Kenwood Home Stereo System Manual

The Kenwood Home Stereo System is a high-quality audio entertainment system featuring AM/FM radio tuner, CD player, cassette deck, auxiliary inputs, multiple speaker outputs, remote control, equalizer settings, preset stations, and various audio enhancement features. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Audio Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main receiver unit, Remote Control, Speaker terminals, CD player, Cassette deck, AM/FM antenna inputs, Auxiliary input jacks.

Feature	Description
AM/FM Tuner	For radio reception with preset stations
CD Player	For playing audio CDs
Cassette Deck	For playing and recording cassette tapes
Auxiliary Input	For external audio devices
Speaker Terminals	For connecting main and surround speakers
Headphone Jack	For private audio listening
AC Power Input	For power connection
Remote Sensor	For receiving remote control signals
Volume Control	Adjusts audio output level
Power Switch	Turns system on/off

Installation

Unpack and inspect contents. Place on stable surface away from heat sources.

Connect speakers: Match positive/negative terminals to speaker wires.
Connect antennas: Attach AM loop antenna and FM wire antenna.
Connect audio sources: Use auxiliary inputs for external devices.
Plug into AC power outlet.

WARNING! Ensure proper ventilation; do not block vents. Use correct speaker impedance.

First-Time Setup

Power on system; initialize settings.

Set clock: Press CLOCK button and set current time.
Program radio stations: Use auto-scan or manual tuning to set presets.
Adjust audio settings: Use equalizer for bass, treble, balance.
Test all functions: Verify CD, cassette, and auxiliary inputs work properly.

CAUTION! Keep away from moisture and magnetic fields.

Specifications

Power Output: 100W per channel (RMS)
Frequency Response: 20Hz - 20kHz
Tuner Section: AM/FM stereo with 30 presets
CD Player: Supports CD, CD-R, CD-RW formats
Cassette Deck: Auto-reverse, Dolby NR
Inputs: Auxiliary, Phono, Tape In/Out
Outputs: Speaker terminals, headphone jack
Power Source: 120V AC, 60Hz
Dimensions: Standard component size

Controls and Settings

Front Panel: POWER, VOLUME, SOURCE SELECT, TUNING, BASS, TREBLE, BALANCE.

Remote: POWER, Numeric buttons, SOURCE SELECT, VOLUME, MUTE, PRESET, PLAY/PAUSE, STOP, EJECT.

Audio: BASS, TREBLE, BALANCE, LOUDNESS. Tuner: PRESET stations, AUTO SCAN, MANUAL TUNING. CD: PLAY, PAUSE, STOP, SKIP, REPEAT. Cassette: PLAY, RECORD, STOP, FF/REW.

Connecting Devices

Speakers: Main speaker terminals. Audio Sources: Auxiliary inputs. Antennas: AM/FM antenna terminals.

Turn off system before connecting devices.
Match speaker polarity (red to red, black to black).
Select source via SOURCE button (TUNER, CD, TAPE, AUX).

Tip: Use high-quality cables for best audio performance.

Playing Media

Supports CDs, cassette tapes, radio, and auxiliary sources.

CD Playback: Insert CD, press PLAY; use SKIP for tracks.
Cassette Playback: Insert tape, press PLAY; FF/REW for fast forward/rewind.
Radio: Select TUNER source, tune to station, save as PRESET.
Auxiliary: Connect external device, select AUX source.
Repeat: Press REPEAT for continuous play (CD).
Recording: Press RECORD+PLAY for cassette recording.

WARNING! Do not touch laser lens in CD player. Keep cassettes away from magnets.

Audio Features

Equalizer: Adjust BASS and TREBLE. Balance: Adjust left/right speaker balance. Loudness: Enhance bass at low volumes. Dolby NR: Reduce tape hiss on cassettes.

Care & Cleaning

Unplug before cleaning. Use soft dry cloth for exterior. Clean CD lens with specialized cleaner only.

CAUTION! Do not use chemicals on surfaces. Demagnetize tape heads periodically.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; try different outlet.
No sound	Volume/speakers	Check volume level; verify speaker connections.
CD won't play	Disc/dirty lens	Ensure disc is clean; use CD lens cleaner.
Poor radio reception	Antenna placement	Reposition antennas; extend fully.
Remote not working	Batteries/obstacles	Replace batteries; ensure clear path to sensor.

Reset: Unplug for 30 seconds to reset system.

Service: 1-800-536-9663; www.kenwood.com