kenwood kdc mp332 manual

The Kenwood KDC-MP332 is a CD receiver with MP3/WMA playback capability, built-in MOSFET 50Wx4 amplifier, detachable face security, 18FM/6AM presets, CD-R/RW compatibility, optional auxiliary input, and advanced audio controls. Features include loudness, subwoofer control, HPF/LPF filters, and source tone memory. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Security Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with detachable faceplate, remote control, wiring harness, mounting sleeve, and user manual.

Feature	Description
Power Output	MOSFET 50W x 4 (max)
Media Support	CD, CD-R/RW, MP3, WMA
Preset Memory	18 FM/6 AM stations
Security	Detachable faceplate
Audio Controls	Bass, Treble, Loudness, Balance, Fader
Filter Controls	HPF/LPF crossover networks
Display	Multi-color LCD with dimmer
Optional Input	Auxiliary input for external devices
Remote Control	Full-function wireless remote
Power Requirements	12V DC negative ground

Installation

Unpack and inspect contents. Verify vehicle compatibility.

Disconnect negative battery terminal for safety.
Install mounting sleeve into dashboard opening.
Connect wiring harness: Match color codes to vehicle wiring.
Connect antenna cable and optional devices.
Slide main unit into mounting sleeve until it clicks.
Reconnect battery and test operation.

WARNING! Disconnect battery before installation to prevent electrical shorts. Ensure proper grounding.

First-Time Setup

Power on unit; follow initial setup procedures.

Set clock: Press and hold CLOCK button, use tuning knob to set time.
Program radio stations: Tune to desired station, press and hold preset button.
Adjust audio settings: Use BASS, TREBLE, BALANCE, FADER controls.
Set security code: In menu, set 4-digit code for theft protection.
Configure display: Adjust dimmer and color settings.

CAUTION! Record security code in safe place. Unit will be inoperable without correct code.

Specifications

Power Output: 50W x 4 (Max), 22W x 4 (RMS)
Frequency Response: 10Hz - 20,000Hz
Signal-to-Noise Ratio: 105dB (CD)
Preset Stations: 18 FM, 6 AM
CD Compatibility: CD-DA, CD-R, CD-RW, MP3, WMA
Audio Controls: Bass ±10dB, Treble ±10dB, Loudness
Crossover: HPF 50/80/125Hz, LPF 50/80/125Hz
Power Requirement: 12V DC (10.8-16V)
Dimensions: 178mm(W) x 50mm(H) x 153mm(D)

Controls and Settings

Front Panel: POWER/VOLUME knob, SOURCE button, BAND button, AUDIO button, OPEN/CLOSE, Function buttons.

Remote Control: POWER, Numeric buttons, SOURCE, BAND, VOLUME, MUTE, PLAY/PAUSE, SKIP, AUDIO.

Audio Settings: BASS, TREBLE, LOUDNESS, BALANCE, FADER, SUBWOOFER control. Radio: Manual/auto seek, local/distance reception. CD/MP3: Repeat, random, scan, folder selection. Display: Dimmer, color selection, clock display.

Connecting Devices

Main connections: Power, speakers, antenna, optional auxiliary input.

Disconnect negative battery terminal before connecting.
Match wire colors: Yellow (constant power), Red (ignition power), Black (ground).
Connect speakers observing correct polarity.
Connect antenna cable to rear antenna port.
Optional: Connect auxiliary input cable for external audio sources.

Tip: Use crimp connectors or solder for secure connections. Test all functions before final installation.

Playing Media

Supports CD, CD-R/RW, MP3, WMA formats.

Insert disc: Press OPEN/CLOSE, load media label-side up.
Play: Unit auto-plays CD; press PLAY/PAUSE to control playback.
Skip tracks: Press >>| or |<< to skip forward/backward.
Scan: Press and hold >>| or |<< to fast forward/rewind.
MP3 navigation: Use folder buttons to navigate directories.
Repeat/Random: Press RPT or RDM for repeat/random play modes.
Stop: Press OPEN/CLOSE to stop and eject disc.

WARNING! Do not use damaged or irregular-shaped discs. Keep discs clean and free from scratches.

Security Features

Detachable Face Security: Remove faceplate when leaving vehicle. Security Code: 4-digit code prevents unauthorized use. Code Entry: Enter code using numeric buttons if unit displays "CODE".

Care & Cleaning

Use soft, dry cloth for cleaning. For stubborn stains, dampen cloth with water only. Do not use solvents or chemicals.

CAUTION! Never spray liquids directly on unit. Keep faceplate dry and store in protective case.

Regulatory Information

FCC Part 15: Class B digital device compliant. This device complies with part 15 of the FCC Rules. Copyright © Kenwood Corporation. All trademarks belong to their respective owners. For technical support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/connections	Check power connections; verify fuse; ensure proper grounding.
No sound	Speaker wiring/mute	Check speaker connections; ensure mute is off; verify audio settings.
Disc not playing	Disc format/damage	Ensure disc is compatible format; check for scratches; clean disc.
Radio poor reception	Antenna connection	Ensure antenna connected properly; check antenna condition.
Unit displays "CODE"	Security lock	Enter correct 4-digit security code; contact dealer if code lost.
Remote not working	Batteries/obstacles	Replace batteries; ensure clear line of sight to unit.

Reset: Disconnect power for 1 minute to reset unit (security code required after reset).

Service: 1-800-536-9663; www.kenwood.com