Kenwood Home Stereo Manual

The Kenwood Home Stereo System is a high-performance audio system featuring AM/FM tuner, CD player, cassette deck, auxiliary inputs, remote control, equalizer settings, speaker outputs, and various audio enhancement features. Designed for home entertainment with powerful sound output and multiple connectivity options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main stereo unit, Remote Control, Speaker terminals, CD player, Cassette deck, AM/FM tuner, Auxiliary inputs, Headphone jack.

Installation

Unpack and inspect all components. Place on stable, level surface.

1. Connect speakers: Attach speaker wires to correct terminals (red to red, black to black).
2. Connect antenna: Attach AM loop antenna and FM wire antenna.
3. Connect power: Plug AC power cord into wall outlet.
4. Connect auxiliary devices: Use AUX input for external audio sources.

WARNING! Ensure proper ventilation around unit. Do not place near heat sources.

First-Time Setup

Power on system; initialize settings.

1. Set clock: Press CLOCK button and set current time.
2. Program radio stations: Use auto-scan to find and store stations.
3. Adjust audio settings: Set bass, treble, and balance to preference.
4. Test all functions: Verify CD, cassette, and radio operation.

CAUTION! Keep speakers away from moisture and extreme temperatures.

Specifications

• Power Output: 50W per channel (RMS)
• Frequency Response: 20Hz - 20kHz
• Signal-to-Noise Ratio: >80dB
• Inputs: CD, Cassette, Aux, AM/FM
• Outputs: Speaker terminals, headphone jack
• CD Compatibility: CD, CD-R, CD-RW
• Power Requirements: 120V AC, 60Hz
• Dimensions: Standard stereo component size

Controls and Settings

Front panel controls: POWER, VOLUME, SOURCE SELECT, BASS, TREBLE, BALANCE.

Remote: POWER, Numeric buttons, PLAY/PAUSE, STOP, SKIP, EJECT, SOURCE, VOLUME, MUTE.

Audio Settings: Bass (-10 to +10), Treble (-10 to +10), Balance (Left/Center/Right). Radio: Auto-scan, manual tuning, 30 presets. CD: Repeat (Track/All), Shuffle, Program play. Cassette: Dolby NR, Auto-reverse.

Connecting Devices

Speakers: Use proper gauge speaker wire. Auxiliary: RCA cables for external devices.

1. Turn off system before making connections.
2. Match polarity on speaker connections.
3. Select source via SOURCE button (CD, TAPE, TUNER, AUX).
4. Ensure all connections are secure.

Tip: Use high-quality cables for best audio performance.

Playing Media

Supports CDs, cassettes, and radio playback.

1. CD Playback: Insert CD, press PLAY; use SKIP for track navigation.
2. Cassette Playback: Insert tape, press PLAY; AUTO-REVERSE when side ends.
3. Radio: Select TUNER source, use TUNE or PRESET for stations.
4. Auxiliary: Select AUX source, play from connected device.
5. Repeat/Shuffle: Available in CD mode for customized playback.
6. Recording: Cassette deck can record from CD or radio sources.

WARNING! Handle CDs by edges; keep cassettes away from magnets.

Audio Features

Equalizer: Independent bass and treble controls. Balance: Adjust left/right speaker balance. Loudness: Enhances bass at low volumes. Tone Defeat: Bypasses tone controls for pure signal.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Clean CD lens with proper cleaner occasionally.

CAUTION! Do not use chemicals or abrasive cleaners. Keep ventilation openings clear.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European standards. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact customer service at 1-800-KENWOOD.

Troubleshooting

Reset: Disconnect power for 30 seconds to reset system.

Service: 1-800-KENWOOD; www.kenwood.com