Kenwood KDC MP2035 Instruction Manual

The Kenwood KDC MP2035 is a versatile car stereo system featuring CD/MP3 playback, AM/FM radio tuner, front auxiliary input, detachable faceplate security, 50W x 4 maximum power output, bass boost function, and customizable audio settings. Compatible with various audio formats and designed for easy installation in most vehicles. Below are key sections covering features, installation, operation, settings, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Security Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with CD/MP3 player, detachable faceplate, remote control, wiring harness, and mounting hardware.

Feature	Description
CD/MP3 Playback	Plays standard audio CDs and MP3 encoded discs
AM/FM Tuner	30 station presets (18 FM, 12 AM)
Front AUX Input	3.5mm jack for external audio devices
Detachable Faceplate	Security feature to prevent theft
Power Output	50W x 4 maximum power
Bass Boost	Adjustable low-frequency enhancement
Audio Controls	Bass, treble, balance, fader adjustments
LCD Display	Backlit display with track information
Clock Function	Built-in digital clock
Remote Control	Included for convenient operation

Installation

Unpack and verify all components. Ensure vehicle is turned off during installation.

Disconnect negative battery terminal for safety.
Remove existing stereo unit from dashboard.
Connect wiring harness following color-coded wires.
Secure unit in dashboard using mounting sleeve.
Reconnect battery and test functionality.

WARNING! Always disconnect vehicle battery before installation to prevent electrical shorts or damage.

First-Time Setup

Power on unit; configure initial settings.

Set clock: Press and hold CLOCK button, adjust time with tuning knob.
Program radio stations: Tune to desired station, press and hold preset button.
Adjust audio settings: Use BASS, TREBLE, BALANCE, FADER controls.
Configure security: Remove faceplate when leaving vehicle unattended.

CAUTION! Ensure proper wiring connections to avoid electrical issues.

Specifications

Power Output: 50W x 4 (Max), 22W x 4 (RMS)
CD Compatibility: CD, CD-R, CD-RW, MP3
Tuner Sensitivity: FM: 10.3 dBf, AM: 25 μV
Frequency Response: 20Hz - 20kHz
Signal-to-Noise Ratio: 95 dB (CD)
Audio Input: Front 3.5mm AUX jack
Power Requirement: 12V DC, negative ground
Dimensions: 178mm (W) x 50mm (H) x 153mm (D)

Controls and Settings

Front Panel: POWER/VOLUME knob, SOURCE button, BAND button, AUDIO controls, EJECT button.

Remote: POWER, VOLUME, SOURCE, TRACK UP/DOWN, PRESET buttons.

Audio Settings: Bass (-10 to +10), Treble (-10 to +10), Balance (L9 to R9), Fader (F9 to R9). Radio: Manual tuning, seek tuning, preset stations. CD/MP3: Play, pause, skip, repeat, random play.

Connecting Devices

AUX Input: Front 3.5mm jack for portable audio players. Speaker Connections: Standard speaker wire outputs.

Turn off unit before connecting devices.
Connect AUX cable from external device to front input.
Select AUX source using SOURCE button.
Adjust volume on both device and stereo unit.

Tip: Use quality cables for best audio performance and minimal interference.

Playing Media

Supports audio CDs and MP3 encoded discs.

Insert disc: Press EJECT, load CD label side up.
Play: Unit automatically begins playback; use TRACK buttons for navigation.
MP3 Navigation: Folder skip function for organized MP3 files.
Repeat/Random: Press RPT for repeat mode, RDM for random play.
Eject: Press EJECT button to remove disc.
Fast Forward/Rewind: Press and hold TRACK buttons.

WARNING! Do not use damaged or irregular shaped discs. Avoid extreme temperatures.

Security Features

Detachable Faceplate: Remove when parking in public areas. Anti-theft LED: Flashing indicator when faceplate removed.

Care & Maintenance

Clean with soft, dry cloth only. Avoid chemical cleaners. Store faceplate in protective case when removed.

CAUTION! Do not insert foreign objects into CD slot. Keep liquids away from unit.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check fuse and wiring connections; verify battery connection.
No sound	Speaker connections	Verify speaker wire connections; check volume settings.
CD won't play	Disc/loading	Ensure disc is clean and undamaged; check for proper insertion.
Poor radio reception	Antenna connection	Verify antenna is fully extended and properly connected.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear line of sight to unit.

Reset: Disconnect power for 30 seconds to reset unit.

Service: 1-800-536-9663; www.kenwood.com