Kenwood KDC 1032 Manual

The Kenwood KDC 1032 is a single-DIN car stereo receiver with CD player, AM/FM radio, USB connectivity, auxiliary input, and Bluetooth compatibility. Features include 50W x 4 maximum power output, detachable faceplate security, customizable illumination, preset equalizer settings, and compatibility with various audio formats. Below are key sections for installation, features, operation, and troubleshooting.

Features at a Glance

Key components: Main unit, Remote Control, Wiring harness, Installation hardware, User manual.

Feature	Description
CD Player	Plays audio CDs, CD-R/RW
AM/FM Tuner	30 station presets (18 FM, 12 AM)
USB Port	For USB flash drives and iPod connectivity
Auxiliary Input	3.5mm jack for external audio devices
Bluetooth	Wireless audio streaming and hands-free calling
Power Output	50W x 4 maximum power
Detachable Faceplate	Security feature to prevent theft
Illumination	Customizable button and display colors
EQ Settings	Preset and customizable equalizer modes
Steering Wheel Control	Compatible with vehicle steering wheel controls

Installation

Professional installation recommended. Ensure vehicle is parked with parking brake engaged.

1. Disconnect negative battery terminal before beginning installation.
2. Remove existing stereo using appropriate removal tools.
3. Connect wiring harness following color-coded wiring diagram.
4. Secure unit in dashboard using supplied mounting sleeve.
5. Reconnect battery and test all functions before final assembly.

WARNING! Incorrect installation may damage vehicle electrical system. Always fuse power connections.

Basic Operation

Power on unit by pressing SRC button. Select source mode using SRC button.

1. Radio: Press BAND to select AM/FM, use tuning knob to find stations.
2. CD: Insert disc with label facing up, playback starts automatically.
3. USB: Connect USB device, unit will recognize and begin playback.
4. Bluetooth: Pair mobile device in BT SETUP menu.
5. Aux: Connect 3.5mm cable to auxiliary input.

CAUTION! Do not operate while driving. Set all controls before driving.

Specifications

• Power Output: 50W x 4 (Max), 22W x 4 (RMS)
• Tuner: FM/AM with 30 presets
• CD Compatibility: CD, CD-R, CD-RW, MP3, WMA
• USB: Supports USB 2.0, FAT16/32
• Bluetooth: Version 2.1 + EDR, A2DP, AVRCP
• Frequency Response: 20Hz - 20kHz
• Signal-to-Noise: >80dB
• Dimensions: 178mm(W) x 50mm(H) x 153mm(D)
• Power Requirement: 12V DC, negative ground

Controls and Functions

Front Panel: Power/Volume knob, SRC button, EJECT, Function buttons.

Remote Control: Power, Volume, Track selection, Preset buttons, Mode selection.

Audio Controls: BASS, MID, TREBLE, FADER, BALANCE, LOUDNESS. Source Controls: CD, TUNER, USB, AUX, BT. System Settings: Clock, Display, Illumination, Bluetooth pairing, Reset.

Connecting Devices

USB: Front panel USB port. Auxiliary: 3.5mm front panel jack. Bluetooth: Wireless pairing.

1. Turn off unit before connecting devices.
2. For USB: Format device as FAT16/32 for compatibility.
3. For Bluetooth: Enable pairing mode in BT SETUP menu.
4. For auxiliary: Use shielded audio cable for best quality.

Tip: Update firmware via USB for latest features and bug fixes.

Audio Settings

Access audio menu by pressing AUDIO button.

1. Equalizer: Select from FLAT, POP, ROCK, JAZZ, CLASSICAL, or customize.
2. Bass/Mid/Treble: Adjust ±6 levels for each frequency band.
3. Loudness: Boost low frequencies at low volume levels.
4. Fader/Balance: Adjust speaker output distribution.
5. Subwoofer: Enable/disable and adjust level if connected.

Note: Settings are saved automatically when exiting menu.

Security Features

Detachable Faceplate: Remove for theft prevention. Security Code: 4-digit code required if power disconnected.

1. To set security code: Enter SETUP menu, select SECURITY.
2. Default code: 0000 (change immediately after installation).
3. If code lost: Contact authorized service center with proof of purchase.

WARNING! Keep security code in safe place. Unit will not operate without correct code.

Care & Maintenance

Use soft, dry cloth for cleaning. Do not use chemicals or abrasive cleaners.

CAUTION! Do not insert foreign objects into CD slot or USB port. Keep liquids away from unit.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European compliance. Bluetooth SIG qualified. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/security code	Check fuse and connections; enter security code if prompted.
No sound	Speaker connections	Verify speaker wires connected properly; check mute function.
CD not playing	Disc/loading	Ensure disc is clean and inserted properly; check format compatibility.
Bluetooth not connecting	Pairing mode	Enable pairing mode on both devices; delete old pairings and retry.
USB not recognized	Format/compatibility	Reformat USB as FAT32; check file format compatibility.

Reset: Hold reset button for 5 seconds to restore factory settings.

Service: Contact authorized Kenwood service center for repairs.