Kenwood KDC 132 Manual

The Kenwood KDC 132 is a single-DIN car stereo receiver with CD player, AM/FM radio, front auxiliary input, USB connectivity, and 4-channel amplifier. Features include detachable faceplate security, 13-character LCD display, preset EQ settings, loudness control, and compatibility with various audio formats. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Security Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: CD player, AM/FM tuner, USB port, AUX input, detachable faceplate, LCD display, remote control.

Feature	Description
CD Player	Plays audio CDs and CD-R/RW
AM/FM Tuner	30 station presets (18 FM, 12 AM)
USB Port	For USB flash drives and MP3 playback
AUX Input	3.5mm front panel input for external devices
Detachable Faceplate	Security feature to prevent theft
LCD Display	13-character display with orange illumination
Power Output	50W x 4 channels max power
EQ Presets	6-band equalizer with preset sound profiles
Loudness	Enhances bass at low volume levels
Remote Control	Optional remote control available

Installation

Proper installation ensures optimal performance and safety.

Disconnect negative battery terminal before installation.
Remove existing stereo from dashboard using removal tools.
Connect wiring harness following color-coded wiring diagram.
Connect antenna cable and ground wire to chassis.
Slide unit into dashboard and secure with mounting sleeve.
Reconnect battery and test all functions.

WARNING! Always disconnect vehicle battery before installation to prevent electrical shorts or damage.

First-Time Setup

Initial configuration for optimal use.

Power on unit: Press SRC button to turn on.
Set clock: Hold CLK button and use tuning knob to set time.
Program radio stations: Tune to desired station, hold preset button for 2 seconds.
Adjust audio settings: Use EQ button to select sound profile (POP, ROCK, etc.).
Set bass/treble: Use TONE button to adjust bass and treble levels.

CAUTION! Ensure proper ventilation around unit to prevent overheating.

Specifications

Power Output: 50W x 4 (Max), 22W x 4 (RMS)
Tuner: FM/AM with 30 presets
CD Compatibility: CD, CD-R, CD-RW
USB: Supports MP3, WMA playback
Frequency Response: 20Hz - 20kHz
Signal-to-Noise: >90dB
Dimensions: 7" W x 2" H x 6" D
Power Requirement: 12V DC, negative ground
Illumination: Orange LCD display

Controls and Settings

Front panel controls: POWER/VOLUME knob, SRC (source), BAND, TUNE, EQ, TONE, AUX, USB.

Remote Functions: POWER, VOLUME, MUTE, SRC, PRESET, TUNE, PLAY/PAUSE.

Audio Settings: EQ presets (FLAT, POP, ROCK, JAZZ, CLASSIC), Bass (-5 to +5), Treble (-5 to +5), Loudness (On/Off), Balance/Fader. Radio: Auto store, Local/DX reception. CD: Repeat, Random play. General: Clock setting, Display dimmer.

Connecting Devices

USB: Front panel USB port for flash drives. AUX: 3.5mm front input for MP3 players, phones.

Turn off unit before connecting devices.
For USB: Insert flash drive, press USB button to access.
For AUX: Connect 3.5mm cable, press AUX button to select.
Use SRC button to cycle between sources (TUNER, CD, USB, AUX).

Tip: Format USB drives to FAT32 for best compatibility.

Playing Media

Supports CD, USB, and AUX input sources.

CD Playback: Insert CD, unit automatically starts playback.
USB Playback: Insert USB drive, press USB button to access files.
Track Navigation: Use TUNE knob or >>| and |<< buttons.
Play Modes: Press RPT for repeat, RDM for random play.
Fast Forward/Rewind: Hold >>| or |<< buttons during playback.
Pause: Press || button during CD/USB playback.
Folder Navigation (USB): Use TUNE knob to browse folders.

WARNING! Do not use damaged or scratched CDs. Keep USB connections clean.

Security Features

Detachable Faceplate: Remove for theft prevention - press release button and slide faceplate off. Code Security: Optional security code can be set in menu (default: 0000).

Care & Maintenance

Clean with soft, dry cloth only. Do not use chemicals or abrasives. Remove faceplate when cleaning. Keep CDs and USB ports free of dust and debris.

CAUTION! Do not spray cleaning fluids directly on unit. Avoid extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European compliance. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized service centers. Dispose of properly according to local electronic waste regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check fuse, wiring connections, and battery connection.
No sound	Settings/speakers	Check volume, mute, speaker connections, fader settings.
CD won't play	Disc/loading	Check disc for damage, ensure proper insertion, clean lens.
USB not recognized	Format/compatibility	Reformat to FAT32, try different USB drive, check file format.
Poor radio reception	Antenna/location	Ensure antenna connected properly, check antenna amplifier.

Reset: Disconnect battery for 5 minutes to reset unit.

Service: Contact authorized Kenwood service center for repairs.