Kenwood KDC MP338 Manual

The Kenwood KDC MP338 is a CD receiver with MP3 playback capability, featuring 50W x 4 high power output, detachable face security, CD-R/RW compatibility, 24-bit digital-to-analog converter, preset equalizer, loudness, tuner with 18FM/6AM presets, and auxiliary input. Below are key sections for features, installation, operation, settings, and troubleshooting.

1. Features at a Glance 2. Installation 3. Basic Operation 4. Specifications 5. Controls and Functions 6. Audio Settings 7. Radio Operation 8. Security Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: CD/MP3 receiver, detachable faceplate, remote control, wiring harness, mounting sleeve.

Feature	Description
Power Output	50W x 4 channels (max)
CD/MP3 Playback	Supports CD, CD-R, CD-RW, MP3 files
Detachable Face	Security feature to prevent theft
24-bit DAC	High-quality digital-to-analog conversion
Preset EQ	6-band equalizer with multiple presets
Tuner	18 FM/6 AM station presets
Auxiliary Input	For external audio devices
Loudness	Enhances bass at low volumes
Remote Control	Included for convenient operation
Display	Multi-color LCD with adjustable illumination

Installation

Proper installation ensures optimal performance and safety.

Disconnect negative battery terminal before installation.
Connect wiring harness following color-coded wiring diagram.
Slide unit into mounting sleeve and secure with provided brackets.
Reconnect battery and test all functions.
Attach faceplate for normal operation.

WARNING! Ensure proper grounding and fuse protection. Professional installation recommended.

Basic Operation

Power on unit and follow these basic operations.

Source Selection: Press SOURCE to cycle through CD, Tuner, AUX.
Volume Control: Turn VOL knob or use remote control buttons.
CD Playback: Insert CD, playback starts automatically.
Track Selection: Use SEEK buttons or numeric keys for direct access.
Mode Selection: Press FUNCTION for various audio modes.

CAUTION! Do not operate while driving. Set controls before driving.

Specifications

Power Output: 50W x 4 (Max Power)
RMS Power: 22W x 4
Frequency Response: 10Hz - 20,000Hz
Signal-to-Noise Ratio: 105dB
Preset Stations: 18 FM / 6 AM
CD Formats: CD-DA, CD-R, CD-RW, MP3
MP3 Compatibility: ID3 Tag ver1.1
Power Requirement: 12V DC, negative ground
Dimensions: 7" W x 2" H x 6" D

Controls and Functions

Front Panel Controls: POWER/VOL knob, SOURCE, FUNCTION, SEEK/TRACK, EJECT, BAND.

Remote Control: POWER, Numeric buttons, SOURCE, VOLUME, MUTE, SEEK, BAND, DISP.

Display Functions: Clock, Track/Time display, Station frequency, Audio mode, Play mode. Basic Operations: Power on/off, Source selection, Volume adjustment, Track selection, Mode changes.

Audio Settings

Access audio settings by pressing and holding FUNCTION button.

Bass/Treble: Adjust from -7 to +7 levels.
Loudness: On/Off for bass enhancement at low volumes.
Balance/Fader: Adjust speaker balance and front/rear fader.
EQ Presets: POP, ROCK, JAZZ, CLASSIC, FLAT.
Subwoofer Control: Adjust subwoofer level if connected.

Tip: Reset to factory settings by holding FUNCTION + SEEK for 3 seconds.

Radio Operation

Tuner functions for AM/FM reception.

Band Selection: Press BAND to switch between FM1, FM2, FM3, AM.
Station Tuning: Use SEEK or manual tuning with TUNE buttons.
Preset Memory: Tune to station, hold preset button for 2 seconds.
Auto Store: Automatically stores 6 strongest stations.
Local/Distant: Switch reception sensitivity.

Note: For best reception, ensure antenna is properly connected and extended.

Security Features

Detachable Faceplate: Remove when parking to prevent theft. Security Code: 4-digit code can be set (default 0000).

Care & Maintenance

Use soft, dry cloth for cleaning. Avoid chemical cleaners. Keep discs clean and free of scratches.

CAUTION! Do not use solvents or abrasive cleaners. Keep faceplate dry.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check power connections; replace fuse if blown.
No sound	Speaker connections	Verify speaker wires connected properly; check mute function.
CD won't play	Disc format/damage	Ensure compatible disc format; clean disc surface.
Poor radio reception	Antenna connection	Check antenna connection; extend antenna fully.
Remote not working	Batteries/obstruction	Replace batteries; ensure clear path to IR sensor.

Reset: Disconnect battery for 1 minute to reset unit.

Service: Contact authorized Kenwood service center for repairs.