Kenwood KDC 319 Manual

The Kenwood KDC 319 is a single-DIN CD receiver with USB and AUX inputs, featuring 50W x 4 high power output, detachable faceplate security, CD-R/RW playback compatibility, MP3/WMA file support, preset equalizer modes, loudness function, and rotary volume control. Below are key sections for features, installation, operation, settings, and troubleshooting.

Features at a Glance

Key components: CD receiver unit, Remote Control, Detachable faceplate, USB port, AUX input, Speaker outputs, Power connections.

Feature	Description
CD playback	Plays CD, CD-R, CD-RW discs
USB port	For USB flash drives and MP3 playback
AUX input	3.5mm jack for external audio devices
Power output	50W x 4 channels (max power)
Detachable faceplate	Security feature to prevent theft
Preset EQ	6-band equalizer with preset modes
Rotary volume	Easy volume adjustment knob
Loudness function	Enhances bass at low volumes
Radio tuner	AM/FM with 18 station presets
Display dimmer	Adjustable display brightness

Installation

Proper installation ensures optimal performance and safety.

1. Disconnect vehicle battery negative terminal before installation.
2. Mount unit in dashboard using appropriate mounting sleeve.
3. Connect wiring harness: Match color-coded wires (red-ignition, yellow-battery, black-ground).
4. Connect speakers: Front and rear speaker outputs.
5. Connect antenna plug to antenna input.
6. Reconnect battery and test unit operation.

WARNING! Always disconnect battery before installation to prevent electrical shorts. Ensure all connections are secure.

Basic Operation

Power on unit; attach faceplate if detached.

1. Source selection: Press SOURCE to cycle through CD, USB, AUX, TUNER.
2. Volume control: Turn rotary knob for volume adjustment.
3. CD playback: Insert CD; unit automatically begins playback.
4. Radio tuning: Press BAND to select AM/FM; use TUNE for station selection.
5. Preset stations: Hold 1-6 buttons to store current station.
6. Mute: Press MUTE to temporarily silence audio.

CAUTION! Do not operate while driving. Set all controls before driving.

Specifications

• Power Output: 50W x 4 (Max Power)
• CD Compatibility: CD, CD-R, CD-RW
• File Support: MP3, WMA
• Radio: AM/FM tuner with 18 presets
• Inputs: USB, AUX (3.5mm)
• Display: LCD with adjustable dimmer
• Security: Detachable faceplate
• Power Requirement: 12V DC, negative ground
• Dimensions: Single-DIN (178mm x 50mm)

Controls and Functions

Front Panel: POWER/VOLUME knob, SOURCE, EJECT, FUNCTION, BAND, numbered presets.

Remote: POWER, VOLUME, MUTE, SOURCE, TRACK UP/DOWN, PRESET, BAND.

Basic Functions: SOURCE selection, VOLUME control, EJECT for CD, FUNCTION for settings. Radio: BAND selection, TUNE/SEEK, PRESET storage. CD/USB: PLAY/PAUSE, TRACK selection, REPEAT, RANDOM. Settings: Audio adjustments via FUNCTION button.

Audio Settings

Access audio settings by pressing FUNCTION button.

1. Bass/Treble: Adjust low and high frequencies.
2. Balance/Fader: Adjust speaker balance and front/rear fader.
3. Loudness: Enhance bass response at low volumes.
4. EQ Presets: Select from ROCK, POP, CLASSIC, JAZZ, FLAT.
5. Subwoofer: Adjust subwoofer level if connected.

Tip: Use flat EQ setting for most accurate sound reproduction.

USB and AUX Playback

Supports USB flash drives and external audio devices.

1. USB playback: Connect USB device; select USB source.
2. File navigation: Use folder up/down to navigate directories.
3. MP3/WMA: Supports ID3 tag display for artist/track info.
4. AUX input: Connect 3.5mm cable from external device.
5. Playback control: Play/pause, track skip, repeat, random.

WARNING! Do not remove USB device during playback. Safely eject using stop function.

Security Features

Detachable Faceplate: Remove for theft prevention. Release button on front panel.

Storage: Store faceplate in protective case when not in use.

Reattachment: Align connectors and press firmly until click.

Care & Maintenance

Clean with soft, dry cloth only. Do not use chemicals or solvents.

CD Care: Handle discs by edges; keep free of scratches and fingerprints.

CAUTION! Do not spray cleaning fluids directly on unit. Keep away from moisture.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European conformity. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check battery and ignition connections; verify fuse.
No sound	Speaker connections	Verify speaker wire connections; check mute function.
CD won't play	Disc/format	Ensure disc is clean and compatible format; check for scratches.
USB not recognized	Format/compatibility	Use FAT32 formatted drives; verify file compatibility.
Poor radio reception	Antenna connection	Ensure antenna connected properly; check for obstructions.

Reset: Disconnect battery for 1 minute to reset unit.

Service: Contact authorized Kenwood service center for repairs.