Kenwood KD 2070 Manual

The Kenwood KD 2070 is a high-quality belt-drive turntable featuring semi-automatic operation, adjustable pitch control, anti-skate adjustment, S-shaped tonearm with removable headshell, built-in phono preamp, and multiple speed options. Designed for audiophiles and vinyl enthusiasts, it offers precise tracking and excellent sound reproduction. Below are key sections for setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. Operation Guide 4. Specifications 5. Controls and Adjustments 6. Connecting to Audio System 7. Maintenance & Care 8. Troubleshooting 9. Technical Support

Features at a Glance

Key components: Belt-drive mechanism, S-shaped tonearm, removable headshell, pitch control, anti-skate adjustment, built-in phono preamp, dust cover.

Feature	Description
Drive System	Belt-drive for reduced vibration and noise
Speeds	33 1/3, 45, 78 RPM with pitch control
Tonearm	S-shaped aluminum tonearm with removable headshell
Anti-skate	Adjustable anti-skate control
Pitch Control	±8% adjustable pitch control
Operation	Semi-automatic with auto-return
Phono Preamp	Built-in switchable phono preamp
Dust Cover	Detachable hinged dust cover
Platter	Aluminum die-cast platter
Power	AC adapter input

Installation & Setup

Unpack and inspect all components. Place on stable, level surface.

Install platter: Place belt on motor pulley, align platter on spindle.
Mount cartridge: Attach cartridge to headshell, align properly, secure wires.
Balance tonearm: Set counterweight for proper tracking force.
Set anti-skate: Match anti-skate to tracking force setting.
Connect power: Use supplied AC adapter.

WARNING! Handle cartridge and stylus carefully to avoid damage. Ensure turntable is level for optimal performance.

Operation Guide

Power on turntable; select desired speed and input mode.

Speed selection: Use speed selector for 33/45/78 RPM.
Pitch adjustment: Fine-tune speed with pitch control knob.
Play record: Lift tonearm, move to record start, lower gently.
Auto-return: Tonearm automatically returns at record end.
Manual operation: Use cueing lever for precise tonearm control.

CAUTION! Always use cueing lever to lower tonearm. Never force tonearm movement.

Specifications

Type: Belt-drive semi-automatic turntable
Speeds: 33 1/3, 45, 78 RPM
Pitch Control: ±8% adjustable
Wow & Flutter: <0.15% (WRMS)
Signal-to-Noise: >70dB
Tonearm: S-shaped aluminum static balance
Cartridge: Moving magnet type (included)
Power Supply: DC 12V, 500mA
Dimensions: 430 x 355 x 135mm
Weight: 5.2kg

Controls and Adjustments

Front panel: POWER, SPEED SELECTOR, PITCH CONTROL, START/STOP.

Tonearm adjustments: Counterweight, anti-skate, height adjustment, cueing lever.

Tracking force: Rotate counterweight for recommended force (1.5-2.0g typical). Anti-skate: Set to match tracking force. Height adjustment: Adjust for proper VTA. Cueing: Use lever for smooth tonearm lowering/raising.

Connecting to Audio System

RCA outputs: Standard phono/output jacks. Ground wire: Connect to amplifier ground.

Phono mode: Connect to phono input on amplifier (preamp off).
Line mode: Connect to AUX input (preamp on).
Ground connection: Attach ground wire to amplifier ground terminal.
Power connection: Connect AC adapter to power outlet.

Tip: Ensure all connections are secure to prevent hum and noise.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

Cleaning: Use soft cloth for dust cover and platter.
Stylus care: Clean regularly with stylus brush.
Belt replacement: Replace belt every 2-3 years or as needed.
Lubrication: Apply minimal oil to motor spindle if required.

CAUTION! Never use solvents or abrasive cleaners. Handle stylus with extreme care.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Connections/mode	Check RCA cables; verify phono/line mode setting; ensure ground connected
Speed inconsistent	Belt/cleanliness	Check belt condition and placement; clean motor pulley
Tonearm doesn't move	Mechanical issue	Check cueing mechanism; ensure tonearm is unlocked
Excessive noise	Grounding/cartridge	Verify ground connection; check cartridge wiring
Auto-return not working	Mechanism	Check auto-return mechanism; ensure proper setup

Reset: Power cycle if electronic issues occur.

Technical Support

For technical assistance, replacement parts, or service information, contact Kenwood customer support or authorized service centers. Keep original packaging for warranty service.

Service: Contact authorized Kenwood service center for repairs.

Warranty: Refer to included warranty card for terms and conditions.