source: 230V AC, 50Hz.
• Dimensions: Compact design for easy storage.

Controls and Settings

Control panel located on motor base. Buttons: POWER, PULSE, Speed selector (Low/High).

Operation: Ensure safety lock engaged before use. Select speed setting based on food type. Use PULSE for controlled processing.

Speed Guide: LOW for delicate foods, HIGH for tough ingredients. PULSE for chopping or when precise control needed.

Using Attachments

Select appropriate attachment for desired food preparation.

1. Slicing disc: For uniform slices of vegetables, fruits.
2. Shredding disc: For shredding cheese, carrots, cabbage.
3. Dough blade: For kneading bread dough up to 500g flour.
4. Assembly: Always ensure proper alignment before operation.

Tip: Cut food into chunks that fit feed tube for best results.

Food Processing Tips

For optimal results with different food types.

1. Vegetables: Use slicing disc for uniform slices; pulse for chopping.
2. Cheese: Chill before shredding for cleaner results.
3. Dough: Do not exceed 500g flour capacity.
4. Nuts: Pulse briefly to avoid turning into paste.
5. Herbs: Use pulse function for fine chopping.
6. Meat: Cut into cubes, use pulse for grinding.

WARNING! Never process hot foods; allow to cool first.

Safety Features

Safety lock: Processor only operates when properly assembled. Overload protection: Motor shuts off if overloaded; wait 15 minutes before resuming.

Care & Cleaning

Unplug before cleaning. Wash removable parts in warm soapy water. Wipe motor base with damp cloth.

CAUTION! Do not immerse motor base in water. Dry all parts thoroughly before storage.

Regulatory Information

CE certified: Complies with European safety standards. Copyright © 2023 Kenwood; trademarks of Kenwood Limited. For support, visit www.kenwoodworld.com or contact customer service at +44 (0) 23 9245 9000.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Motor won't start	Safety lock not engaged	Ensure bowl and lid properly locked in place.
Poor processing results	Wrong speed setting	Use appropriate speed for food type; try pulse function.
Motor stops during use	Overload protection activated	Reduce quantity; wait 15 minutes before restarting.
Uneven slicing/shredding	Food not properly prepared	Cut food to fit feed tube; use pusher evenly.
Unusual noise	Foreign object or improper assembly	Stop immediately; check for obstructions; reassemble properly.

Reset: Unplug for 15 minutes if overload protection activated.

Service: +44 (0) 23 9245 9000; www.kenwoodworld.com