Kenwood KDC BT710HD Manual

The Kenwood KDC BT710HD is a high-performance car stereo receiver featuring Bluetooth connectivity, HD Radio compatibility, USB input, auxiliary input, CD playback, and advanced audio controls. With built-in amplifier, customizable EQ settings, and hands-free calling capabilities, this unit delivers superior sound quality and modern connectivity options for your vehicle. Below are key sections covering features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Bluetooth Pairing 8. Audio Settings 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with display, Remote Control, Wiring harness, USB port, Auxiliary input, Bluetooth antenna.

Feature	Description
Bluetooth Connectivity	For hands-free calling and audio streaming
HD Radio Compatibility	For digital radio reception with CD-quality sound
USB Input	For connecting USB devices and charging
Auxiliary Input	For external audio sources
CD Playback	Supports CD, CD-R, CD-RW formats
Built-in Amplifier	50W x 4 channels maximum power
EQ Settings	Customizable sound profiles
LCD Display	Backlit display with adjustable dimmer
Steering Wheel Control	Compatible with steering wheel remote interfaces
Preset Memory	18 FM/6 AM station presets

Installation

Prepare vehicle and gather necessary tools before installation.

Disconnect negative battery terminal for safety.
Remove existing stereo using appropriate removal tools.
Connect wiring harness following color-coded connections.
Mount unit securely in dashboard opening.
Connect antenna and Bluetooth antenna if applicable.
Reconnect battery and test all functions.

WARNING! Always disconnect vehicle battery before installation to prevent electrical shorts or damage.

First-Time Setup

Power on unit; follow initial setup procedures.

Set clock: Press SOURCE to turn on, then hold SETUP to access clock settings.
Pair Bluetooth: Access Bluetooth menu and follow pairing instructions.
Program radio presets: Tune to desired stations and press and hold preset buttons.
Adjust audio settings: Use EQ and sound settings to customize audio output.
Set display preferences: Adjust dimmer and display settings as needed.

CAUTION! Ensure proper wiring connections to avoid electrical issues.

Specifications

Power Output: 50W x 4 channels (max), 22W x 4 channels (RMS)
Bluetooth Version: 3.0 + EDR
Radio Tuner: FM/AM with HD Radio capability
Supported Media: CD, CD-R, CD-RW, MP3, WMA
USB Support: USB 2.0, up to 32GB
Display: LCD with variable color illumination
Inputs: USB, Auxiliary, Bluetooth audio
Power Requirement: 12V DC, negative ground
Dimensions: DIN size (7" x 2")

Controls and Settings

Front panel controls: POWER/VOLUME knob, SOURCE, BAND, USB/AUX buttons.

Remote Control: POWER, VOLUME, SOURCE, TRACK UP/DOWN, PRESET, MUTE, SETUP.

Audio Settings: BASS, MIDDLE, TREBLE, LOUDNESS, BALANCE, FADER. System Settings: CLOCK, DISPLAY (dimmer, color), BEEP, LANGUAGE. Bluetooth: PAIRING, PHONEBOOK, CALL HISTORY. Radio: AUTO STORE, LOCAL/DX, AM/FM tuning.

Connecting Devices

USB: Connect USB device to USB port. Auxiliary: Connect 3.5mm audio cable to AUX input. Bluetooth: Pair compatible devices.

Ensure unit is powered on and in appropriate source mode.
Connect USB device for music playback and charging.
Use auxiliary cable for non-Bluetooth audio devices.
For Bluetooth, ensure device pairing is completed.

Tip: Use high-quality cables for best audio performance.

Bluetooth Pairing

Supports hands-free calling and audio streaming.

Enable Bluetooth on your mobile device.
Press SOURCE to select Bluetooth mode.
Press and hold PAIRING button until display shows "PAIRING".
Select "KDC-BT710HD" from your device's Bluetooth menu.
Enter PIN "0000" if prompted.
Confirm successful pairing on both devices.
For calls: Use phonebook sync and call history features.
For audio: Stream music from paired devices.

WARNING! Do not operate Bluetooth functions while driving. Park safely first.

Audio Settings

Equalizer Settings: FLAT, POP, ROCK, JAZZ, CLASSIC, USER. Sound Controls: LOUDNESS (On/Off), SUBWOOFER control, HPF settings. Advanced Features: Time alignment, crossover settings.

Care & Maintenance

Use soft, dry cloth for cleaning display and controls. Avoid chemical cleaners. Keep CDs clean and free of scratches.

CAUTION! Do not use abrasive materials or liquids on the unit. Avoid extreme temperatures.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check fuse and wiring connections; verify battery connection.
Bluetooth not connecting	Pairing/distance	Ensure pairing mode; move device closer; delete old pairings.
No sound from speakers	Wiring/settings	Check speaker connections; verify balance/fader settings.
CD not playing	Disc/format	Ensure compatible disc format; clean disc; check for scratches.
USB not recognized	Format/capacity	Use FAT32 format; ensure USB under 32GB; try different device.

Reset: Hold SETUP button for 10 seconds to reset to factory defaults.

Service: 1-800-536-9663; www.kenwood.com