Kenwood KDC HD262U Manual

The Kenwood KDC HD262U is a single-DIN car stereo receiver featuring HD Radio technology, USB connectivity, auxiliary input, CD playback, and 50W x 4 channel output. With built-in Bluetooth for hands-free calling and audio streaming, variable color illumination, and customizable audio settings, this receiver offers versatile in-car entertainment. Below are key sections for features, installation, operation, settings, and troubleshooting.

1. Features at a Glance 2. Installation 3. Basic Operation 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Bluetooth Setup 8. Audio Settings 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit, Remote Control, Wiring harness, Installation hardware, User manual.

Feature	Description
HD Radio	Digital radio reception with crystal-clear sound
Bluetooth	Hands-free calling and audio streaming
USB Port	For iPod/iPhone and USB storage devices
Auxiliary Input	3.5mm jack for external audio sources
CD Playback	Plays CD, CD-R, CD-RW formats
Power Output	50W x 4 channels (max)
Variable Color	Adjustable display illumination
Preset Memory	18 FM/6 AM station presets
Steering Wheel Control	Compatible with optional interface
Security	Detachable faceplate

Installation

Prepare vehicle and gather necessary tools before installation.

Disconnect negative battery terminal for safety.
Remove existing stereo using removal tools.
Connect wiring harness following color codes: red (ignition), yellow (battery), black (ground).
Connect antenna cable and all audio inputs.
Secure unit in dashboard and test functionality.

WARNING! Always disconnect battery before installation to prevent electrical shorts. Ensure proper grounding.

Basic Operation

Power on unit; familiarize with basic controls.

Source Selection: Press SOURCE to cycle through radio, CD, USB, BT, AUX.
Volume Control: Turn knob or use remote volume buttons.
Radio Tuning: Use TUNE buttons or seek function for stations.
CD Operation: Insert disc for automatic playback; use skip buttons.
USB Playback: Connect device for music playback and charging.

CAUTION! Do not operate while driving. Set all controls before driving.

Specifications

Power Output: 50W x 4 (Max), 22W x 4 (RMS)
Tuner: FM/AM with HD Radio capability
Frequency Response: 20Hz - 20kHz
Signal-to-Noise: 80dB
Preset Stations: 18 FM, 6 AM
Bluetooth: Version 2.1 + EDR
USB: Supports MP3, WMA playback
CD Formats: CD, CD-R, CD-RW (MP3/WMA)
Power Requirement: 12V DC, negative ground
Dimensions: 178mm x 50mm x 159mm

Controls and Settings

Front Panel: Power/Volume knob, SOURCE, BAND, MENU, EJECT.

Remote: Power, Volume, Source, Preset, Play/Pause, Track Skip.

Audio Settings: Bass, Treble, Balance, Fader, Loudness. Display: Dimmer, Color Settings. Radio: Auto Store, Local/Distance. System: Clock, Beep, Language, Reset.

Connecting Devices

USB: Front panel port for devices and charging. AUX: 3.5mm input for external players. Bluetooth: Wireless audio and phone.

Turn off unit before connecting devices.
Use quality cables for best audio performance.
Select appropriate source mode for connected device.

Tip: Format USB devices to FAT32 for optimal compatibility.

Bluetooth Setup

Pair mobile devices for hands-free operation.

Enable Bluetooth on mobile device.
Press SOURCE to select BT mode.
Enter PIN "0000" if prompted.
Accept pairing request on both devices.

WARNING! Keep firmware updated for best Bluetooth performance. Do not pair while driving.

Audio Settings

Customize sound to preference and vehicle acoustics.

Bass/Treble: ±10 levels adjustment
Balance/Fader: Adjust speaker output
Loudness: Boost low frequencies at low volumes
EQ Presets: Flat, Powerful, Vocal, Custom
Subwoofer: Control for external subwoofer systems

Care & Maintenance

Use soft, dry cloth for cleaning. Avoid chemicals and abrasives.

CAUTION! Remove faceplate when parking in hot conditions. Keep discs and USB devices away from direct sunlight.

Regulatory Information

FCC ID: A94-KDC HD262U. This device complies with Part 15 of FCC rules. Bluetooth is a registered trademark of Bluetooth SIG. For support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check fuse and wiring connections; verify battery connection.
No sound	Settings/speakers	Check volume, mute, speaker connections, fader settings.
Bluetooth not pairing	Distance/compatibility	Ensure device within range; delete old pairings; restart both devices.
USB not recognized	Format/cable	Reformat to FAT32; try different cable; check device compatibility.
CD skipping	Disc/dirty lens	Clean disc; use CD lens cleaner; avoid burned discs.

Reset: Hold SOURCE while turning on to factory reset.

Service: 1-800-536-9663; www.kenwood.com