Kenwood KDC BT365U Manual

The Kenwood KDC BT365U is a single-DIN car stereo with Bluetooth connectivity, USB input, auxiliary input, CD player, AM/FM radio, and advanced audio controls. Features include hands-free calling, audio streaming, customizable EQ settings, detachable faceplate security, and compatibility with various audio formats. Below are key sections for features, installation, operation, settings, and troubleshooting.

1. Features at a Glance 2. Installation 3. Basic Operation 4. Specifications 5. Controls and Functions 6. Bluetooth Connectivity 7. Audio Settings 8. Security Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with detachable faceplate, remote control, wiring harness, Bluetooth module, USB port, auxiliary input, CD slot.

FeatureDescription
Bluetooth ConnectivityHands-free calling and audio streaming
USB InputFor USB devices and charging
Auxiliary Input3.5mm jack for external audio sources
CD PlayerPlays CD, CD-R, CD-RW formats
AM/FM TunerWith preset stations and RDS
Audio Controls13-band EQ, loudness, fader, balance
Detachable FaceplateSecurity feature against theft
Power Output50W x 4 channels max
DisplayMulti-color LCD with adjustable illumination
Steering Wheel ControlCompatible with optional interface

Installation

Ensure vehicle is turned off before installation.

  1. Disconnect negative battery terminal for safety.
  2. Remove existing stereo using appropriate tools.
  3. Connect wiring harness following color codes: red (ignition), yellow (battery), black (ground).
  4. Connect speakers: gray/white front, green/purple rear.
  5. Mount unit securely in dashboard.
  6. Reconnect battery and test functions.

WARNING! Professional installation recommended. Incorrect wiring may damage unit or vehicle electrical system.

Basic Operation

Power on unit by pressing SRC button.

  1. Source selection: Press SRC to cycle through modes (Radio, CD, USB, BT, AUX).
  2. Volume control: Turn knob or use remote volume buttons.
  3. Radio: Tune with seek buttons; store presets by holding number buttons.
  4. CD: Insert disc; use playback controls (play, pause, skip).
  5. USB: Connect device; navigate folders with folder buttons.

CAUTION! Do not operate while driving. Set all controls before driving.

Specifications

Controls and Functions

Front Panel: SRC, VOLUME knob, BAND, TUNE/TRACK, MENU, EJECT, AUX/USB port.

Remote Control: Power, Volume, Mode, Preset, Mute, Play/Pause, Number buttons.

Menu Functions: Audio settings (EQ, balance, fader), Bluetooth setup, Display settings (dimmer, color), System reset. Press MENU button to access settings; use TUNE knob to navigate.

Bluetooth Connectivity

Pairing process for hands-free calling and audio streaming.

  1. Enable Bluetooth on mobile device.
  2. Press BT button on unit or select BT in source menu.
  3. Search for "KDC-BT365U" on mobile device.
  4. Enter PIN "0000" if prompted.
  5. Confirm pairing on both devices.

Tip: Up to 5 devices can be paired; only one can be connected at a time.

Audio Settings

Access audio menu by pressing MENU and selecting AUDIO.

Security Features

Detachable Faceplate: Press release button and slide faceplate off. Store securely when leaving vehicle.

Security Code: 4-digit code can be set in system menu. Unit will require code after power loss if enabled.

Care & Maintenance

Use soft, dry cloth for cleaning. Do not use chemicals or abrasives.

CAUTION! Keep faceplate away from extreme temperatures and moisture. Do not touch CD lens.

Regulatory Information

FCC ID: A8JKDCBT365U. Complies with Part 15 FCC Rules. This device may not cause harmful interference and must accept any interference received. Bluetooth is a trademark of Bluetooth SIG, Inc. For support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerWiring/ fuseCheck fuse and wiring connections; verify battery connection
Bluetooth not connectingPairing/ distanceDelete old pairing; ensure device within 3 feet; restart both devices
CD not playingDisc/ lensCheck disc for damage; clean with proper CD cleaner; ensure correct format
Poor radio receptionAntennaEnsure antenna fully extended and properly connected
USB not recognizedFormat/ deviceUse FAT32 format; ensure device draws less than 500mA; try different cable

Reset: Hold MENU button for 5 seconds to factory reset (will erase all settings).

Service: 1-800-536-9663; www.kenwood.com

Kenwood KDC BT365U Manual © - All Rights Reserved 2025