Kenwood KDC MP3035 Manual

The Kenwood KDC MP3035 is a versatile car stereo system featuring CD/MP3 playback, AM/FM tuner, front auxiliary input, detachable faceplate security, 4-channel amplifier, high-power output, bass/treble controls, loudness function, and preset station memory. Compatible with various audio formats and designed for easy installation in most vehicles. Below are key sections for features, installation, operation, settings, and troubleshooting.

1. Features at a Glance 2. Installation 3. Basic Operation 4. Specifications 5. Controls and Settings 6. Audio Connections 7. Playing Media 8. Security Features 9. Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with CD/MP3 player, Remote Control, Wiring harness, Detachable faceplate, Front AUX input, Preset buttons, Volume knob.

Feature	Description
CD/MP3 Playback	Plays audio CDs and MP3 format discs
AM/FM Tuner	30 station presets (18 FM, 12 AM)
Front AUX Input	3.5mm jack for external audio devices
Detachable Faceplate	Security feature to prevent theft
4-Channel Amplifier	50W x 4 max power output
Bass/Treble Controls	Adjustable audio equalization
Loudness Function	Enhances bass at low volumes
Preset EQ	Multiple sound profiles (ROCK, POP, etc.)
Display Dimmer	Adjustable display brightness
Clock Function	Built-in digital clock

Installation

Disconnect vehicle battery before installation. Verify proper wiring connections.

Remove existing stereo: Use removal tools to extract current unit.
Connect wiring harness: Match color-coded wires (red-ignition, yellow-battery, black-ground).
Connect antenna: Plug antenna cable into rear port.
Mount unit: Slide into dashboard opening until secure.
Reconnect battery and test functions.

WARNING! Ensure proper grounding to prevent electrical damage. Use fuse protection.

Basic Operation

Power on unit; insert faceplate if detached.

Source selection: Press SOURCE to cycle through CD, Tuner, AUX.
Volume control: Turn knob or use remote volume buttons.
CD operation: Insert disc; press PLAY for automatic playback.
Tuner operation: Press BAND to select AM/FM; use SEEK to find stations.
Preset stations: Hold 1-6 buttons to store current station.

CAUTION! Do not operate while driving if it distracts from road safety.

Specifications

Power Output: 50W x 4 max (22W RMS)
Frequency Response: 10Hz - 20,000Hz
Signal-to-Noise Ratio: >95dB
Supported Formats: CD-DA, MP3, WMA
Preset EQ: FLAT, POP, ROCK, JAZZ, CLASSIC
Power Requirement: 12V DC negative ground
Dimensions: Standard DIN size (7" x 2")
Operating Temp: -20°C to 60°C

Controls and Settings

Front Panel: POWER/VOLUME knob, SOURCE, BAND, SEEK, AUX jack, Faceplate release.

Remote: POWER, Volume, MUTE, SOURCE, Preset buttons, SEEK, Playback controls.

Audio Settings: BASS, TREBLE, BALANCE, FADER, LOUDNESS, EQ presets. System Settings: Clock set, Display dimmer, Beep on/off, AUX enable. Tuner Settings: Local/distance reception, Preset scan.

Audio Connections

Speaker outputs: Front/Rear channels. AUX input: Front 3.5mm jack. Antenna input: Rear connector.

Speaker wiring: Connect positive/negative terminals correctly.
AUX device: Connect MP3 player/phone to front jack.
Power connections: Ensure proper battery/ignition wiring.

Tip: Use high-quality speakers for optimal sound performance.

Playing Media

Supports audio CDs, MP3 CDs, external AUX devices.

CD playback: Insert disc label-side up; auto-plays if enabled.
MP3 playback: Navigate folders using folder skip buttons.
Track selection: Use number buttons or SEEK for track skip.
Repeat/random: Press RPT for repeat; RDM for random play.
Fast forward/rewind: Hold SEEK buttons during playback.
AUX mode: Connect device; select AUX source.

WARNING! Do not use damaged discs. Keep liquids away from unit.

Security Features

Detachable Faceplate: Remove when parked to deter theft. Security Code: Optional code entry if power disconnected (default 0000).

Maintenance

Clean with dry cloth only. Store faceplate in protective case. Keep discs clean and scratch-free.

CAUTION! Do not use chemicals or abrasive cleaners on display.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check battery/ignition connections; verify fuse integrity.
No sound	Speaker wiring	Verify speaker connections; check volume/mute settings.
CD not playing	Disc/format	Ensure compatible disc format; clean disc surface.
Poor radio reception	Antenna	Check antenna connection; extend antenna fully.
Unit locked	Security code	Enter security code (default 0000) if prompted.

Reset: Disconnect battery for 5 minutes to reset unit.

Service: Contact authorized Kenwood service center for repairs.