Kenwood KDC BT562U Manual

The Kenwood KDC BT562U is a single-DIN car stereo with built-in Bluetooth connectivity, USB port, auxiliary input, CD player, AM/FM radio, and 50W x 4 channel output. Features include hands-free calling, audio streaming, front panel USB for iOS/Android devices, customizable illumination, and detachable faceplate security. Below are key sections for features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Bluetooth Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with detachable faceplate, remote control, wiring harness, mounting sleeve, user manual.

Feature	Description
Bluetooth	Hands-free calling and audio streaming
USB Port	Front panel connection for iOS/Android devices
Auxiliary Input	3.5mm jack for external audio sources
CD Player	Plays CD, CD-R, CD-RW formats
AM/FM Tuner	30 station presets (18FM/12AM)
Power Output	50W x 4 channels (max)
Detachable Faceplate	Security feature to prevent theft
Illumination	Customizable button colors
EQ Settings	Bass, Treble, Loudness controls
Source Select	Toggle between radio, CD, USB, BT, Aux

Installation

Unpack and verify all components. Ensure vehicle is turned off during installation.

Disconnect negative battery terminal for safety.
Remove existing stereo using DIN tools if applicable.
Connect wiring harness following color-coded wires (red-ignition, yellow-battery, black-ground).
Connect speakers ensuring proper polarity.
Slide unit into mounting sleeve and secure with brackets.
Reconnect battery and test functions.

WARNING! Professional installation recommended. Incorrect wiring may damage unit or vehicle electrical system.

First-Time Setup

Power on unit; follow initial configuration steps.

Bluetooth pairing: Press SOURCE to BT mode, search for "KDC-BT562U" on phone.
Radio presets: Tune to desired stations, press and hold preset button.
Illumination: Press SETUP, select COLOR to choose button lighting.
Audio settings: Adjust bass, treble, balance, fader to preference.
Security: Remove faceplate when leaving vehicle unattended.

CAUTION! Do not operate while driving. Set all controls before driving.

Specifications

Power Output: 50W x 4 (Max), 22W x 4 (RMS)
Bluetooth Version: 3.0 + EDR
Supported Formats: CD, CD-R, CD-RW, MP3, WMA
Frequency Response: 20Hz - 20kHz
Signal-to-Noise Ratio: >80dB
Dimensions: 178mm(W) x 50mm(H) x 153mm(D)
Power Requirement: 12V DC, negative ground
Operating Temp: -20°C to +60°C

Controls and Settings

Front Panel: POWER/VOLUME knob, SOURCE, BAND, TUNE/TRACK, SETUP, EJECT.

Remote: POWER, VOLUME, MUTE, SOURCE, PRESET, PLAY/PAUSE, TRACK UP/DOWN.

Audio Settings: BASS, TREBLE, BALANCE, FADER, LOUDNESS. Display: DIMMER, COLOR selection. Bluetooth: PAIR, CALL, VOICE. Radio: AUTO MEMORY, LOCAL/DX. CD: REPEAT, RANDOM, SCAN. Setup: BEEP, CLOCK, RESET.

Connecting Devices

USB: Front port for flash drives or phone connection. Aux: 3.5mm jack for MP3 players. Bluetooth: Wireless audio and phone connection.

Ensure unit is powered on and in correct source mode.
USB: Insert flash drive or connect phone cable.
Aux: Connect 3.5mm cable from external device.
Bluetooth: Enable pairing mode, connect from phone settings.

Tip: Use high-quality cables for best audio performance.

Playing Media

Supports CD, USB, Bluetooth, and Aux sources.

CD: Insert disc label-side up, closes automatically.
USB: Connect device, press SOURCE to USB mode.
Bluetooth: Pair phone, select BT audio mode.
Aux: Connect cable, select AUX source.
Navigation: Use TUNE/TRACK for previous/next.
Play modes: REPEAT (track/folder/all), RANDOM play.
Fast forward/rewind: Press and hold TRACK buttons.
Eject: Press EJECT button to remove CD.

WARNING! Do not insert damaged discs. Keep USB port clean and dry.

Bluetooth Features

Hands-free calling: Answer/end calls with CALL button. Audio streaming: Play music from Bluetooth devices. Phonebook access: Download contacts for voice dialing.

Pairing: Enter BT mode, search from phone, enter PIN "0000".
Call functions: ANSWER/END with CALL button.
Voice dial: Press and hold CALL button for voice commands.
Reconnect: Automatically reconnects to last paired device.

Care & Maintenance

Clean with dry, soft cloth. Do not use solvents or chemicals. Store faceplate in protective case when removed.

CAUTION! Avoid extreme temperatures and moisture. Do not disassemble unit.

Regulatory Information

FCC Part 15 compliant. This device complies with Industry Canada license-exempt RSS standard(s). Bluetooth® is a registered trademark of Bluetooth SIG, Inc. For support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/ignition	Check battery and ignition connections; verify fuse
Bluetooth not connecting	Pairing mode/distance	Enter pairing mode; ensure within 3 feet; delete old pairing
CD not playing	Disc format/damage	Use supported formats; check for scratches; clean disc
Poor radio reception	Antenna connection	Ensure antenna fully extended and connected properly
No sound from speakers	Wiring/settings	Check speaker connections; verify balance/fader settings

Reset: Press RESET button with small object if unit freezes.

Service: 1-800-536-9663; www.kenwood.com