Kenwood Hi Fi User Manuals

Kenwood Hi Fi systems are renowned for their superior audio quality, advanced features, and reliable performance. These systems typically include amplifiers, CD players, cassette decks, tuners, and speakers, offering comprehensive audio solutions for home entertainment. Below are key sections covering safety guidelines, system features, installation procedures, operation instructions, maintenance tips, and troubleshooting assistance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Audio Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Amplifier unit, CD player, Cassette deck, Tuner, Remote control, Speaker terminals, Audio input/output jacks.

Feature	Description
Amplifier	High-power output with multiple audio inputs
CD Player	Supports CD, CD-R, CD-RW playback
Cassette Deck	Record and playback functionality with auto-reverse
Tuner	AM/FM radio with preset stations
Remote Control	Full system control from distance
Speaker Terminals	For connecting left and right speakers
Audio Inputs	AUX, Phono, Tape inputs for external devices
Audio Outputs	Record outputs, headphone jack
Bass/Treble Controls	Adjustable audio equalization
Loudness	Enhanced bass at low volumes

Installation

Unpack and inspect all components. Place main unit on stable, level surface.

Connect speakers: Match polarity (+ to +, - to -) using speaker wires.
Connect antenna: Attach FM wire antenna and AM loop antenna.
Connect power: Plug AC power cord into wall outlet.
Connect audio sources: Use appropriate cables for CD player, tape deck, etc.

WARNING! Ensure proper ventilation around unit. Do not block ventilation openings.

First-Time Setup

Power on system; initialize settings for optimal performance.

Set clock: Use CLOCK button and numeric keys to set current time.
Tune radio stations: Use auto-tune or manual tuning to preset favorite stations.
Adjust audio settings: Set bass, treble, balance, and loudness to preference.
Test all functions: Verify CD playback, tape operation, and radio reception.

CAUTION! Keep magnets away from speakers and cassette deck.

Specifications

Power Output: 50W per channel (RMS)
Frequency Response: 20Hz - 20kHz
Signal-to-Noise Ratio: >80dB
Total Harmonic Distortion: <0.08%
Input Sensitivity: Phono: 2.5mV, AUX: 150mV
Speaker Impedance: 8 ohms
Power Requirements: 120V AC, 60Hz
Dimensions: Main unit: 430mm x 150mm x 330mm
Weight: Approx. 8.5kg

Controls and Settings

Front panel controls: POWER, VOLUME, BASS, TREBLE, BALANCE, INPUT SELECTOR, TUNING, FUNCTION buttons.

Remote: POWER, VOLUME, MUTE, INPUT SELECT, PLAY/PAUSE, STOP, SKIP, TUNING, PRESET, DISPLAY.

Audio Controls: Bass (±10dB), Treble (±10dB), Balance (L/R), Loudness (On/Off). Input Selection: CD, TUNER, TAPE, PHONO, AUX. Tuner: Manual/Auto tuning, Preset memory (30 stations). Display: Clock, Station frequency, Track number, Play mode.

Connecting Devices

Multiple input options for various audio sources.

Turntable: Connect to PHONO inputs using RCA cables.
CD Player: Use AUX or CD inputs with stereo audio cables.
Tape Deck: Connect to TAPE IN/OUT for recording/playback.
Headphones: Plug into front panel headphone jack.

Tip: Use high-quality cables for best audio performance.

Playing Media

Supports CDs, cassettes, and radio playback.

CD Playback: Insert CD, press PLAY; use SKIP for track selection.
Cassette Playback: Insert tape, press PLAY; AUTO REVERSE for continuous play.
Radio: Select TUNER, choose AM/FM, tune to desired station.
Recording: Connect source to TAPE IN, insert blank tape, press RECORD+PLAY.
Repeat: REPEAT function for continuous track/disk play.
Random: RANDOM play for shuffled track order.
Program: PROGRAM mode for custom play sequence.

WARNING! Do not touch laser lens in CD player. Keep cassettes away from heat.

Audio Features

Equalizer: Bass and treble controls for audio customization. Loudness: Enhances bass at low volume levels. Balance: Adjusts left/right speaker balance. Source Direct: Bypasses tone controls for pure audio signal.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Clean cassette heads with cleaning cassette periodically.

CAUTION! Do not use solvents or abrasive cleaners. Keep away from moisture.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European standards. Copyright © Kenwood Corporation. All trademarks property of Kenwood. For technical support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; try different outlet; check fuse.
No sound	Volume/speakers	Increase volume; check speaker connections; verify input selection.
CD won't play	Disc/dirty lens	Check disc for damage; clean lens with cleaning disc; ensure disc inserted properly.
Poor radio reception	Antenna/position	Extend FM antenna; reposition AM antenna; check connections.
Tape won't play	Tape/dirty heads	Ensure tape inserted correctly; clean tape heads; check tape condition.

Reset: Disconnect power for 30 seconds then reconnect.

Service: 1-800-536-9663; www.kenwood.com