Kenwood KDC BT565U Manual

The Kenwood KDC BT565U is a single-DIN car stereo receiver with Bluetooth connectivity, USB port, auxiliary input, CD player, AM/FM radio, and 50W x 4 channel output. Features include hands-free calling, audio streaming, customizable illumination, preset equalizer settings, and compatibility with various audio formats. Below are key sections for features, installation, operation, settings, and troubleshooting.

1. Features at a Glance 2. Installation 3. Basic Operation 4. Specifications 5. Controls and Functions 6. Bluetooth Connectivity 7. Audio Settings 8. USB and Auxiliary Playback 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit, Remote Control, Wiring harness, User manual, Installation hardware.

Feature	Description
Bluetooth	Hands-free calling and audio streaming
USB Port	For USB devices and charging
Auxiliary Input	3.5mm jack for external audio devices
CD Player	Plays CD, CD-R, CD-RW formats
AM/FM Tuner	30 station presets (18FM/12AM)
Power Output	50W x 4 channels (max)
Illumination	Customizable button colors
EQ Settings	Preset and customizable sound profiles
Steering Wheel Control	Compatible with external adapters
Detachable Face	Security feature

Installation

Disconnect negative battery terminal before installation.

Remove existing stereo: Use removal tools to extract old unit.
Connect wiring harness: Match wire colors (red-ignition, yellow-battery, black-ground).
Connect speakers: Front and rear speaker outputs.
Connect antenna: Push antenna plug firmly into port.
Test functions: Reconnect battery, test all features before final mounting.
Secure unit: Slide into dash and secure with mounting sleeve.

WARNING! Ensure proper grounding and fuse protection. Professional installation recommended.

Basic Operation

Power on unit; source button cycles through modes.

Volume control: Turn knob or use remote volume buttons.
Source selection: Press SOURCE to cycle through radio, CD, USB, BT, AUX.
Radio operation: Tune with seek buttons; store presets by holding number.
CD playback: Insert disc; use track buttons for navigation.
Bluetooth: Pair phone for calls and music streaming.

CAUTION! Do not operate while driving. Set controls before driving.

Specifications

Power Output: 50W x 4 (Max), 22W x 4 (RMS)
Tuner: FM/AM with 30 presets
CD Compatibility: CD, CD-R, CD-RW, MP3, WMA
USB: Supports MP3, WMA, WAV formats
Bluetooth: Version 3.0, A2DP, HFP
Inputs: USB, 3.5mm AUX
Illumination: 3-color customizable
Power Supply: 12V DC negative ground
Dimensions: Single DIN (178mm x 50mm)

Controls and Functions

Front Panel: Power/Volume knob, Source button, Eject, Function button.

Remote: Power, Volume, Source, Track up/down, Preset buttons, Menu.

Audio Controls: BASS, MID, TREBLE, Loudness, Balance, Fader. Display: Dimmer control, Clock setting. Bluetooth: Pairing button, Call answer/end. Security: Detachable faceplate release.

Bluetooth Connectivity

Pair mobile device for hands-free operation.

Enable Bluetooth on phone.
Press SOURCE to select BT mode.
Press and hold Pair button until display shows "PAIRING".
Select "KDC-BT565U" from phone's Bluetooth list.
Enter PIN "0000" if prompted.
Confirm connection on both devices.

Tip: Keep phone within 3 feet for initial pairing. Up to 5 devices can be paired.

Audio Settings

Access audio menu by pressing Function button.

Equalizer: FLAT, POP, ROCK, JAZZ, CLASSIC, USER
Bass/Mid/Treble: Adjust from -7 to +7
Loudness: On/Off for bass boost at low volumes
Balance/Fader: Adjust speaker output distribution
Subwoofer: Pre-out settings if connected
Time Alignment: Adjust audio timing for seating position

Note: Custom EQ settings are saved in USER mode.

USB and Auxiliary Playback

Supports USB drives and auxiliary devices.

USB: Insert USB drive; unit reads compatible audio files automatically.
Navigation: Use folder/track buttons to browse files.
Auxiliary: Connect 3.5mm cable from external device to AUX port.
Playback control: Play/pause, skip tracks from source device.
Charging: USB port provides 5V/1A charging capability.

WARNING! Do not remove USB during playback. Use compatible file formats only.

Care & Maintenance

Use soft, dry cloth for cleaning. Avoid chemicals and abrasives.

CAUTION! Remove faceplate before cleaning. Keep liquids away from unit. Store faceplate in protective case.

Regulatory Information

FCC Part 15: Class B digital device compliant. Bluetooth qualified device. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized service centers. This device complies with part 15 of FCC Rules.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check battery and ignition connections; replace fuse.
Bluetooth not connecting	Pairing mode/distance	Ensure pairing mode; move phone closer; delete old pairing.
CD not playing	Disc/damage	Check disc format; clean disc; ensure proper insertion.
USB not recognized	Format/compatibility	Use FAT32 format; check file compatibility; try different USB.
Poor radio reception	Antenna/connection	Ensure antenna fully extended; check antenna connection.

Reset: Press reset button with small tool if unit locks up.

Service: Contact authorized Kenwood service center for repairs.