Kenwood KDC BT362U Manual

The Kenwood KDC BT362U is a single-DIN car stereo receiver with Bluetooth connectivity, USB port, auxiliary input, CD playback capability, AM/FM radio tuner, and 50W x 4 channel output. Features include hands-free calling, audio streaming, customizable illumination, preset equalizer settings, and remote control compatibility. Below are key sections for features, installation, operation, settings, and troubleshooting.

1. Features at a Glance 2. Installation 3. Basic Operation 4. Specifications 5. Controls and Settings 6. Bluetooth Connectivity 7. USB and Auxiliary Playback 8. Radio Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front panel with LCD display, CD slot, USB port, AUX input, control buttons, detachable faceplate, and Bluetooth connectivity.

Feature	Description
Bluetooth	Hands-free calling and audio streaming
USB Port	For USB flash drives and device charging
Auxiliary Input	3.5mm jack for external audio devices
CD Player	Plays CD, CD-R, CD-RW formats
AM/FM Tuner	30 station presets (18 FM, 12 AM)
Power Output	50W x 4 channels (max)
Illumination	Customizable color settings
Remote Control	Optional remote control compatible
Detachable Face	Security feature to prevent theft
EQ Settings	Multiple preset equalizer modes

Installation

Ensure vehicle is turned off before installation. Follow proper wiring diagram.

Disconnect negative battery terminal for safety.
Remove existing stereo using appropriate removal tools.
Connect wiring harness following color-coded wires.
Connect antenna cable and ground wire.
Test unit functions before final mounting.
Secure unit in dashboard and reattach faceplate.

WARNING! Professional installation recommended. Incorrect wiring may damage unit or vehicle electrical system.

Basic Operation

Power on unit by pressing SRC button. Use volume knob and function buttons for navigation.

Source Selection: Press SRC to cycle through modes (Radio, CD, USB, BT, AUX).
Volume Control: Turn knob clockwise to increase, counterclockwise to decrease.
Menu Access: Press and hold AUDIO for sound settings.
Bluetooth Pairing: Enter BT mode and follow pairing instructions.
CD Operation: Insert disc label-side up for automatic playback.

CAUTION! Do not operate while driving. Set all functions before vehicle motion.

Specifications

Power Output: 50W x 4 (Max), 22W x 4 (RMS)
Frequency Response: 20Hz - 20kHz
Signal-to-Noise Ratio: >80dB
Bluetooth Version: 3.0 + EDR
USB Support: MP3, WMA playback
CD Formats: CD, CD-R, CD-RW
Power Requirement: 12V DC, negative ground
Dimensions: 178mm (W) x 50mm (H) x 153mm (D)
Operating Temp: -20°C to +60°C

Controls and Settings

Front Panel Controls: POWER/VOLUME knob, SRC, AUDIO, BAND, TUNE/TRACK, MUTE, PHONE.

Remote Functions: Power, Volume, Source, Track selection, Preset buttons, Mute.

Audio Settings: Bass, Treble, Balance, Fader, Loudness, EQ presets (Pop, Rock, Jazz, etc.). System Settings: Display dimmer, illumination color, clock setting, Bluetooth settings, reset function.

Bluetooth Connectivity

Pair mobile device for hands-free calling and audio streaming.

Press SRC to select BT mode.
Enable Bluetooth on mobile device.
Search for "KDC-BT362U" in device list.
Enter PIN "0000" if prompted.
Confirm pairing on both devices.

Tip: Keep mobile device within 3 feet for optimal Bluetooth performance.

USB and Auxiliary Playback

Supports USB flash drives and auxiliary input devices.

USB Playback: Insert USB device, select USB mode, navigate folders with TUNE knob.
Auxiliary Input: Connect 3.5mm cable from external device, select AUX mode.
File Support: MP3, WMA audio files up to 320kbps.
Charging: USB port provides 5V/1A charging for compatible devices.

WARNING! Use only FAT32 formatted USB devices. Do not remove during playback.

Radio Operation

AM/FM tuner with automatic and manual station seeking.

Press BAND to select AM or FM mode.
Auto Seek: Press and release TUNE knob to find next strong station.
Manual Tune: Turn TUNE knob to browse frequencies.
Preset Stations: Hold desired numbered button (1-6) for 2 seconds to store.
Recall Presets: Press numbered buttons to select stored stations.

Tip: For best reception, ensure antenna is fully extended and properly connected.

Care & Maintenance

Clean with soft, dry cloth only. Do not use chemicals or abrasive cleaners.

CAUTION! Remove faceplate before cleaning. Avoid moisture and extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device compliant. Bluetooth qualified device. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized service centers. This device complies with part 15 of the FCC Rules.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check fuse and wiring connections; verify 12V power.
Bluetooth not connecting	Pairing/range	Delete old pairing; ensure device is within range; reset BT.
CD not playing	Disc/damage	Check disc for scratches; ensure proper insertion; clean lens.
Poor radio reception	Antenna/connection	Check antenna connection; extend antenna fully; relocate vehicle.
USB not recognized	Format/capacity	Reformat to FAT32; use smaller capacity drive; check file format.

Reset: Hold AUDIO and SRC simultaneously for 5 seconds to factory reset.

Service: Contact authorized Kenwood service center for repairs.