Kenwood KDC BT600U Manual

The Kenwood KDC BT600U is a single-DIN car stereo with Bluetooth connectivity, USB input, AM/FM radio, CD playback, and auxiliary input. Features include hands-free calling, audio streaming, 50W x 4 channels, detachable faceplate security, customizable illumination, and EQ settings. Below are key sections for features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. Basic Operation 4. Specifications 5. Controls and Settings 6. Bluetooth Connectivity 7. USB and Auxiliary Playback 8. Security Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with detachable faceplate, Remote Control, Wiring harness, USB port, Auxiliary input, Bluetooth antenna.

Feature	Description
Bluetooth connectivity	For hands-free calling and audio streaming
USB port	For USB flash drives and device charging
Auxiliary input	For external audio devices
CD playback	Supports CD-DA, CD-R, CD-RW formats
AM/FM tuner	30 station presets (18 FM, 12 AM)
Power output	50W x 4 channels (max)
Detachable faceplate	Security feature to prevent theft
EQ settings	Bass, Treble, Loudness, and preset sound profiles
Illumination	Customizable button and display colors
Remote control	Full function remote included

Installation

Unpack and verify all components. Ensure vehicle is turned off during installation.

Disconnect negative battery terminal for safety.
Remove existing stereo from dashboard.
Connect wiring harness: Match color-coded wires (red-ignition, yellow-battery, black-ground).
Connect antenna and Bluetooth adapter.
Secure unit in dashboard and reconnect battery.

WARNING! Always disconnect battery before installation to prevent electrical shorts. Use proper wiring harness adapter.

Basic Operation

Power on unit by pressing SRC button. Detach faceplate when parked for security.

Source selection: Press SRC to cycle through Radio, CD, USB, BT, AUX.
Volume control: Turn knob or use remote VOL+/- buttons.
Radio tuning: Use TUNE buttons or seek function for automatic station search.
Preset stations: Hold 1-6 buttons to store current station.
CD operation: Insert disc label-side up; use playback controls.

CAUTION! Do not operate while driving. Set all controls before driving.

Specifications

Power Output: 50W x 4 channels (Max)
Bluetooth Version: 2.1 + EDR
Supported Formats: CD-DA, CD-R, CD-RW, MP3, WMA
Frequency Response: 20Hz - 20kHz
Signal-to-Noise Ratio: >80dB
Inputs: USB, 3.5mm Auxiliary
Illumination: 3-color customizable (Red/Blue/Green)
Power Requirement: 12V DC, negative ground
Dimensions: 178mm (W) x 50mm (H) x 153mm (D)

Controls and Settings

Front Panel: SRC (source), VOL knob, Power/Att, Eject, Function button.

Remote: Power, Volume, Track selection, Mode, Preset buttons, Mute.

Audio Settings: Bass (-10 to +10), Treble (-10 to +10), Loudness (On/Off), Balance/Fader. Source Settings: Radio (Local/DX), CD (Repeat/Random), Bluetooth (Pairing). System Settings: Display dimmer, Button illumination, Clock setting, Reset function.

Bluetooth Connectivity

Pair mobile devices for hands-free calling and audio streaming.

Enable Bluetooth on mobile device.
Press and hold BT button until "PAIRING" appears.
Select "KDC-BT600U" from device list.
Enter PIN "0000" if prompted.
Accept calls with TEL button; end calls with same button.

Tip: Keep mobile device within 3 feet for optimal Bluetooth performance.

USB and Auxiliary Playback

Supports USB drives up to 32GB and MP3/WMA playback.

USB: Connect USB device; unit automatically detects and plays compatible files.
Folder navigation: Use Folder up/down buttons to browse directories.
Auxiliary: Connect 3.5mm cable from external device to AUX input.
Playback controls: Play/Pause, Previous/Next track, Fast forward/rewind.
Repeat/Shuffle: Access through Function menu for different playback modes.

WARNING! Do not remove USB device during playback. Safely eject through menu first.

Security Features

Detachable Faceplate: Remove when parked to prevent theft. Security Code: 4-digit code can be set to disable unit if stolen.

Care & Maintenance

Use soft, dry cloth for cleaning. Do not use chemicals or abrasive cleaners.

CAUTION! Keep liquids away from unit. Do not insert foreign objects into CD slot or ports.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check battery and ignition connections; verify fuse integrity.
Bluetooth not connecting	Pairing mode/distance	Ensure unit in pairing mode; move device closer; delete old pairing.
CD not playing	Disc/damage	Check disc for scratches; ensure proper insertion; clean lens.
USB not recognized	Format/capacity	Use FAT32 format; ensure drive under 32GB; try different USB port.
Poor radio reception	Antenna connection	Verify antenna cable secure; check for damaged antenna.

Reset: Hold Reset button for 3 seconds to restore factory settings.

Service: 1-800-536-9663; www.kenwood.com